This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 11 03.4395 2461347.9395 10.53 09:54:52.73 +09:04:58.3
227.80525 44.64146 galactic Leo Second-epoch detections are separated by 0.7" and 6.5 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.6 Hebe 0 0 0 10.7 0 -0
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits at 09:54:52.73 +09:04:58.3: 15.67 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits at 09:54:52.73 +09:04:58.3: 15.76 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 11 03.4395* 09 54 52.73 +09 04 58.3 10.5 U Leo 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461347.9395,10.53,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261103.4395 10.53CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 11 03.4395 2461347.9395 11.51 10:33:59.10 +06:43:18.3
238.62089 51.53476 galactic Leo Second-epoch detections are separated by 0.8" and 6.7 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.10 Hygiea -1 1 2 11.7 -0 0
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits at 10:33:59.10 +06:43:18.3: 15.68 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits at 10:33:59.10 +06:43:18.3: 15.77 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 11 03.4395* 10 33 59.10 +06 43 18.3 11.5 U Leo 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461347.9395,11.51,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261103.4395 11.51CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 11 03.4395 2461347.9395 11.90 10:41:39.28 +07:52:57.3
238.92455 53.75525 galactic Leo Second-epoch detections are separated by 1.0" and 6.9 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.16 Psyche -2 1 2 12.2 0 0
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits at 10:41:39.28 +07:52:57.3: 15.77 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits at 10:41:39.28 +07:52:57.3: 15.86 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 11 03.4395* 10 41 39.28 +07 52 57.3 11.9 U Leo 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461347.9395,11.90,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261103.4395 11.90CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 11 03.4395 2461347.9395 13.19 10:29:42.11 +00:54:56.5
244.57702 47.08312 galactic Sex Second-epoch detections are separated by 0.2" and 6.7 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.386 Siegena 0 2 2 13.7 -0 0
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits at 10:29:42.11 +00:54:56.5: 15.76 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits at 10:29:42.11 +00:54:56.5: 15.79 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 11 03.4395* 10 29 42.11 +00 54 56.5 13.2 U Sex 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461347.9395,13.19,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261103.4395 13.19CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461139.75178127 09.04.2026 06:02:23.902 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
First image: 2461139.75178127 09.04.2026 06:02:23.902 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Last image: 2461347.93980521 03.11.2026 10:33:09.170 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 8
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.41
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 3 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 6133
Objects passed selection criteria: 6118
Measurements per detected object (mean, median, min, max): 3.1 4.0 2 4
Measurements per selected object (mean, median, min, max): 3.1 4.0 2 4
Average stars detected per image: 4940
Average stars matched: 4782.75 (96.8168 %)
Memory usage VmPeak: 232668 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Oct 15 15:05:03 CDT 2026
VaST build number 1.0rc89-241-g3eca6a38
OpenMP enabled: Yes
SExtractor version 2.25.2 (2026-10-15)
GNU bash, version 5.3.20(1)-release (x86_64-pc-linux-gnu)
Processing completed on Tue Nov 3 04:38:51 CST 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461139.75178127 09.04.2026 06:02:23.902 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
First image: 2461139.75178127 09.04.2026 06:02:23.902 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Last image: 2461347.93980521 03.11.2026 10:33:09.170 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 12
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.11
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 8 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 35303
Objects passed selection criteria: 35218
Measurements per detected object (mean, median, min, max): 2.8 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.8 2.0 2 4
Average stars detected per image: 26252.8
Average stars matched: 25099.8 (95.6081 %)
Memory usage VmPeak: 258904 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Oct 15 15:05:03 CDT 2026
VaST build number 1.0rc89-241-g3eca6a38
OpenMP enabled: Yes
SExtractor version 2.25.2 (2026-10-15)
GNU bash, version 5.3.20(1)-release (x86_64-pc-linux-gnu)
Processing completed on Tue Nov 3 04:40:36 CST 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ1b1x1/TTUQ1_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
SExtractor catalog cache: saved Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.cat to cache
SExtractor catalog cache: saved Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461347.93919940
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits exists and is non-empty
wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits exists and is non-empty
wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits exists and is non-empty
wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits (1st reference image)
verification OK: wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Image size: 941.5'x626.9' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 10:17:18.726 +06:01:18.91 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits (1st new image)
verification OK: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
Image size: 941.5'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 10:17:17.778 +05:57:43.24 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 10:17:18.726 +06:01:18.91
Second-epoch image center 10:17:17.778 +05:57:43.24
Angular distance between the image centers 0.0600 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits (2nd new image)
verification OK: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Image size: 941.4'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 10:17:15.269 +05:57:32.94 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 10:17:18.726 +06:01:18.91
Second-epoch image center 10:17:15.269 +05:57:32.94
Angular distance between the image centers 0.0644 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 10:17:17.778 +05:57:43.24
Second-epoch second image center 10:17:15.269 +05:57:32.94
Angular distance between the image centers 0.01078 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits &> /tmp/tmp.JvpvZ8gOwZ
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits &> /tmp/tmp.X3UqwtRCde
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits &> /tmp/tmp.Ul76YfIcEq
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits &> /tmp/tmp.r8S9AyDpBp
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Calibrating the magnitude scale
Found non-empty wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits and wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits and wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
Found non-empty wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits and wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
The reference image (wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits) and catalog (wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat) found
'wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat' -> 'wcsmag.cat'
Read 6357 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 146.2444 to 162.6276 deg, Dec +0.2896 to +11.6575 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 146.2444 to 162.6276 deg, Dec 0.2896 to 11.6575 deg
Loaded 5163 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3749 out of 3908 total matches.
Matched with Tycho-2 3908 out of 6357 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.787600
a=0.000000 b=1.000000 c=22.787600
From vast_summary.log: estimated ref. image limiting mag.: -7.41
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.38
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.38
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 6357 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 146.2444 to 162.6276 deg, Dec +0.2896 to +11.6575 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 146.2444 to 162.6276 deg, Dec 0.2896 to 11.6575 deg
Loaded 5163 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3749 out of 3908 total matches.
Matched with Tycho-2 3908 out of 6357 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Forced-photometry filter: calibrated wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits -> calib.txt_param_ref_wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits (aperture=6.4)
Read 6613 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 146.1393 to 162.6226 deg, Dec +0.1974 to +11.5943 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 146.1393 to 162.6226 deg, Dec 0.1974 to 11.5943 deg
Loaded 5214 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3758 out of 3932 total matches.
Matched with Tycho-2 3932 out of 6613 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
Forced-photometry filter: calibrated wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits -> calib.txt_param_ref_wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits (aperture=6.2)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 8 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.2 pix Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
2.1 pix Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
4.0 pix fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
4.0 pix fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Limiting magnitude estimates:
15.4 mag. Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
15.5 mag. Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
14.0 mag. fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
14.0 mag. fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
All-image limiting magnitude estimate: 14.0 (SNR ) 11.4 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
cp: cannot create regular file 'local_wcs_cache/': Not a directory
############ /tmp/tmp.JvpvZ8gOwZ (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits' -> 'wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
WCS_IMAGE_NAME=wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
WCS-calibrated image found: wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Checking if the catalog wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat corresponding to the image wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits alredy exist and is non-empty...
Catalog wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat corresponding to the image wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
WCS catalog name: wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=443, bad_region=0, passed=6357
Got 6357 stars (including 5904 good ones) from the SExtractor catalog wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
util/solve_plate_with_UCAC5 got 6357 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 451 to 510 (Dec 0.3 to 11.7)
Done reading UCAC5 zone files...
Matched 4619 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4609 matched stars entering correct_measured_positions(), 4609 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4609 matched stars entering correct_measured_positions(), 6357 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 451 to 510 (Dec 0.3 to 11.7)
Done reading UCAC5 zone files...
Matched 4619 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4608 matched stars entering correct_measured_positions(), 6357 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Accuracy estimation diagnostic: 4608 matched stars entering correct_measured_positions(), 6357 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Excluding outliers - 4608 stars left (next iteration limit 5069)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits N_match=4608 sigma_overall_arcsec=0.355 sigma_q1_arcsec=0.409 sigma_q2_arcsec=0.392 sigma_q3_arcsec=0.320 sigma_q4_arcsec=0.315 n_q1=1073 n_q2=1079 n_q3=1114 n_q4=1342 worst_quadrant_to_overall_ratio=1.152
WCS_HEADER_DIAG: file=Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits selection=current_pairs N_selected=4608 N_valid=4608 bias_ra_arcsec=-0.001 bias_dec_arcsec=-0.007 median_sep_arcsec=0.279 p95_sep_arcsec=0.876 n_q1=1073 n_q2=1079 n_q3=1114 n_q4=1342 occupied_cells_4x4=16/16
The image catalog is written to wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits -region wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.X3UqwtRCde (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits' -> 'wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
WCS_IMAGE_NAME=wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
WCS-calibrated image found: wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
Checking if the catalog wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat corresponding to the image wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits alredy exist and is non-empty...
Catalog wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat corresponding to the image wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
WCS catalog name: wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=465, bad_region=0, passed=6613
Got 6613 stars (including 6136 good ones) from the SExtractor catalog wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat
util/solve_plate_with_UCAC5 got 6613 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 450 to 509 (Dec 0.2 to 11.6)
Done reading UCAC5 zone files...
Matched 4621 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4611 matched stars entering correct_measured_positions(), 4611 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.26"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4611 matched stars entering correct_measured_positions(), 6613 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.26"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 450 to 509 (Dec 0.2 to 11.6)
Done reading UCAC5 zone files...
Matched 4621 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4612 matched stars entering correct_measured_positions(), 6613 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
Accuracy estimation diagnostic: 4612 matched stars entering correct_measured_positions(), 6613 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Excluding outliers - 4612 stars left (next iteration limit 5072)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits N_match=4612 sigma_overall_arcsec=0.323 sigma_q1_arcsec=0.332 sigma_q2_arcsec=0.344 sigma_q3_arcsec=0.296 sigma_q4_arcsec=0.301 n_q1=1075 n_q2=1092 n_q3=1110 n_q4=1335 worst_quadrant_to_overall_ratio=1.066
WCS_HEADER_DIAG: file=Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits selection=current_pairs N_selected=4612 N_valid=4612 bias_ra_arcsec=0.000 bias_dec_arcsec=-0.005 median_sep_arcsec=0.259 p95_sep_arcsec=0.892 n_q1=1075 n_q2=1092 n_q3=1110 n_q4=1335 occupied_cells_4x4=16/16
The image catalog is written to wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits -region wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.Ul76YfIcEq (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
WCS_IMAGE_NAME=wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
WCS-calibrated image found: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
Checking if the catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat corresponding to the image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits alredy exist and is non-empty...
Catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat corresponding to the image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
WCS catalog name: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=251, bad_region=0, passed=3463
Got 3463 stars (including 3209 good ones) from the SExtractor catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat
util/solve_plate_with_UCAC5 got 3463 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 452 to 508 (Dec 0.5 to 11.4)
Done reading UCAC5 zone files...
Matched 2961 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2952 matched stars entering correct_measured_positions(), 2952 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2952 matched stars entering correct_measured_positions(), 3462 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 452 to 508 (Dec 0.5 to 11.4)
Done reading UCAC5 zone files...
Matched 2962 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 2952 matched stars entering correct_measured_positions(), 3462 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Accuracy estimation diagnostic: 2952 matched stars entering correct_measured_positions(), 3462 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Excluding outliers - 2952 stars left (next iteration limit 3247)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=2952 robust_rms=13.790 arcsec worst_region_rms=26.025 arcsec outer_annulus_rms=26.025 arcsec
SIP_REFIT: SIP order 3 trial: matched=2952 robust_rms=0.500 arcsec worst_region_rms=0.749 arcsec outer_annulus_rms=0.749 arcsec
SIP_REFIT: SIP order 5 trial: matched=2952 robust_rms=0.392 arcsec worst_region_rms=0.534 arcsec outer_annulus_rms=0.534 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=2952 robust_rms_before=1.334 arcsec robust_rms_before_corrected=0.392 arcsec robust_rms_after=0.392 arcsec worst_region_rms_before=0.573 worst_region_rms_after=0.534 outer_annulus_rms_before=1.803 outer_annulus_rms_after=0.534
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.573 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits worst_region_rms_kept=0.573 arcsec robust_rms_kept=0.392 arcsec matched=2952
WCS_QUALITY_DIAG: file=fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits N_match=2952 sigma_overall_arcsec=0.364 sigma_q1_arcsec=0.377 sigma_q2_arcsec=0.409 sigma_q3_arcsec=0.307 sigma_q4_arcsec=0.385 n_q1=893 n_q2=598 n_q3=763 n_q4=698 worst_quadrant_to_overall_ratio=1.122
WCS_HEADER_DIAG: file=fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits selection=current_pairs N_selected=2952 N_valid=2952 bias_ra_arcsec=0.986 bias_dec_arcsec=0.296 median_sep_arcsec=1.207 p95_sep_arcsec=2.625 n_q1=893 n_q2=598 n_q3=763 n_q4=698 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits -region wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.r8S9AyDpBp (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
WCS_IMAGE_NAME=wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
WCS-calibrated image found: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Checking if the catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat corresponding to the image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits alredy exist and is non-empty...
Catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat corresponding to the image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
WCS catalog name: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=272, bad_region=0, passed=3499
Got 3499 stars (including 3225 good ones) from the SExtractor catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat
util/solve_plate_with_UCAC5 got 3499 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.4'
Seting catalog search parameters based on the expected field of view 941.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013075 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010460 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 452 to 508 (Dec 0.5 to 11.4)
Done reading UCAC5 zone files...
Matched 2972 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2965 matched stars entering correct_measured_positions(), 2965 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2965 matched stars entering correct_measured_positions(), 3498 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 452 to 508 (Dec 0.5 to 11.4)
Done reading UCAC5 zone files...
Matched 2974 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 2965 matched stars entering correct_measured_positions(), 3498 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Accuracy estimation diagnostic: 2965 matched stars entering correct_measured_positions(), 3498 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Excluding outliers - 2965 stars left (next iteration limit 3261)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=2965 robust_rms=13.884 arcsec worst_region_rms=25.626 arcsec outer_annulus_rms=25.626 arcsec
SIP_REFIT: SIP order 3 trial: matched=2965 robust_rms=0.509 arcsec worst_region_rms=0.682 arcsec outer_annulus_rms=0.682 arcsec
SIP_REFIT: SIP order 5 trial: matched=2965 robust_rms=0.363 arcsec worst_region_rms=0.494 arcsec outer_annulus_rms=0.494 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=2965 robust_rms_before=1.331 arcsec robust_rms_before_corrected=0.362 arcsec robust_rms_after=0.363 arcsec worst_region_rms_before=0.549 worst_region_rms_after=0.494 outer_annulus_rms_before=1.759 outer_annulus_rms_after=0.494
verification OK: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.sip_refit.BdowbN/candidate.fits
verification OK: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.sip_refit.BdowbN/candidate.fits
Image size: 941.6'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 10:17:15.237 +05:57:32.42 J2000 4789.000 3195.000
### Converting SExtractor-derived pixel positions to celestial coordinates using xy2sky from WCSTools ###
### Converted positions of 3499 stars ###
'wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.sip_refit.BdowbN/candidate.wcscat' -> 'vast_debug_catalog_before_xy2sky_correction_4114204.cat.log'
'wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.sip_refit.BdowbN/candidate.wcscat.xy2sky.fOL51r' -> 'vast_debug_catalog_after_xy2sky_correction_4114204.cat.log'
SIP_REFIT: applied the refit solution (order 5, robust RMS 1.331 -> 0.363 arcsec)
SIP_REFIT: re-matching the catalog with the refit solution (cycle 1, search radius 3.0 arcsec, 2965 pairs from the previous matching)
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 452 to 508 (Dec 0.5 to 11.4)
Done reading UCAC5 zone files...
Matched 2821 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
SIP_REFIT: re-match found 2821 pairs (2965 from the previous matching)
SIP_REFIT: SIP order 2 trial: matched=2821 robust_rms=13.779 arcsec worst_region_rms=25.871 arcsec outer_annulus_rms=25.871 arcsec
SIP_REFIT: SIP order 3 trial: matched=2821 robust_rms=0.506 arcsec worst_region_rms=0.680 arcsec outer_annulus_rms=0.680 arcsec
SIP_REFIT: SIP order 5 trial: matched=2821 robust_rms=0.361 arcsec worst_region_rms=0.489 arcsec outer_annulus_rms=0.489 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=2821 robust_rms_before=0.361 arcsec robust_rms_before_corrected=0.361 arcsec robust_rms_after=0.361 arcsec worst_region_rms_before=0.490 worst_region_rms_after=0.489 outer_annulus_rms_before=0.490 outer_annulus_rms_after=0.489
verification OK: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.sip_refit.HItzqP/candidate.fits
verification OK: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.sip_refit.HItzqP/candidate.fits
Image size: 941.6'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 10:17:15.237 +05:57:32.42 J2000 4789.000 3195.000
### Converting SExtractor-derived pixel positions to celestial coordinates using xy2sky from WCSTools ###
### Converted positions of 3499 stars ###
'wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.sip_refit.HItzqP/candidate.wcscat' -> 'vast_debug_catalog_before_xy2sky_correction_4118865.cat.log'
'wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.sip_refit.HItzqP/candidate.wcscat.xy2sky.YFBwdo' -> 'vast_debug_catalog_after_xy2sky_correction_4118865.cat.log'
SIP_REFIT: applied the refit solution (order 5, robust RMS 0.361 -> 0.361 arcsec)
Accuracy estimation diagnostic: 2821 matched stars entering correct_measured_positions(), 3497 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Accuracy estimation diagnostic: 2821 matched stars entering correct_measured_positions(), 3497 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
WCS_QUALITY_DIAG: file=fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits N_match=2821 sigma_overall_arcsec=0.367 sigma_q1_arcsec=0.363 sigma_q2_arcsec=0.418 sigma_q3_arcsec=0.339 sigma_q4_arcsec=0.365 n_q1=861 n_q2=563 n_q3=737 n_q4=660 worst_quadrant_to_overall_ratio=1.140
WCS_HEADER_DIAG: file=fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits selection=current_pairs N_selected=2821 N_valid=2821 bias_ra_arcsec=0.001 bias_dec_arcsec=-0.002 median_sep_arcsec=0.294 p95_sep_arcsec=0.997 n_q1=861 n_q2=563 n_q3=737 n_q4=660 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits -region wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
Saving the final (post-refit) wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits to local_wcs_cache/
'wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits' -> 'local_wcs_cache/wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits'
Saving the final (post-refit) wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits to local_wcs_cache/
'wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits' -> 'local_wcs_cache/wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits'
Saving the final (post-refit) wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits to local_wcs_cache/
'wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits' -> 'local_wcs_cache/wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits'
Saving the final (post-refit) wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits to local_wcs_cache/
'wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits' -> 'local_wcs_cache/wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits'
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits sigma_overall=0.355 worst_q_ratio=1.152
ref2=Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits sigma_overall=0.323 worst_q_ratio=1.066
new1=fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits sigma_overall=0.364 worst_q_ratio=1.122
new2=fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits sigma_overall=0.367 worst_q_ratio=1.140
reference average sigma_overall=0.339 worst_q_ratio=1.109
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153_astrometric_residuals.png (4608 matched stars from wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.32 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145_astrometric_residuals.png (4612 matched stars from wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.28 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501_astrometric_residuals.png (2952 matched stars from wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.33 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502_astrometric_residuals.png (2821 matched stars from wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.26 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits'
Saving fully-calibrated image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits'
Preparing the HTML report for the field Sex-01-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits at 09:54:52.73 +09:04:58.3: 15.67 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits at 10:33:59.10 +06:43:18.3: 15.68 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits at 10:33:59.10 +06:43:18.3: 15.77 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits at 09:54:52.73 +09:04:58.3: 15.76 +/- 99.00 upperlimit
Adding exclusion_list_local.txt__out20531.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out20587.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 54s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 1s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20531_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
Preparing report for the candidate 20531_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20535_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 20535_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
Rejecting candidate due to large distance (15.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20545_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 20545_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
Rejecting candidate due to large distance (16.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20551_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 20551_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
Rejecting candidate due to large distance (11.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20554_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 20554_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
Rejecting candidate due to large distance (12.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20563_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 20563_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
Rejecting candidate due to large distance (19.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20587_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
Preparing report for the candidate 20587_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 00159_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 00159_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
Rejecting candidate due to large distance (11.2") between the two second-epoch detections
make_report_in_HTML.sh Phase 2 (HTML assembly): 1s
make_report_in_HTML.sh TOTAL: 56s
Prepared the HTML report for the field Sex-01-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
09:54:52.73 +09:04:58.3
10:33:59.10 +06:43:18.3
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
SExtractor catalog cache: saved Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.cat to cache
SExtractor catalog cache: saved Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Creating symlink local_wcs_cache/wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
Creating symlink local_wcs_cache/wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
Creating symlink local_wcs_cache/wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits exists and is non-empty
wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits exists and is non-empty
wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits exists and is non-empty
wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits (1st reference image)
verification OK: wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Image size: 941.5'x626.9' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 10:17:18.726 +06:01:18.91 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits (1st new image)
verification OK: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
Image size: 941.5'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 10:17:17.778 +05:57:43.24 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 10:17:18.726 +06:01:18.91
Second-epoch image center 10:17:17.778 +05:57:43.24
Angular distance between the image centers 0.0600 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits (2nd new image)
verification OK: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Image size: 941.6'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 10:17:15.237 +05:57:32.42 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 10:17:18.726 +06:01:18.91
Second-epoch image center 10:17:15.237 +05:57:32.42
Angular distance between the image centers 0.0646 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 10:17:17.778 +05:57:43.24
Second-epoch second image center 10:17:15.237 +05:57:32.42
Angular distance between the image centers 0.01095 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits &> /tmp/tmp.0LfnnUTyit
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits &> /tmp/tmp.FbtZ5dVpiF
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits &> /tmp/tmp.nwwVcPLqJW
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits &> /tmp/tmp.X4kv4NWZLn
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Calibrating the magnitude scale
Found non-empty wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits and wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits and wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
Found non-empty wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits and wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
The reference image (wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits) and catalog (wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat) found
'wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat' -> 'wcsmag.cat'
Read 37544 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 146.1658 to 162.6543 deg, Dec +0.2262 to +11.7212 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 146.1658 to 162.6543 deg, Dec 0.2262 to 11.7212 deg
Loaded 5245 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3706 out of 4067 total matches.
Matched with Tycho-2 4067 out of 37544 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.660250
a=0.000000 b=1.000000 c=22.660250
From vast_summary.log: estimated ref. image limiting mag.: -7.11
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.55
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.55
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 37544 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 146.1658 to 162.6543 deg, Dec +0.2262 to +11.7212 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 146.1658 to 162.6543 deg, Dec 0.2262 to 11.7212 deg
Loaded 5245 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3706 out of 4067 total matches.
Matched with Tycho-2 4067 out of 37544 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Forced-photometry filter: calibrated wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits -> calib.txt_param_ref_wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits (aperture=4.9)
Read 39278 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 146.1282 to 162.6363 deg, Dec +0.1777 to +11.6675 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 146.1282 to 162.6363 deg, Dec 0.1777 to 11.6675 deg
Loaded 5263 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3707 out of 4078 total matches.
Matched with Tycho-2 4078 out of 39278 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
Forced-photometry filter: calibrated wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits -> calib.txt_param_ref_wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits (aperture=4.8)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 11 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.1 pix Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
2.0 pix Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
3.8 pix fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
3.7 pix fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Limiting magnitude estimates:
15.5 mag. Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
15.6 mag. Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
16.0 mag. fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
16.6 mag. fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
All-image limiting magnitude estimate: 16.0 (SNR ) 13.3 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.0LfnnUTyit (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits' -> 'wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
WCS_IMAGE_NAME=wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
WCS-calibrated image found: wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
Checking if the catalog wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat corresponding to the image wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits alredy exist and is non-empty...
Catalog wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat corresponding to the image wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits
WCS catalog name: wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=14, blended=1594, bad_region=8, passed=37530
Got 37530 stars (including 35876 good ones) from the SExtractor catalog wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat
util/solve_plate_with_UCAC5 got 37530 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 451 to 510 (Dec 0.2 to 11.7)
Done reading UCAC5 zone files...
Matched 4619 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4612 matched stars entering correct_measured_positions(), 4612 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4612 matched stars entering correct_measured_positions(), 37530 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 451 to 510 (Dec 0.2 to 11.7)
Done reading UCAC5 zone files...
Matched 4619 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4612 matched stars entering correct_measured_positions(), 37530 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Accuracy estimation diagnostic: 4612 matched stars entering correct_measured_positions(), 37530 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Excluding outliers - 4612 stars left (next iteration limit 5073)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits N_match=4612 sigma_overall_arcsec=0.337 sigma_q1_arcsec=0.382 sigma_q2_arcsec=0.372 sigma_q3_arcsec=0.305 sigma_q4_arcsec=0.306 n_q1=1063 n_q2=1076 n_q3=1138 n_q4=1335 worst_quadrant_to_overall_ratio=1.134
WCS_HEADER_DIAG: file=Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits selection=current_pairs N_selected=4612 N_valid=4612 bias_ra_arcsec=-0.011 bias_dec_arcsec=0.004 median_sep_arcsec=0.274 p95_sep_arcsec=0.848 n_q1=1063 n_q2=1076 n_q3=1138 n_q4=1335 occupied_cells_4x4=16/16
The image catalog is written to wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits -region wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.FbtZ5dVpiF (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits' -> 'wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
WCS_IMAGE_NAME=wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
WCS-calibrated image found: wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
Checking if the catalog wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat corresponding to the image wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits alredy exist and is non-empty...
Catalog wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat corresponding to the image wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits
WCS catalog name: wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=20, blended=1637, bad_region=31, passed=39258
Got 39258 stars (including 37502 good ones) from the SExtractor catalog wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat
util/solve_plate_with_UCAC5 got 39258 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 450 to 510 (Dec 0.2 to 11.7)
Done reading UCAC5 zone files...
Matched 4615 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4608 matched stars entering correct_measured_positions(), 4608 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.26"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4608 matched stars entering correct_measured_positions(), 39258 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.26"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 450 to 510 (Dec 0.2 to 11.7)
Done reading UCAC5 zone files...
Matched 4615 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4608 matched stars entering correct_measured_positions(), 39258 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.26"
Accuracy estimation diagnostic: 4608 matched stars entering correct_measured_positions(), 39258 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Excluding outliers - 4608 stars left (next iteration limit 5068)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits N_match=4608 sigma_overall_arcsec=0.310 sigma_q1_arcsec=0.331 sigma_q2_arcsec=0.340 sigma_q3_arcsec=0.299 sigma_q4_arcsec=0.289 n_q1=1072 n_q2=1081 n_q3=1124 n_q4=1331 worst_quadrant_to_overall_ratio=1.094
WCS_HEADER_DIAG: file=Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits selection=current_pairs N_selected=4608 N_valid=4608 bias_ra_arcsec=-0.010 bias_dec_arcsec=-0.002 median_sep_arcsec=0.254 p95_sep_arcsec=0.872 n_q1=1072 n_q2=1081 n_q3=1124 n_q4=1331 occupied_cells_4x4=16/16
The image catalog is written to wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits -region wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.nwwVcPLqJW (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
WCS_IMAGE_NAME=wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
WCS-calibrated image found: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
Checking if the catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat corresponding to the image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits alredy exist and is non-empty...
Catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat corresponding to the image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
WCS catalog name: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=20, no_mag_err=0, low_SNR=10, blended=687, bad_region=18, passed=14585
Got 14585 stars (including 13862 good ones) from the SExtractor catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat
util/solve_plate_with_UCAC5 got 14585 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 452 to 508 (Dec 0.4 to 11.4)
Done reading UCAC5 zone files...
Matched 4613 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4605 matched stars entering correct_measured_positions(), 4605 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.44"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4605 matched stars entering correct_measured_positions(), 14541 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.43"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 452 to 508 (Dec 0.4 to 11.4)
Done reading UCAC5 zone files...
Matched 4614 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4605 matched stars entering correct_measured_positions(), 14541 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.43"
Accuracy estimation diagnostic: 4605 matched stars entering correct_measured_positions(), 14541 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.44"
Excluding outliers - 4605 stars left (next iteration limit 5065)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: SIP order 2 trial: matched=4605 robust_rms=13.556 arcsec worst_region_rms=26.679 arcsec outer_annulus_rms=26.679 arcsec
SIP_REFIT: SIP order 3 trial: matched=4605 robust_rms=0.600 arcsec worst_region_rms=0.816 arcsec outer_annulus_rms=0.816 arcsec
SIP_REFIT: SIP order 5 trial: matched=4605 robust_rms=0.484 arcsec worst_region_rms=0.615 arcsec outer_annulus_rms=0.615 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4605 robust_rms_before=1.381 arcsec robust_rms_before_corrected=0.465 arcsec robust_rms_after=0.484 arcsec worst_region_rms_before=0.622 worst_region_rms_after=0.615 outer_annulus_rms_before=1.830 outer_annulus_rms_after=0.615
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.622 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits worst_region_rms_kept=0.622 arcsec robust_rms_kept=0.465 arcsec matched=4605
WCS_QUALITY_DIAG: file=fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits N_match=4605 sigma_overall_arcsec=0.438 sigma_q1_arcsec=0.415 sigma_q2_arcsec=0.492 sigma_q3_arcsec=0.400 sigma_q4_arcsec=0.447 n_q1=1403 n_q2=984 n_q3=1167 n_q4=1051 worst_quadrant_to_overall_ratio=1.123
WCS_HEADER_DIAG: file=fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits selection=current_pairs N_selected=4605 N_valid=4605 bias_ra_arcsec=1.013 bias_dec_arcsec=0.302 median_sep_arcsec=1.236 p95_sep_arcsec=2.677 n_q1=1403 n_q2=984 n_q3=1167 n_q4=1051 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits -region wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.X4kv4NWZLn (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
WCS_IMAGE_NAME=wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
WCS-calibrated image found: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Checking if the catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat corresponding to the image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits alredy exist and is non-empty...
Catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat corresponding to the image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
WCS catalog name: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=26, no_mag_err=0, low_SNR=11, blended=597, bad_region=20, passed=14643
Got 14643 stars (including 14008 good ones) from the SExtractor catalog wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat
util/solve_plate_with_UCAC5 got 14643 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.6'
Seting catalog search parameters based on the expected field of view 941.6 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013078 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010462 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 452 to 508 (Dec 0.4 to 11.4)
Done reading UCAC5 zone files...
Matched 4609 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4600 matched stars entering correct_measured_positions(), 4600 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.42"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4600 matched stars entering correct_measured_positions(), 14600 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.41"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 452 to 508 (Dec 0.4 to 11.4)
Done reading UCAC5 zone files...
Matched 4609 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4601 matched stars entering correct_measured_positions(), 14600 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.42"
Accuracy estimation diagnostic: 4601 matched stars entering correct_measured_positions(), 14600 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.43"
Excluding outliers - 4601 stars left (next iteration limit 5060)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: SIP order 2 trial: matched=4601 robust_rms=13.607 arcsec worst_region_rms=26.396 arcsec outer_annulus_rms=26.396 arcsec
SIP_REFIT: SIP order 3 trial: matched=4601 robust_rms=0.598 arcsec worst_region_rms=0.736 arcsec outer_annulus_rms=0.736 arcsec
SIP_REFIT: SIP order 5 trial: matched=4601 robust_rms=0.458 arcsec worst_region_rms=0.557 arcsec outer_annulus_rms=0.557 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4601 robust_rms_before=0.454 arcsec robust_rms_before_corrected=0.451 arcsec robust_rms_after=0.458 arcsec worst_region_rms_before=0.558 worst_region_rms_after=0.557 outer_annulus_rms_before=0.558 outer_annulus_rms_after=0.557
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.558 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits worst_region_rms_kept=0.558 arcsec robust_rms_kept=0.451 arcsec matched=4601
WCS_QUALITY_DIAG: file=fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits N_match=4601 sigma_overall_arcsec=0.420 sigma_q1_arcsec=0.435 sigma_q2_arcsec=0.472 sigma_q3_arcsec=0.356 sigma_q4_arcsec=0.431 n_q1=1405 n_q2=984 n_q3=1163 n_q4=1049 worst_quadrant_to_overall_ratio=1.125
WCS_HEADER_DIAG: file=fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits selection=current_pairs N_selected=4601 N_valid=4601 bias_ra_arcsec=0.006 bias_dec_arcsec=-0.006 median_sep_arcsec=0.360 p95_sep_arcsec=1.311 n_q1=1405 n_q2=984 n_q3=1163 n_q4=1049 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits -region wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-32-16_20.00sec_-0.00C_LIGHTs_0501.fits
Saving fully-calibrated image wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Sex-01-Q1b1x1_043401_TTUQ1b1x1_3913036_LiiWm99T/wcs_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502.fits
Preparing the HTML report for the field Sex-01-Q1b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits at 10:41:39.28 +07:52:57.3: 15.77 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits at 09:49:44.71 +11:07:04.2: 13.00 +/- 0.03 detection
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-09_01-02-23_20.00sec_-4.90C_LIGHTs_0153.fits at 10:29:42.11 +00:54:56.5: 15.76 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits at 10:41:39.28 +07:52:57.3: 15.86 +/- 99.00 upperlimit
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits at 09:49:44.71 +11:07:04.2: 13.05 +/- 0.03 detection
Forced photometry on wcs_Sex-01-Q1b1x1_2026-04-16_00-10-57_20.00sec_-4.90C_LIGHTs_0145.fits at 10:29:42.11 +00:54:56.5: 15.79 +/- 99.00 upperlimit
Forced photometry reference-image weighted average: 13.03 +/- 0.02
Forced photometry filter REJECTED candidate at 09:49:44.71 +11:07:04.2: ref_mag=13.03 +/- 0.02 new_mean_mag=12.9321 delta=0.09 (need > 0.90)
Adding exclusion_list_local.txt__out54006.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out54259.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 54s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 1s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 53923_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 53923_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
**** FOUND 09:54:52.73 +09:04:58.3 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 53967_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 53967_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
**** FOUND 10:33:59.10 +06:43:18.3 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 53980_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 53980_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
**** FOUND 10:25:20.49 +08:45:08.8 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54006_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
Preparing report for the candidate 54006_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54022_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 54022_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
Rejecting candidate due to large distance (12.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54092_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 54092_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
**** FOUND 10:41:28.21 +08:34:31.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54143_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 54143_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
**** FOUND 10:25:23.32 +08:46:03.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54152_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 54152_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54213_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 54213_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks
**** FOUND 10:34:35.83 +01:46:32.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54259_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
Preparing report for the candidate 54259_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 33604_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502
The candidate 33604_fd_Sex-01-Q1b1x1_2026-11-03_04-33-09_20.00sec_0.00C_LIGHTs_0502 did not pass the final checks