This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 10 28.1968 2461341.6968 11.02 01:52:37.77 -13:00:46.6
171.34415 -69.89794 galactic Cet Second-epoch detections are separated by 0.4" and 9.9 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.532 Herculina -0 -1 1 10.8 0 0
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:52:37.77 -13:00:46.6: 15.80 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:52:37.77 -13:00:46.6: 15.80 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 10 28.1968* 01 52 37.77 -13 00 46.6 11.0 U Cet 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461341.6968,11.02,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261028.1968 11.02CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 10 28.1968 2461341.6968 11.97 01:55:14.22 -07:52:17.7
163.99764 -65.52078 galactic Cet Second-epoch detections are separated by 0.4" and 9.9 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.360 Carlova -0 0 0 12.1 0 0
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:55:14.22 -07:52:17.7: 15.99 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:55:14.22 -07:52:17.7: 15.98 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 10 28.1968* 01 55 14.22 -07 52 17.7 12.0 U Cet 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461341.6968,11.97,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261028.1968 11.97CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 10 28.1968 2461341.6968 13.05 01:59:40.82 -07:43:08.3
165.87093 -64.73719 galactic Cet Second-epoch detections are separated by 1.1" and 9.9 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.1093 Freda -1 -0 1 13.1 -0 -0
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:59:40.82 -07:43:08.3: 16.01 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:59:40.82 -07:43:08.3: 15.98 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 10 28.1968* 01 59 40.82 -07 43 08.3 13.1 U Cet 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461341.6968,13.05,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261028.1968 13.05CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 10 28.1968 2461341.6968 13.98 01:54:44.53 -09:58:27.8
166.95495 -67.26323 galactic Cet Second-epoch detections are separated by 1.4" and 10.1 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.891 Gunhild -0 0 0 14.1 0 0
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:54:44.53 -09:58:27.8: 15.93 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:54:44.53 -09:58:27.8: 15.95 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 10 28.1968* 01 54 44.53 -09 58 27.8 14.0 U Cet 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461341.6968,13.98,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261028.1968 13.98CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461032.64392579 23.12.2025 03:27:05.188 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
First image: 2461032.64392579 23.12.2025 03:27:05.188 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Last image: 2461341.69714890 28.10.2026 04:43:43.665 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 1
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.47
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 2 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 4494
Objects passed selection criteria: 4467
Measurements per detected object (mean, median, min, max): 2.6 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.6 2.0 2 4
Average stars detected per image: 2995.25
Average stars matched: 2819.75 (94.1407 %)
Memory usage VmPeak: 238072 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Oct 15 15:05:03 CDT 2026
VaST build number 1.0rc89-241-g3eca6a38
OpenMP enabled: Yes
SExtractor version 2.25.2 (2026-10-15)
GNU bash, version 5.3.20(1)-release (x86_64-pc-linux-gnu)
Processing completed on Tue Oct 27 23:56:15 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461032.64392579 23.12.2025 03:27:05.188 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
First image: 2461032.64392579 23.12.2025 03:27:05.188 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Last image: 2461341.69714890 28.10.2026 04:43:43.665 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 9
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.20
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 7 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 24124
Objects passed selection criteria: 24042
Measurements per detected object (mean, median, min, max): 2.7 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.7 2.0 2 4
Average stars detected per image: 17327.5
Average stars matched: 16108.8 (92.9664 %)
Memory usage VmPeak: 247828 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Oct 15 15:05:03 CDT 2026
VaST build number 1.0rc89-241-g3eca6a38
OpenMP enabled: Yes
SExtractor version 2.25.2 (2026-10-15)
GNU bash, version 5.3.20(1)-release (x86_64-pc-linux-gnu)
Processing completed on Tue Oct 27 23:57:25 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ2b1x1/TTUQ2_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
SExtractor catalog cache: saved Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.cat to cache
SExtractor catalog cache: saved Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461341.69640010
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits exists and is non-empty
wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits exists and is non-empty
wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits exists and is non-empty
wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits (1st reference image)
verification OK: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Image size: 941.5'x627.1' 15.7(deg)x10.5(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 01:42:51.887 -10:01:12.35 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits (1st new image)
verification OK: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
Image size: 937.1'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 01:42:51.699 -09:59:44.22 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 01:42:51.887 -10:01:12.35
Second-epoch image center 01:42:51.699 -09:59:44.22
Angular distance between the image centers 0.0245 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits (2nd new image)
verification OK: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Image size: 937.1'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 01:42:48.667 -09:59:05.69 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 01:42:51.887 -10:01:12.35
Second-epoch image center 01:42:48.667 -09:59:05.69
Angular distance between the image centers 0.0376 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 01:42:51.699 -09:59:44.22
Second-epoch second image center 01:42:48.667 -09:59:05.69
Angular distance between the image centers 0.01641 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits &> /tmp/tmp.2u75mhIcXW
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits &> /tmp/tmp.Fnb5caSA1N
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits &> /tmp/tmp.ozoeTvdUEi
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits &> /tmp/tmp.zgFKt070ac
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Calibrating the magnitude scale
Found non-empty wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits and wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits and wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
Found non-empty wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits and wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
The reference image (wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits) and catalog (wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat) found
'wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat' -> 'wcsmag.cat'
Read 5413 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.6951 to 33.9052 deg, Dec -15.3338 to -4.6054 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.6951 to 33.9052 deg, Dec -15.3338 to -4.6054 deg
Loaded 4186 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3306 out of 3435 total matches.
Matched with Tycho-2 3435 out of 5413 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.915050
a=0.000000 b=1.000000 c=22.915050
From vast_summary.log: estimated ref. image limiting mag.: -7.47
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.45
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.45
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 5413 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.6951 to 33.9052 deg, Dec -15.3338 to -4.6054 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.6951 to 33.9052 deg, Dec -15.3338 to -4.6054 deg
Loaded 4186 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3306 out of 3435 total matches.
Matched with Tycho-2 3435 out of 5413 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Forced-photometry filter: calibrated wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits -> calib.txt_param_ref_wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits (aperture=5.8)
Read 5432 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.7140 to 33.9201 deg, Dec -15.3337 to -4.6054 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.7140 to 33.9201 deg, Dec -15.3337 to -4.6054 deg
Loaded 4184 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3309 out of 3435 total matches.
Matched with Tycho-2 3435 out of 5432 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
Forced-photometry filter: calibrated wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits -> calib.txt_param_ref_wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits (aperture=5.8)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 1 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.0 pix Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
2.0 pix Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
2.3 pix fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
2.3 pix fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Limiting magnitude estimates:
15.4 mag. Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
15.4 mag. Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
14.3 mag. fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
14.3 mag. fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
All-image limiting magnitude estimate: 14.3 (SNR ) 11.1 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
cp: cannot create regular file 'local_wcs_cache/': Not a directory
############ /tmp/tmp.2u75mhIcXW (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits' -> 'wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
WCS_IMAGE_NAME=wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
WCS-calibrated image found: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Checking if the catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat corresponding to the image wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits alredy exist and is non-empty...
Catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat corresponding to the image wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
WCS catalog name: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=369, bad_region=1238, passed=5413
Got 5413 stars (including 3882 good ones) from the SExtractor catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
util/solve_plate_with_UCAC5 got 5413 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.6)
Done reading UCAC5 zone files...
Matched 3798 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3794 matched stars entering correct_measured_positions(), 3795 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.24"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3794 matched stars entering correct_measured_positions(), 4439 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.24"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.6)
Done reading UCAC5 zone files...
Matched 3798 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 3793 matched stars entering correct_measured_positions(), 4439 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.25"
Accuracy estimation diagnostic: 3793 matched stars entering correct_measured_positions(), 4439 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.25"
Excluding outliers - 3793 stars left (next iteration limit 4173)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits N_match=3793 sigma_overall_arcsec=0.276 sigma_q1_arcsec=0.342 sigma_q2_arcsec=0.264 sigma_q3_arcsec=0.249 sigma_q4_arcsec=0.249 n_q1=1186 n_q2=653 n_q3=1240 n_q4=714 worst_quadrant_to_overall_ratio=1.239
WCS_HEADER_DIAG: file=Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits selection=current_pairs N_selected=3793 N_valid=3793 bias_ra_arcsec=0.005 bias_dec_arcsec=0.001 median_sep_arcsec=0.238 p95_sep_arcsec=0.643 n_q1=1186 n_q2=653 n_q3=1240 n_q4=714 occupied_cells_4x4=16/16
The image catalog is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits -region wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.Fnb5caSA1N (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits' -> 'wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
WCS_IMAGE_NAME=wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
WCS-calibrated image found: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
Checking if the catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat corresponding to the image wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits alredy exist and is non-empty...
Catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat corresponding to the image wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
WCS catalog name: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=371, bad_region=1253, passed=5432
Got 5432 stars (including 3888 good ones) from the SExtractor catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat
util/solve_plate_with_UCAC5 got 5432 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.6)
Done reading UCAC5 zone files...
Matched 3803 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3799 matched stars entering correct_measured_positions(), 3800 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.24"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3799 matched stars entering correct_measured_positions(), 4450 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.23"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.6)
Done reading UCAC5 zone files...
Matched 3803 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 3799 matched stars entering correct_measured_positions(), 4450 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.24"
Accuracy estimation diagnostic: 3799 matched stars entering correct_measured_positions(), 4450 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.24"
Excluding outliers - 3799 stars left (next iteration limit 4178)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits N_match=3799 sigma_overall_arcsec=0.272 sigma_q1_arcsec=0.334 sigma_q2_arcsec=0.268 sigma_q3_arcsec=0.240 sigma_q4_arcsec=0.231 n_q1=1189 n_q2=670 n_q3=1236 n_q4=704 worst_quadrant_to_overall_ratio=1.228
WCS_HEADER_DIAG: file=Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits selection=current_pairs N_selected=3799 N_valid=3799 bias_ra_arcsec=-0.000 bias_dec_arcsec=0.004 median_sep_arcsec=0.237 p95_sep_arcsec=0.639 n_q1=1189 n_q2=670 n_q3=1236 n_q4=704 occupied_cells_4x4=16/16
The image catalog is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits -region wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.ozoeTvdUEi (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
WCS_IMAGE_NAME=wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
WCS-calibrated image found: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
Checking if the catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat corresponding to the image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat corresponding to the image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
WCS catalog name: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=255, bad_region=547, passed=2385
Got 2385 stars (including 1623 good ones) from the SExtractor catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat
util/solve_plate_with_UCAC5 got 2385 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.7)
Done reading UCAC5 zone files...
Matched 1596 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1594 matched stars entering correct_measured_positions(), 1594 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1594 matched stars entering correct_measured_positions(), 1907 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.7)
Done reading UCAC5 zone files...
Matched 1596 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 1594 matched stars entering correct_measured_positions(), 1907 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Accuracy estimation diagnostic: 1594 matched stars entering correct_measured_positions(), 1907 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Excluding outliers - 1594 stars left (next iteration limit 1753)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=1594 robust_rms=7.899 arcsec worst_region_rms=15.712 arcsec outer_annulus_rms=15.712 arcsec
SIP_REFIT: SIP order 3 trial: matched=1594 robust_rms=0.509 arcsec worst_region_rms=0.849 arcsec outer_annulus_rms=0.849 arcsec
SIP_REFIT: SIP order 5 trial: matched=1594 robust_rms=0.320 arcsec worst_region_rms=0.386 arcsec outer_annulus_rms=0.386 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=1594 robust_rms_before=1.007 arcsec robust_rms_before_corrected=0.331 arcsec robust_rms_after=0.320 arcsec worst_region_rms_before=0.422 worst_region_rms_after=0.386 outer_annulus_rms_before=0.999 outer_annulus_rms_after=0.386
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.422 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits worst_region_rms_kept=0.422 arcsec robust_rms_kept=0.331 arcsec matched=1594
WCS_QUALITY_DIAG: file=fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits N_match=1594 sigma_overall_arcsec=0.345 sigma_q1_arcsec=0.296 sigma_q2_arcsec=0.310 sigma_q3_arcsec=0.427 sigma_q4_arcsec=0.351 n_q1=517 n_q2=312 n_q3=473 n_q4=292 worst_quadrant_to_overall_ratio=1.239
WCS_HEADER_DIAG: file=fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits selection=current_pairs N_selected=1594 N_valid=1594 bias_ra_arcsec=-0.661 bias_dec_arcsec=0.513 median_sep_arcsec=0.935 p95_sep_arcsec=1.820 n_q1=517 n_q2=312 n_q3=473 n_q4=292 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits -region wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.zgFKt070ac (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
WCS_IMAGE_NAME=wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
WCS-calibrated image found: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Checking if the catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat corresponding to the image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat corresponding to the image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
WCS catalog name: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=246, bad_region=565, passed=2425
Got 2425 stars (including 1653 good ones) from the SExtractor catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat
util/solve_plate_with_UCAC5 got 2425 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.7)
Done reading UCAC5 zone files...
Matched 1629 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1627 matched stars entering correct_measured_positions(), 1627 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1627 matched stars entering correct_measured_positions(), 1944 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.7)
Done reading UCAC5 zone files...
Matched 1629 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 1627 matched stars entering correct_measured_positions(), 1944 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Accuracy estimation diagnostic: 1627 matched stars entering correct_measured_positions(), 1944 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Excluding outliers - 1627 stars left (next iteration limit 1789)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=1627 robust_rms=7.836 arcsec worst_region_rms=15.177 arcsec outer_annulus_rms=15.177 arcsec
SIP_REFIT: SIP order 3 trial: matched=1627 robust_rms=0.494 arcsec worst_region_rms=0.832 arcsec outer_annulus_rms=0.832 arcsec
SIP_REFIT: SIP order 5 trial: matched=1627 robust_rms=0.296 arcsec worst_region_rms=0.392 arcsec outer_annulus_rms=0.392 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=1627 robust_rms_before=1.015 arcsec robust_rms_before_corrected=0.298 arcsec robust_rms_after=0.296 arcsec worst_region_rms_before=0.403 worst_region_rms_after=0.392 outer_annulus_rms_before=1.048 outer_annulus_rms_after=0.392
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.403 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits worst_region_rms_kept=0.403 arcsec robust_rms_kept=0.298 arcsec matched=1627
WCS_QUALITY_DIAG: file=fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits N_match=1627 sigma_overall_arcsec=0.297 sigma_q1_arcsec=0.254 sigma_q2_arcsec=0.306 sigma_q3_arcsec=0.359 sigma_q4_arcsec=0.289 n_q1=532 n_q2=316 n_q3=478 n_q4=301 worst_quadrant_to_overall_ratio=1.208
WCS_HEADER_DIAG: file=fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits selection=current_pairs N_selected=1627 N_valid=1627 bias_ra_arcsec=-0.673 bias_dec_arcsec=0.513 median_sep_arcsec=0.935 p95_sep_arcsec=1.777 n_q1=532 n_q2=316 n_q3=478 n_q4=301 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits -region wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
Saving the final (post-refit) wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits to local_wcs_cache/
'wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits' -> 'local_wcs_cache/wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits'
Saving the final (post-refit) wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits to local_wcs_cache/
'wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits' -> 'local_wcs_cache/wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits'
Saving the final (post-refit) wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits to local_wcs_cache/
'wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits' -> 'local_wcs_cache/wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits'
Saving the final (post-refit) wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits to local_wcs_cache/
'wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits' -> 'local_wcs_cache/wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits'
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits sigma_overall=0.276 worst_q_ratio=1.239
ref2=Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits sigma_overall=0.272 worst_q_ratio=1.228
new1=fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits sigma_overall=0.345 worst_q_ratio=1.239
new2=fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits sigma_overall=0.297 worst_q_ratio=1.208
reference average sigma_overall=0.274 worst_q_ratio=1.2335
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111_astrometric_residuals.png (3793 matched stars from wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.25 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112_astrometric_residuals.png (3799 matched stars from wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.24 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244_astrometric_residuals.png (1594 matched stars from wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.30 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245_astrometric_residuals.png (1627 matched stars from wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.26 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits'
Saving fully-calibrated image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits'
Preparing the HTML report for the field Cet-07-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:52:37.77 -13:00:46.6: 15.80 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:52:37.77 -13:00:46.6: 15.80 +/- 99.00 upperlimit
Adding exclusion_list_local.txt__out20511.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 30s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 1s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20511_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
Preparing report for the candidate 20511_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
make_report_in_HTML.sh Phase 2 (HTML assembly): 0s
make_report_in_HTML.sh TOTAL: 31s
Prepared the HTML report for the field Cet-07-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
01:52:37.77 -13:00:46.6
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
SExtractor catalog cache: saved Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.cat to cache
SExtractor catalog cache: saved Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Creating symlink local_wcs_cache/wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
Creating symlink local_wcs_cache/wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
Creating symlink local_wcs_cache/wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits exists and is non-empty
wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits exists and is non-empty
wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits exists and is non-empty
wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits (1st reference image)
verification OK: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Image size: 941.5'x627.1' 15.7(deg)x10.5(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 01:42:51.887 -10:01:12.35 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits (1st new image)
verification OK: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
Image size: 937.1'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 01:42:51.699 -09:59:44.22 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 01:42:51.887 -10:01:12.35
Second-epoch image center 01:42:51.699 -09:59:44.22
Angular distance between the image centers 0.0245 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits (2nd new image)
verification OK: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Image size: 937.1'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 01:42:48.667 -09:59:05.69 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 01:42:51.887 -10:01:12.35
Second-epoch image center 01:42:48.667 -09:59:05.69
Angular distance between the image centers 0.0376 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 01:42:51.699 -09:59:44.22
Second-epoch second image center 01:42:48.667 -09:59:05.69
Angular distance between the image centers 0.01641 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits &> /tmp/tmp.sHFjBhyLJZ
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits &> /tmp/tmp.Qo8v6u0Z55
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits &> /tmp/tmp.lzcndkyGNQ
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits &> /tmp/tmp.FpI8LEgLTL
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Calibrating the magnitude scale
Found non-empty wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits and wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits and wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
Found non-empty wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits and wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
The reference image (wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits) and catalog (wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat) found
'wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat' -> 'wcsmag.cat'
Read 28292 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.6948 to 33.9309 deg, Dec -15.3404 to -4.5625 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.6948 to 33.9309 deg, Dec -15.3404 to -4.5625 deg
Loaded 4228 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3275 out of 3520 total matches.
Matched with Tycho-2 3520 out of 28292 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.816800
a=0.000000 b=1.000000 c=22.816800
From vast_summary.log: estimated ref. image limiting mag.: -7.20
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.62
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.62
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 28292 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.6948 to 33.9309 deg, Dec -15.3404 to -4.5625 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.6948 to 33.9309 deg, Dec -15.3404 to -4.5625 deg
Loaded 4228 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3275 out of 3520 total matches.
Matched with Tycho-2 3520 out of 28292 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Forced-photometry filter: calibrated wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits -> calib.txt_param_ref_wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits (aperture=4.7)
Read 28381 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.6971 to 33.9326 deg, Dec -15.3394 to -4.5622 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.6971 to 33.9326 deg, Dec -15.3394 to -4.5622 deg
Loaded 4228 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3270 out of 3519 total matches.
Matched with Tycho-2 3519 out of 28381 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
Forced-photometry filter: calibrated wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits -> calib.txt_param_ref_wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits (aperture=4.7)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 8 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
1.9 pix Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
1.9 pix Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
2.1 pix fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
2.2 pix fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Limiting magnitude estimates:
15.6 mag. Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
15.6 mag. Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
14.4 mag. fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
14.4 mag. fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
All-image limiting magnitude estimate: 14.4 (SNR ) 13.7 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.sHFjBhyLJZ (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits' -> 'wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
WCS_IMAGE_NAME=wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
WCS-calibrated image found: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
Checking if the catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat corresponding to the image wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits alredy exist and is non-empty...
Catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat corresponding to the image wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits
WCS catalog name: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=4, blended=1018, bad_region=5253, passed=28288
Got 28288 stars (including 22183 good ones) from the SExtractor catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat
util/solve_plate_with_UCAC5 got 28288 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 429 (Dec -15.3 to -4.6)
Done reading UCAC5 zone files...
Matched 4890 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4886 matched stars entering correct_measured_positions(), 4886 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.25"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4886 matched stars entering correct_measured_positions(), 24181 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.25"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 429 (Dec -15.3 to -4.6)
Done reading UCAC5 zone files...
Matched 4890 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4886 matched stars entering correct_measured_positions(), 24181 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.25"
Accuracy estimation diagnostic: 4886 matched stars entering correct_measured_positions(), 24181 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.26"
Excluding outliers - 4886 stars left (next iteration limit 5374)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits N_match=4886 sigma_overall_arcsec=0.281 sigma_q1_arcsec=0.343 sigma_q2_arcsec=0.271 sigma_q3_arcsec=0.248 sigma_q4_arcsec=0.265 n_q1=1593 n_q2=837 n_q3=1572 n_q4=884 worst_quadrant_to_overall_ratio=1.221
WCS_HEADER_DIAG: file=Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits selection=current_pairs N_selected=4886 N_valid=4886 bias_ra_arcsec=0.004 bias_dec_arcsec=-0.000 median_sep_arcsec=0.244 p95_sep_arcsec=0.645 n_q1=1593 n_q2=837 n_q3=1572 n_q4=884 occupied_cells_4x4=16/16
The image catalog is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits -region wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.Qo8v6u0Z55 (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits' -> 'wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
WCS_IMAGE_NAME=wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
WCS-calibrated image found: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
Checking if the catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat corresponding to the image wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits alredy exist and is non-empty...
Catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat corresponding to the image wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits
WCS catalog name: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=10, blended=1046, bad_region=5235, passed=28371
Got 28371 stars (including 22251 good ones) from the SExtractor catalog wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat
util/solve_plate_with_UCAC5 got 28371 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 429 (Dec -15.3 to -4.6)
Done reading UCAC5 zone files...
Matched 4893 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4889 matched stars entering correct_measured_positions(), 4889 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.25"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4889 matched stars entering correct_measured_positions(), 24287 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.25"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 429 (Dec -15.3 to -4.6)
Done reading UCAC5 zone files...
Matched 4893 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4889 matched stars entering correct_measured_positions(), 24287 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.25"
Accuracy estimation diagnostic: 4889 matched stars entering correct_measured_positions(), 24287 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.26"
Excluding outliers - 4889 stars left (next iteration limit 5377)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits N_match=4889 sigma_overall_arcsec=0.275 sigma_q1_arcsec=0.328 sigma_q2_arcsec=0.270 sigma_q3_arcsec=0.241 sigma_q4_arcsec=0.254 n_q1=1585 n_q2=831 n_q3=1584 n_q4=889 worst_quadrant_to_overall_ratio=1.192
WCS_HEADER_DIAG: file=Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits selection=current_pairs N_selected=4889 N_valid=4889 bias_ra_arcsec=0.003 bias_dec_arcsec=-0.001 median_sep_arcsec=0.243 p95_sep_arcsec=0.641 n_q1=1585 n_q2=831 n_q3=1584 n_q4=889 occupied_cells_4x4=16/16
The image catalog is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits -region wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.lzcndkyGNQ (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
WCS_IMAGE_NAME=wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
WCS-calibrated image found: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
Checking if the catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat corresponding to the image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat corresponding to the image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
WCS catalog name: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=1, no_mag_err=0, low_SNR=6, blended=461, bad_region=2655, passed=14450
Got 14450 stars (including 11422 good ones) from the SExtractor catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat
util/solve_plate_with_UCAC5 got 14450 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4862 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 4855 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 12435 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4862 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 12435 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 12435 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.40"
Excluding outliers - 4855 stars left (next iteration limit 5340)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: SIP order 2 trial: matched=4855 robust_rms=7.535 arcsec worst_region_rms=13.855 arcsec outer_annulus_rms=13.855 arcsec
SIP_REFIT: SIP order 3 trial: matched=4855 robust_rms=0.573 arcsec worst_region_rms=0.901 arcsec outer_annulus_rms=0.901 arcsec
SIP_REFIT: SIP order 5 trial: matched=4855 robust_rms=0.413 arcsec worst_region_rms=0.493 arcsec outer_annulus_rms=0.493 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4855 robust_rms_before=1.037 arcsec robust_rms_before_corrected=0.412 arcsec robust_rms_after=0.413 arcsec worst_region_rms_before=0.474 worst_region_rms_after=0.493 outer_annulus_rms_before=1.029 outer_annulus_rms_after=0.493
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.474 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits worst_region_rms_kept=0.474 arcsec robust_rms_kept=0.412 arcsec matched=4855
WCS_QUALITY_DIAG: file=fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits N_match=4855 sigma_overall_arcsec=0.410 sigma_q1_arcsec=0.374 sigma_q2_arcsec=0.392 sigma_q3_arcsec=0.469 sigma_q4_arcsec=0.396 n_q1=1519 n_q2=912 n_q3=1494 n_q4=930 worst_quadrant_to_overall_ratio=1.143
WCS_HEADER_DIAG: file=fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits selection=current_pairs N_selected=4855 N_valid=4855 bias_ra_arcsec=-0.654 bias_dec_arcsec=0.528 median_sep_arcsec=0.958 p95_sep_arcsec=1.812 n_q1=1519 n_q2=912 n_q3=1494 n_q4=930 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits -region wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.FpI8LEgLTL (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
WCS_IMAGE_NAME=wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
WCS-calibrated image found: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Checking if the catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat corresponding to the image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat corresponding to the image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
WCS catalog name: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=6, blended=452, bad_region=2641, passed=14476
Got 14476 stars (including 11456 good ones) from the SExtractor catalog wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat
util/solve_plate_with_UCAC5 got 14476 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4859 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4851 matched stars entering correct_measured_positions(), 4851 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4851 matched stars entering correct_measured_positions(), 12492 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4858 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4849 matched stars entering correct_measured_positions(), 12492 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Accuracy estimation diagnostic: 4849 matched stars entering correct_measured_positions(), 12492 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Excluding outliers - 4849 stars left (next iteration limit 5336)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: SIP order 2 trial: matched=4849 robust_rms=7.581 arcsec worst_region_rms=13.435 arcsec outer_annulus_rms=13.435 arcsec
SIP_REFIT: SIP order 3 trial: matched=4849 robust_rms=0.570 arcsec worst_region_rms=0.884 arcsec outer_annulus_rms=0.884 arcsec
SIP_REFIT: SIP order 5 trial: matched=4849 robust_rms=0.397 arcsec worst_region_rms=0.525 arcsec outer_annulus_rms=0.525 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4849 robust_rms_before=1.037 arcsec robust_rms_before_corrected=0.394 arcsec robust_rms_after=0.397 arcsec worst_region_rms_before=0.526 worst_region_rms_after=0.525 outer_annulus_rms_before=1.075 outer_annulus_rms_after=0.525
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.526 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits worst_region_rms_kept=0.526 arcsec robust_rms_kept=0.394 arcsec matched=4849
WCS_QUALITY_DIAG: file=fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits N_match=4849 sigma_overall_arcsec=0.388 sigma_q1_arcsec=0.363 sigma_q2_arcsec=0.382 sigma_q3_arcsec=0.452 sigma_q4_arcsec=0.349 n_q1=1531 n_q2=913 n_q3=1473 n_q4=932 worst_quadrant_to_overall_ratio=1.165
WCS_HEADER_DIAG: file=fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits selection=current_pairs N_selected=4849 N_valid=4849 bias_ra_arcsec=-0.632 bias_dec_arcsec=0.522 median_sep_arcsec=0.946 p95_sep_arcsec=1.791 n_q1=1531 n_q2=913 n_q3=1473 n_q4=932 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits -region wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-42-38_20.00sec_-0.00C_LIGHT_0244.fits
Saving fully-calibrated image wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-10-27_CI_Cet-07-Q2b1x1_235107_TTUQ2b1x1_1437664_sfrVxfaR/wcs_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245.fits
Preparing the HTML report for the field Cet-07-Q2b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:33:18.81 -11:08:44.3: 13.49 +/- 0.04 detection
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:54:25.99 -11:51:24.8: 13.53 +/- 0.05 detection
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:59:40.82 -07:43:08.3: 16.01 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:52:45.56 -12:42:23.5: 13.05 +/- 0.03 detection
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:55:14.22 -07:52:17.7: 15.99 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:54:44.53 -09:58:27.8: 15.93 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-05_20.00sec_-15.00C_LIGHT_0111.fits at 01:50:03.57 -06:42:20.4: 13.63 +/- 0.05 detection
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:52:45.56 -12:42:23.5: 13.02 +/- 0.03 detection
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:33:18.81 -11:08:44.3: 13.38 +/- 0.03 detection
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:54:44.53 -09:58:27.8: 15.95 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:55:14.22 -07:52:17.7: 15.98 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:50:03.57 -06:42:20.4: 13.57 +/- 0.04 detection
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:54:25.99 -11:51:24.8: 13.47 +/- 0.05 detection
Forced photometry reference-image weighted average: 13.03 +/- 0.02
Forced photometry reference-image weighted average: 13.43 +/- 0.02
Forced photometry on wcs_Cet-07-Q2b1x1_2025-12-22_21-27-40_20.00sec_-15.00C_LIGHT_0112.fits at 01:59:40.82 -07:43:08.3: 15.98 +/- 99.00 upperlimit
Forced photometry filter REJECTED candidate at 01:52:45.56 -12:42:23.5: ref_mag=13.03 +/- 0.02 new_mean_mag=13.1856 delta=-0.15 (need > 0.90)
Forced photometry filter REJECTED candidate at 01:33:18.81 -11:08:44.3: ref_mag=13.43 +/- 0.02 new_mean_mag=13.4836 delta=-0.06 (need > 0.90)
Forced photometry reference-image weighted average: 13.50 +/- 0.03
Forced photometry reference-image weighted average: 13.60 +/- 0.03
Forced photometry filter REJECTED candidate at 01:54:25.99 -11:51:24.8: ref_mag=13.50 +/- 0.03 new_mean_mag=13.5162 delta=-0.01 (need > 0.90)
Forced photometry filter REJECTED candidate at 01:50:03.57 -06:42:20.4: ref_mag=13.60 +/- 0.03 new_mean_mag=13.6091 delta=-0.01 (need > 0.90)
Adding exclusion_list_local.txt__out32310.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out33261.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out34483.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 31s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 2s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31537_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
The candidate 31537_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31891_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
The candidate 31891_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245 did not pass the final checks
**** FOUND 01:52:37.78 -13:00:46.6 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32310_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
Preparing report for the candidate 32310_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 33261_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
Preparing report for the candidate 33261_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 33339_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
The candidate 33339_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 33871_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
The candidate 33871_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 33979_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245
The candidate 33979_fd_Cet-07-Q2b1x1_2026-10-27_23-43-43_20.00sec_0.00C_LIGHT_0245 did not pass the final checks