This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 09 09.4613 2461292.9613 12.54 09:17:11.29 +20:39:20.6
208.33518 40.95560 galactic Cnc Second-epoch detections are separated by 0.3" and 8.6 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.196 Philomela -0 -0 0 12.8 0 0
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:17:11.29 +20:39:20.6: 16.26 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:17:11.29 +20:39:20.6: 16.28 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461292.9613,12.54,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260909.4613 12.54CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 09 09.4613 2461292.9613 13.28 09:09:27.12 +23:41:21.3
203.81937 40.15543 galactic Cnc Second-epoch detections are separated by 1.7" and 8.6 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.87 Sylvia 0 0 0 13.7 0 -0
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:09:27.12 +23:41:21.3: 16.21 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:09:27.12 +23:41:21.3: 16.21 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461292.9613,13.28,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260909.4613 13.28CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 09 09.4613 2461292.9613 13.31 09:02:32.13 +20:34:13.3
207.01363 37.68176 galactic Cnc Second-epoch detections are separated by 2.3" and 8.7 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.245 Vera 0 0 1 13.9 -0 0
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:02:32.13 +20:34:13.3: 16.18 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:02:32.13 +20:34:13.3: 16.22 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461292.9613,13.31,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260909.4613 13.31CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 09 09.4613 2461292.9613 13.61 09:01:47.19 +23:56:40.4
202.86178 38.54591 galactic Cnc Second-epoch detections are separated by 1.5" and 8.7 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.134 Sophrosyne -0 0 0 14.1 0 0
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:01:47.19 +23:56:40.4: 16.18 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:01:47.19 +23:56:40.4: 16.22 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461292.9613,13.61,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260909.4613 13.61CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 09 09.4613 2461292.9613 13.66 09:00:02.44 +19:15:52.4
208.31304 36.69311 galactic Cnc Second-epoch detections are separated by 1.2" and 8.7 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.104 Klymene -0 -0 0 14.2 0 0
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:00:02.44 +19:15:52.4: 16.12 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:00:02.44 +19:15:52.4: 16.13 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461292.9613,13.66,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260909.4613 13.66CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 09 09.4613 2461292.9613 12.76 08:58:51.76 +23:32:55.2
203.09909 37.79121 galactic Cnc Second-epoch detections are separated by 0.6" and 8.7 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.68 Leto 0 -0 0 12.9 0 0
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 08:58:51.76 +23:32:55.2: 16.17 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 08:58:51.76 +23:32:55.2: 16.15 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461292.9613,12.76,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260909.4613 12.76CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461093.71707330 22.02.2026 05:12:25.133 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
First image: 2461093.71707330 22.02.2026 05:12:25.133 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Last image: 2461292.96160097 09.09.2026 11:04:32.324 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 4
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.54
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 4 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 6842
Objects passed selection criteria: 6815
Measurements per detected object (mean, median, min, max): 2.8 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.8 2.0 2 4
Average stars detected per image: 5013.25
Average stars matched: 4903.25 (97.8058 %)
Memory usage VmPeak: 233708 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Wed Sep 2 15:05:04 CDT 2026
VaST build number 1.0rc89-201-ga7d4d23b
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-09-02)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Wed Sep 9 06:45:09 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461093.71707330 22.02.2026 05:12:25.133 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
First image: 2461093.71707330 22.02.2026 05:12:25.133 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Last image: 2461292.96160097 09.09.2026 11:04:32.324 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 32
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.24
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 12 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 39237
Objects passed selection criteria: 39113
Measurements per detected object (mean, median, min, max): 2.9 3.0 2 4
Measurements per selected object (mean, median, min, max): 2.9 3.0 2 4
Average stars detected per image: 30413
Average stars matched: 29533 (97.1065 %)
Memory usage VmPeak: 264460 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Wed Sep 2 15:05:04 CDT 2026
VaST build number 1.0rc89-201-ga7d4d23b
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-09-02)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Wed Sep 9 06:45:52 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ2b1x1/TTUQ2_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
SExtractor catalog cache: saved Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.cat to cache
SExtractor catalog cache: saved Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461292.96099912
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits exists and is non-empty
wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits exists and is non-empty
wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits exists and is non-empty
wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits (1st reference image)
verification OK: wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Image size: 941.7'x627.1' 15.7(deg)x10.5(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 09:13:50.704 +21:59:59.79 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits (1st new image)
verification OK: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
Image size: 941.1'x624.5' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 09:13:38.855 +22:03:36.73 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 09:13:50.704 +21:59:59.79
Second-epoch image center 09:13:38.855 +22:03:36.73
Angular distance between the image centers 0.0757 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits (2nd new image)
verification OK: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Image size: 941.0'x624.5' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 09:13:36.530 +22:04:16.58 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 09:13:50.704 +21:59:59.79
Second-epoch image center 09:13:36.530 +22:04:16.58
Angular distance between the image centers 0.0899 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 09:13:38.855 +22:03:36.73
Second-epoch second image center 09:13:36.530 +22:04:16.58
Angular distance between the image centers 0.01425 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits &> /tmp/tmp.ToIgfVfopL
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits &> /tmp/tmp.qSKIj6RHT3
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits &> /tmp/tmp.oHyZAZknd0
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits &> /tmp/tmp.3ajZ8JQPk0
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Calibrating the magnitude scale
Found non-empty wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits and wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits and wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
Found non-empty wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits and wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
The reference image (wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits) and catalog (wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat) found
'wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat' -> 'wcsmag.cat'
Read 9058 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 129.4936 to 147.0580 deg, Dec +16.3325 to +27.3464 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 129.4936 to 147.0580 deg, Dec 16.3325 to 27.3464 deg
Loaded 6006 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4510 out of 4801 total matches.
Matched with Tycho-2 4801 out of 9058 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.920200
a=0.000000 b=1.000000 c=22.920200
From vast_summary.log: estimated ref. image limiting mag.: -7.54
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.38
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.38
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 9058 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 129.4936 to 147.0580 deg, Dec +16.3325 to +27.3464 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 129.4936 to 147.0580 deg, Dec 16.3325 to 27.3464 deg
Loaded 6006 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4510 out of 4801 total matches.
Matched with Tycho-2 4801 out of 9058 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Forced-photometry filter: calibrated wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits -> calib.txt_param_ref_wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits (aperture=6.3)
Read 9037 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 129.4936 to 147.0623 deg, Dec +16.3327 to +27.3523 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 129.4936 to 147.0623 deg, Dec 16.3327 to 27.3523 deg
Loaded 6008 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4486 out of 4794 total matches.
Matched with Tycho-2 4794 out of 9037 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
Forced-photometry filter: calibrated wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits -> calib.txt_param_ref_wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits (aperture=6.3)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 1 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.2 pix Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
2.2 pix Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
2.3 pix fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
2.3 pix fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Limiting magnitude estimates:
15.4 mag. Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
15.4 mag. Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
13.9 mag. fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
13.9 mag. fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
All-image limiting magnitude estimate: 13.9 (SNR ) 11.1 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
cp: cannot create regular file 'local_wcs_cache/': Not a directory
############ /tmp/tmp.ToIgfVfopL (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits' -> 'wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
WCS_IMAGE_NAME=wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
WCS-calibrated image found: wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Checking if the catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat corresponding to the image wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits alredy exist and is non-empty...
Catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat corresponding to the image wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
WCS catalog name: wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=691, bad_region=1800, passed=9058
Got 9058 stars (including 6676 good ones) from the SExtractor catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
util/solve_plate_with_UCAC5 got 9058 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.7'
Seting catalog search parameters based on the expected field of view 941.7 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013079 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010463 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 531 to 588 (Dec 16.3 to 27.3)
Done reading UCAC5 zone files...
Matched 4862 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4854 matched stars entering correct_measured_positions(), 4854 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4854 matched stars entering correct_measured_positions(), 7628 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 531 to 588 (Dec 16.3 to 27.3)
Done reading UCAC5 zone files...
Matched 4862 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 7628 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.34"
Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 7628 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Excluding outliers - 4855 stars left (next iteration limit 5339)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits N_match=4855 sigma_overall_arcsec=0.395 sigma_q1_arcsec=0.459 sigma_q2_arcsec=0.363 sigma_q3_arcsec=0.360 sigma_q4_arcsec=0.363 n_q1=1661 n_q2=803 n_q3=1615 n_q4=776 worst_quadrant_to_overall_ratio=1.163
The image catalog is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits -region wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.qSKIj6RHT3 (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits' -> 'wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
WCS_IMAGE_NAME=wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
WCS-calibrated image found: wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
Checking if the catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat corresponding to the image wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits alredy exist and is non-empty...
Catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat corresponding to the image wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
WCS catalog name: wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=724, bad_region=1811, passed=9037
Got 9037 stars (including 6618 good ones) from the SExtractor catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat
util/solve_plate_with_UCAC5 got 9037 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.7'
Seting catalog search parameters based on the expected field of view 941.7 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013079 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010463 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 531 to 588 (Dec 16.3 to 27.4)
Done reading UCAC5 zone files...
Matched 4867 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4861 matched stars entering correct_measured_positions(), 4861 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4861 matched stars entering correct_measured_positions(), 7603 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 531 to 588 (Dec 16.3 to 27.4)
Done reading UCAC5 zone files...
Matched 4867 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4861 matched stars entering correct_measured_positions(), 7603 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Accuracy estimation diagnostic: 4861 matched stars entering correct_measured_positions(), 7603 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Excluding outliers - 4861 stars left (next iteration limit 5347)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits N_match=4861 sigma_overall_arcsec=0.420 sigma_q1_arcsec=0.486 sigma_q2_arcsec=0.403 sigma_q3_arcsec=0.381 sigma_q4_arcsec=0.391 n_q1=1662 n_q2=804 n_q3=1615 n_q4=780 worst_quadrant_to_overall_ratio=1.156
The image catalog is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits -region wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.oHyZAZknd0 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
WCS-calibrated image found: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
Checking if the catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat corresponding to the image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat corresponding to the image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
WCS catalog name: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=253, bad_region=495, passed=3336
Got 3336 stars (including 2620 good ones) from the SExtractor catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat
util/solve_plate_with_UCAC5 got 3336 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.1'
Seting catalog search parameters based on the expected field of view 941.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013071 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010457 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 2538 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2537 matched stars entering correct_measured_positions(), 2537 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2537 matched stars entering correct_measured_positions(), 2915 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 2538 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 2535 matched stars entering correct_measured_positions(), 2915 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
Accuracy estimation diagnostic: 2535 matched stars entering correct_measured_positions(), 2915 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
Excluding outliers - 2535 stars left (next iteration limit 2790)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=2535 robust_rms=5.679 arcsec worst_quadrant_rms=14.346 arcsec
SIP_REFIT: SIP order 3 trial: matched=2535 robust_rms=0.669 arcsec worst_quadrant_rms=0.697 arcsec
SIP_REFIT: SIP order 5 trial: matched=2535 robust_rms=0.536 arcsec worst_quadrant_rms=0.576 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=2535 robust_rms_before=1.645 arcsec robust_rms_before_corrected=0.498 arcsec robust_rms_after=0.536 arcsec worst_quadrant_rms_before=0.559 worst_quadrant_rms_after=0.576
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.559 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits N_match=2535 sigma_overall_arcsec=0.508 sigma_q1_arcsec=0.477 sigma_q2_arcsec=0.575 sigma_q3_arcsec=0.532 sigma_q4_arcsec=0.516 n_q1=897 n_q2=337 n_q3=921 n_q4=380 worst_quadrant_to_overall_ratio=1.132
The image catalog is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits -region wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.3ajZ8JQPk0 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
WCS-calibrated image found: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Checking if the catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat corresponding to the image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat corresponding to the image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
WCS catalog name: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=12, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=258, bad_region=505, passed=3370
Got 3370 stars (including 2652 good ones) from the SExtractor catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat
util/solve_plate_with_UCAC5 got 3370 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.0'
Seting catalog search parameters based on the expected field of view 941.0 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013069 (47.0 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010456 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.6 to 27.4)
Done reading UCAC5 zone files...
Matched 2571 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2569 matched stars entering correct_measured_positions(), 2569 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2569 matched stars entering correct_measured_positions(), 2953 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.6 to 27.4)
Done reading UCAC5 zone files...
Matched 2571 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 2568 matched stars entering correct_measured_positions(), 2953 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
Accuracy estimation diagnostic: 2568 matched stars entering correct_measured_positions(), 2953 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
Excluding outliers - 2568 stars left (next iteration limit 2825)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=2568 robust_rms=5.325 arcsec worst_quadrant_rms=17.223 arcsec
SIP_REFIT: SIP order 3 trial: matched=2568 robust_rms=0.631 arcsec worst_quadrant_rms=0.677 arcsec
SIP_REFIT: SIP order 5 trial: matched=2568 robust_rms=0.526 arcsec worst_quadrant_rms=0.585 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=2568 robust_rms_before=1.584 arcsec robust_rms_before_corrected=0.492 arcsec robust_rms_after=0.526 arcsec worst_quadrant_rms_before=0.565 worst_quadrant_rms_after=0.585
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.565 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits N_match=2568 sigma_overall_arcsec=0.513 sigma_q1_arcsec=0.469 sigma_q2_arcsec=0.568 sigma_q3_arcsec=0.499 sigma_q4_arcsec=0.522 n_q1=917 n_q2=349 n_q3=930 n_q4=372 worst_quadrant_to_overall_ratio=1.108
The image catalog is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits -region wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
Saving the final (post-refit) wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits to local_wcs_cache/
'wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits' -> 'local_wcs_cache/wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits'
Saving the final (post-refit) wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits to local_wcs_cache/
'wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits' -> 'local_wcs_cache/wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits'
Saving the final (post-refit) wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits to local_wcs_cache/
'wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits' -> 'local_wcs_cache/wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits'
Saving the final (post-refit) wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits to local_wcs_cache/
'wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits' -> 'local_wcs_cache/wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits'
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits sigma_overall=0.395 worst_q_ratio=1.163
ref2=Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits sigma_overall=0.420 worst_q_ratio=1.156
new1=fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits sigma_overall=0.508 worst_q_ratio=1.132
new2=fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits sigma_overall=0.513 worst_q_ratio=1.108
reference average sigma_overall=0.4075 worst_q_ratio=1.1595
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199_astrometric_residuals.png (4855 matched stars from wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.35 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200_astrometric_residuals.png (4861 matched stars from wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.37 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387_astrometric_residuals.png (2535 matched stars from wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.45 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388_astrometric_residuals.png (2568 matched stars from wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.45 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits'
Saving fully-calibrated image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits'
Preparing the HTML report for the field Cnc-03-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
make_report_in_HTML.sh Phase 1 (network queries): 0s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 0s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 06162_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 06162_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:02:40.10 +23:54:56.5 in the exclusion list exclusion_list.txt ****
make_report_in_HTML.sh Phase 2 (HTML assembly): 0s
make_report_in_HTML.sh TOTAL: 0s
Prepared the HTML report for the field Cnc-03-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
SExtractor catalog cache: saved Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.cat to cache
SExtractor catalog cache: saved Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Creating symlink local_wcs_cache/wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
Creating symlink local_wcs_cache/wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
Creating symlink local_wcs_cache/wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits exists and is non-empty
wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits exists and is non-empty
wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits exists and is non-empty
wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits (1st reference image)
verification OK: wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Image size: 941.7'x627.1' 15.7(deg)x10.5(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 09:13:50.704 +21:59:59.79 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits (1st new image)
verification OK: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
Image size: 941.1'x624.5' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 09:13:38.855 +22:03:36.73 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 09:13:50.704 +21:59:59.79
Second-epoch image center 09:13:38.855 +22:03:36.73
Angular distance between the image centers 0.0757 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits (2nd new image)
verification OK: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Image size: 941.0'x624.5' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 09:13:36.530 +22:04:16.58 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 09:13:50.704 +21:59:59.79
Second-epoch image center 09:13:36.530 +22:04:16.58
Angular distance between the image centers 0.0899 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 09:13:38.855 +22:03:36.73
Second-epoch second image center 09:13:36.530 +22:04:16.58
Angular distance between the image centers 0.01425 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits &> /tmp/tmp.qAlxPKmWvB
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits &> /tmp/tmp.Z4nDsH8mTm
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits &> /tmp/tmp.Pq7I3Cni7V
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits &> /tmp/tmp.auCrUZS03S
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Calibrating the magnitude scale
Found non-empty wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits and wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits and wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
Found non-empty wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits and wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
The reference image (wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits) and catalog (wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat) found
'wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat' -> 'wcsmag.cat'
Read 50507 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 129.4936 to 147.0734 deg, Dec +16.3325 to +27.3500 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 129.4936 to 147.0734 deg, Dec 16.3325 to 27.3500 deg
Loaded 6016 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4201 out of 4841 total matches.
Matched with Tycho-2 4841 out of 50507 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.803900
a=0.000000 b=1.000000 c=22.803900
From vast_summary.log: estimated ref. image limiting mag.: -7.24
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.56
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.56
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 50507 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 129.4936 to 147.0734 deg, Dec +16.3325 to +27.3500 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 129.4936 to 147.0734 deg, Dec 16.3325 to 27.3500 deg
Loaded 6016 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4201 out of 4841 total matches.
Matched with Tycho-2 4841 out of 50507 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Forced-photometry filter: calibrated wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits -> calib.txt_param_ref_wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits (aperture=4.9)
Read 50709 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 129.4911 to 147.0623 deg, Dec +16.3281 to +27.3564 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 129.4911 to 147.0623 deg, Dec 16.3281 to 27.3564 deg
Loaded 6019 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4178 out of 4842 total matches.
Matched with Tycho-2 4842 out of 50709 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
Forced-photometry filter: calibrated wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits -> calib.txt_param_ref_wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits (aperture=4.9)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 23 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.0 pix Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
2.0 pix Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
2.1 pix fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
2.1 pix fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Limiting magnitude estimates:
15.6 mag. Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
15.6 mag. Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
14.1 mag. fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
14.1 mag. fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
All-image limiting magnitude estimate: 14.1 (SNR ) 13.6 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.qAlxPKmWvB (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits' -> 'wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
WCS_IMAGE_NAME=wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
WCS-calibrated image found: wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
Checking if the catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat corresponding to the image wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits alredy exist and is non-empty...
Catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat corresponding to the image wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits
WCS catalog name: wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=20, blended=2848, bad_region=8306, passed=50487
Got 50487 stars (including 39677 good ones) from the SExtractor catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat
util/solve_plate_with_UCAC5 got 50487 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.7'
Seting catalog search parameters based on the expected field of view 941.7 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013079 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010463 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 531 to 588 (Dec 16.3 to 27.4)
Done reading UCAC5 zone files...
Matched 4864 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4859 matched stars entering correct_measured_positions(), 4859 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4859 matched stars entering correct_measured_positions(), 43981 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 531 to 588 (Dec 16.3 to 27.4)
Done reading UCAC5 zone files...
Matched 4864 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4859 matched stars entering correct_measured_positions(), 43981 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Accuracy estimation diagnostic: 4859 matched stars entering correct_measured_positions(), 43981 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Excluding outliers - 4859 stars left (next iteration limit 5344)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits N_match=4859 sigma_overall_arcsec=0.373 sigma_q1_arcsec=0.434 sigma_q2_arcsec=0.351 sigma_q3_arcsec=0.343 sigma_q4_arcsec=0.341 n_q1=1682 n_q2=789 n_q3=1601 n_q4=787 worst_quadrant_to_overall_ratio=1.165
The image catalog is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits -region wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.Z4nDsH8mTm (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits' -> 'wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
WCS_IMAGE_NAME=wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
WCS-calibrated image found: wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
Checking if the catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat corresponding to the image wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits alredy exist and is non-empty...
Catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat corresponding to the image wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits
WCS catalog name: wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=29, blended=2904, bad_region=8331, passed=50680
Got 50680 stars (including 39792 good ones) from the SExtractor catalog wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat
util/solve_plate_with_UCAC5 got 50680 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.7'
Seting catalog search parameters based on the expected field of view 941.7 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013079 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010463 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 531 to 588 (Dec 16.3 to 27.4)
Done reading UCAC5 zone files...
Matched 4865 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4863 matched stars entering correct_measured_positions(), 4863 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4863 matched stars entering correct_measured_positions(), 44143 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 531 to 588 (Dec 16.3 to 27.4)
Done reading UCAC5 zone files...
Matched 4865 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4862 matched stars entering correct_measured_positions(), 44143 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Accuracy estimation diagnostic: 4862 matched stars entering correct_measured_positions(), 44143 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Excluding outliers - 4862 stars left (next iteration limit 5349)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits N_match=4862 sigma_overall_arcsec=0.393 sigma_q1_arcsec=0.449 sigma_q2_arcsec=0.385 sigma_q3_arcsec=0.359 sigma_q4_arcsec=0.365 n_q1=1678 n_q2=784 n_q3=1613 n_q4=787 worst_quadrant_to_overall_ratio=1.143
The image catalog is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits -region wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.Pq7I3Cni7V (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
WCS-calibrated image found: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
Checking if the catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat corresponding to the image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat corresponding to the image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
WCS catalog name: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=6, blended=708, bad_region=2527, passed=21462
Got 21462 stars (including 18300 good ones) from the SExtractor catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat
util/solve_plate_with_UCAC5 got 21462 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.1'
Seting catalog search parameters based on the expected field of view 941.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013071 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010457 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 4842 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4837 matched stars entering correct_measured_positions(), 4837 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4837 matched stars entering correct_measured_positions(), 19553 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 4841 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4835 matched stars entering correct_measured_positions(), 19553 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
Accuracy estimation diagnostic: 4835 matched stars entering correct_measured_positions(), 19553 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
Excluding outliers - 4835 stars left (next iteration limit 5320)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: SIP order 2 trial: matched=4835 robust_rms=5.632 arcsec worst_quadrant_rms=13.255 arcsec
SIP_REFIT: SIP order 3 trial: matched=4835 robust_rms=0.679 arcsec worst_quadrant_rms=0.719 arcsec
SIP_REFIT: SIP order 5 trial: matched=4835 robust_rms=0.556 arcsec worst_quadrant_rms=0.593 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4835 robust_rms_before=1.654 arcsec robust_rms_before_corrected=0.505 arcsec robust_rms_after=0.556 arcsec worst_quadrant_rms_before=0.538 worst_quadrant_rms_after=0.593
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.538 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits N_match=4835 sigma_overall_arcsec=0.521 sigma_q1_arcsec=0.493 sigma_q2_arcsec=0.562 sigma_q3_arcsec=0.553 sigma_q4_arcsec=0.458 n_q1=1781 n_q2=691 n_q3=1637 n_q4=726 worst_quadrant_to_overall_ratio=1.080
The image catalog is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits -region wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.auCrUZS03S (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
WCS-calibrated image found: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Checking if the catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat corresponding to the image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat corresponding to the image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
WCS catalog name: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=2, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=7, blended=683, bad_region=2481, passed=21480
Got 21480 stars (including 18371 good ones) from the SExtractor catalog wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat
util/solve_plate_with_UCAC5 got 21480 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.0'
Seting catalog search parameters based on the expected field of view 941.0 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013069 (47.0 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010456 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.4)
Done reading UCAC5 zone files...
Matched 4841 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4834 matched stars entering correct_measured_positions(), 4834 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4834 matched stars entering correct_measured_positions(), 19587 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.4)
Done reading UCAC5 zone files...
Matched 4841 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4834 matched stars entering correct_measured_positions(), 19587 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
Accuracy estimation diagnostic: 4834 matched stars entering correct_measured_positions(), 19587 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
Excluding outliers - 4834 stars left (next iteration limit 5317)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: SIP order 2 trial: matched=4834 robust_rms=5.442 arcsec worst_quadrant_rms=13.863 arcsec
SIP_REFIT: SIP order 3 trial: matched=4834 robust_rms=0.655 arcsec worst_quadrant_rms=0.700 arcsec
SIP_REFIT: SIP order 5 trial: matched=4834 robust_rms=0.546 arcsec worst_quadrant_rms=0.598 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4834 robust_rms_before=1.581 arcsec robust_rms_before_corrected=0.493 arcsec robust_rms_after=0.546 arcsec worst_quadrant_rms_before=0.543 worst_quadrant_rms_after=0.598
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.543 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits N_match=4834 sigma_overall_arcsec=0.511 sigma_q1_arcsec=0.476 sigma_q2_arcsec=0.574 sigma_q3_arcsec=0.528 sigma_q4_arcsec=0.485 n_q1=1787 n_q2=684 n_q3=1644 n_q4=719 worst_quadrant_to_overall_ratio=1.124
The image catalog is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits -region wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-03-40_20.00sec_-0.00C_LIGHT_0387.fits
Saving fully-calibrated image wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-09-09_CI_Cnc-03-Q2b1x1_064259_TTUQ2b1x1_2041274_qBw3CjjY/wcs_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388.fits
Preparing the HTML report for the field Cnc-03-Q2b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:09:27.12 +23:41:21.3: 16.21 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 08:46:55.53 +17:40:18.8: 13.26 +/- 0.03 detection
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:17:11.29 +20:39:20.6: 16.26 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:09:13.19 +22:04:10.8: 12.89 +/- 0.02 detection
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:09:47.18 +25:13:35.5: 12.88 +/- 0.03 detection
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:02:32.13 +20:34:13.3: 16.18 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 08:49:21.75 +17:58:14.8: 13.73 +/- 0.05 detection
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:01:47.19 +23:56:40.4: 16.18 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 08:46:55.53 +17:40:18.8: 13.29 +/- 0.03 detection
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:09:47.18 +25:13:35.5: 12.92 +/- 0.02 detection
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:09:13.19 +22:04:10.8: 12.90 +/- 0.02 detection
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 09:00:02.44 +19:15:52.4: 16.12 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:17:11.29 +20:39:20.6: 16.28 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:09:27.12 +23:41:21.3: 16.21 +/- 99.00 upperlimit
Forced photometry reference-image weighted average: 13.28 +/- 0.02
Forced photometry reference-image weighted average: 12.90 +/- 0.02
Forced photometry filter REJECTED candidate at 08:46:55.53 +17:40:18.8: ref_mag=13.28 +/- 0.02 new_mean_mag=13.4260 delta=-0.15 (need > 0.90)
Forced photometry reference-image weighted average: 12.89 +/- 0.01
Forced photometry filter REJECTED candidate at 09:09:47.18 +25:13:35.5: ref_mag=12.90 +/- 0.02 new_mean_mag=13.2257 delta=-0.32 (need > 0.90)
Forced photometry filter REJECTED candidate at 09:09:13.19 +22:04:10.8: ref_mag=12.89 +/- 0.01 new_mean_mag=12.8204 delta=0.07 (need > 0.90)
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:02:32.13 +20:34:13.3: 16.22 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 08:49:21.75 +17:58:14.8: 13.74 +/- 0.05 detection
Forced photometry reference-image weighted average: 13.73 +/- 0.04
Forced photometry filter REJECTED candidate at 08:49:21.75 +17:58:14.8: ref_mag=13.73 +/- 0.04 new_mean_mag=13.6331 delta=0.10 (need > 0.90)
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:01:47.19 +23:56:40.4: 16.22 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 09:00:02.44 +19:15:52.4: 16.13 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-12-25_20.00sec_-15.00C_LIGHT_0199.fits at 08:58:51.76 +23:32:55.2: 16.17 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-03-Q2b1x1_2026-02-21_23-13-17_20.00sec_-15.00C_LIGHT_0200.fits at 08:58:51.76 +23:32:55.2: 16.15 +/- 99.00 upperlimit
Adding exclusion_list_local.txt__out61635.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out63691.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out63788.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out63798.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out63817.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out63840.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 6s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 3s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63596_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63596_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:10:18.88 +20:32:41.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63597_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63597_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63684_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63684_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:09:53.99 +25:12:42.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63691_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
Preparing report for the candidate 63691_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63700_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63700_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:05:00.96 +22:48:39.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63715_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63715_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63753_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63753_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:04:57.32 +24:36:55.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63766_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63766_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:00:28.81 +22:43:57.8 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63782_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63782_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63788_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
Preparing report for the candidate 63788_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63789_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63789_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:04:51.13 +24:37:34.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63798_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
Preparing report for the candidate 63798_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63800_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63800_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:16:16.53 +23:25:03.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63801_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63801_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63803_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63803_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:20:35.06 +22:39:17.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63816_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63816_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:09:50.49 +18:49:46.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63817_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
Preparing report for the candidate 63817_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63840_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
Preparing report for the candidate 63840_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 63858_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 63858_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:13:43.86 +21:02:53.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 13343_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 13343_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:13:31.88 +19:34:22.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 06054_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 06054_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
**** FOUND 09:01:03.24 +17:53:55.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 61635_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
Preparing report for the candidate 61635_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 47832_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388
The candidate 47832_fd_Cnc-03-Q2b1x1_2026-09-09_06-04-32_20.00sec_-0.00C_LIGHT_0388 did not pass the final checks
