This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 08 09.1888 2461261.6888 9.69 21:48:39.72 -26:24:10.7
23.15196 -49.42638 galactic PsA Second-epoch detections are separated by 0.3" and 4.3 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.349 Dembowska 1 -0 1 9.8 -0 -0
Forced photometry on wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits at 21:48:39.72 -26:24:10.7: 14.95 +/- 99.00 upperlimit
Forced photometry on wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits at 21:48:39.72 -26:24:10.7: 14.58 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461261.6888,9.69,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260809.1888 9.69CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 09.1888 2461261.6888 10.32 21:38:41.93 -27:12:34.1
21.28976 -47.41001 galactic PsA Second-epoch detections are separated by 0.5" and 4.4 pix
The object was found in VSX 1" RV PsA
Type: M
# Max. Min./Amp. JD0 Period
10.500 pg < 13.000 pg 2425540.00000 361.000000000000
The object was not found in astcheck.
Forced photometry on wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits at 21:38:41.93 -27:12:34.1: 11.37 +/- 0.01 detection
Forced photometry on wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits at 21:38:41.93 -27:12:34.1: 11.20 +/- 0.02 detection
Forced photometry reference-image weighted average: 11.30 +/- 0.01
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
RV PsA,2461261.6888,10.32,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
RV PsA 20260809.1888 10.32CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 09.1888 2461261.6888 11.64 22:22:56.48 -28:08:55.0
22.36305 -57.22476 galactic PsA Second-epoch detections are separated by 0.4" and 4.1 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.264 Libussa 1 0 1 12.0 -0 -0
Forced photometry on wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits at 22:22:56.48 -28:08:55.0: 14.94 +/- 99.00 upperlimit
Forced photometry on wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits at 22:22:56.48 -28:08:55.0: 14.71 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461261.6888,11.64,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260809.1888 11.64CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
ASASSN-V J215926.21-274210.5,2461261.6888,11.00,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
ASASSN-V J215926.21-274210.5 20260809.1888 11.00CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461208.89590666 17.06.2026 09:29:56.335 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
First image: 2461208.89590666 17.06.2026 09:29:56.335 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Last image: 2461261.68907328 09.08.2026 04:32:05.931 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 3
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -8.23
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 2 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 3400
Objects passed selection criteria: 3393
Measurements per detected object (mean, median, min, max): 2.7 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.7 2.0 2 4
Average stars detected per image: 2606
Average stars matched: 2590.25 (99.3956 %)
Memory usage VmPeak: 230624 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Aug 6 15:05:04 CDT 2026
VaST build number 1.0rc89-190-gdf2934b0
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-08-06)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Sat Aug 8 23:38:23 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461208.89590666 17.06.2026 09:29:56.335 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
First image: 2461208.89590666 17.06.2026 09:29:56.335 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Last image: 2461261.68907328 09.08.2026 04:32:05.931 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 18
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.95
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 9 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 21524
Objects passed selection criteria: 21473
Measurements per detected object (mean, median, min, max): 2.8 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.8 2.0 2 4
Average stars detected per image: 16566
Average stars matched: 16237.5 (98.017 %)
Memory usage VmPeak: 247648 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Aug 6 15:05:04 CDT 2026
VaST build number 1.0rc89-190-gdf2934b0
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-08-06)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Sat Aug 8 23:39:20 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ1b1x1/TTUQ1_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
SExtractor catalog cache: saved PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.cat to cache
SExtractor catalog cache: saved PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461261.68857113
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits exists and is non-empty
Saving wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits to local_wcs_cache/
'wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits' -> 'local_wcs_cache/wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits'
wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits exists and is non-empty
Saving wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits to local_wcs_cache/
'wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits' -> 'local_wcs_cache/wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits'
wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits exists and is non-empty
Saving wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits to local_wcs_cache/
'wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits' -> 'local_wcs_cache/wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits'
wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits exists and is non-empty
Saving wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits to local_wcs_cache/
'wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits' -> 'local_wcs_cache/wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits'
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits (1st reference image)
verification OK: wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Image size: 937.5'x624.7' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 22:04:47.411 -25:59:56.10 J2000 4789.000 3195.000
###################################
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits (1st new image)
verification OK: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
Image size: 943.5'x627.2' 15.7(deg)x10.5(deg) 9576x6388 pix
Image scale: 5.91"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 22:04:46.324 -26:01:01.49 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 22:04:47.411 -25:59:56.10
Second-epoch image center 22:04:46.324 -26:01:01.49
Angular distance between the image centers 0.0186 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits (2nd new image)
verification OK: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Image size: 943.4'x627.2' 15.7(deg)x10.5(deg) 9576x6388 pix
Image scale: 5.91"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 22:04:47.664 -26:01:20.02 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 22:04:47.411 -25:59:56.10
Second-epoch image center 22:04:47.664 -26:01:20.02
Angular distance between the image centers 0.0233 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 22:04:46.324 -26:01:01.49
Second-epoch second image center 22:04:47.664 -26:01:20.02
Angular distance between the image centers 0.00719 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits &> /tmp/tmp.JnzSumUaGI
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits &> /tmp/tmp.aFMCxbwwfC
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits &> /tmp/tmp.4qqtmYRwyK
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits &> /tmp/tmp.UhNHzH0gEO
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Calibrating the magnitude scale
Found non-empty wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits and wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits and wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
Found non-empty wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits and wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
The reference image (wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits) and catalog (wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat) found
'wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat' -> 'wcsmag.cat'
Read 4440 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 322.1722 to 340.3087 deg, Dec -31.2446 to -20.5454 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 322.1722 to 340.3087 deg, Dec -31.2446 to -20.5454 deg
Loaded 5846 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3600 out of 3656 total matches.
Matched with Tycho-2 3656 out of 4440 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.554850
a=0.000000 b=1.000000 c=22.554850
From vast_summary.log: estimated ref. image limiting mag.: -8.23
Updating vast_summary.log: Estimated ref. image limiting mag.: 14.32
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 14.32
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 4440 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 322.1722 to 340.3087 deg, Dec -31.2446 to -20.5454 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 322.1722 to 340.3087 deg, Dec -31.2446 to -20.5454 deg
Loaded 5846 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3600 out of 3656 total matches.
Matched with Tycho-2 3656 out of 4440 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Forced-photometry filter: calibrated wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits -> calib.txt_param_ref_wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits (aperture=6.4)
Read 3379 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 322.1720 to 340.3078 deg, Dec -31.2657 to -20.5595 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 322.1720 to 340.3078 deg, Dec -31.2657 to -20.5595 deg
Loaded 5845 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 2853 out of 2883 total matches.
Matched with Tycho-2 2883 out of 3379 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
Forced-photometry filter: calibrated wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits -> calib.txt_param_ref_wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits (aperture=6.6)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 3 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.3 pix PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
2.4 pix PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
2.7 pix fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
2.7 pix fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Limiting magnitude estimates:
14.3 mag. PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
14.0 mag. PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
12.5 mag. fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
12.5 mag. fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
All-image limiting magnitude estimate: 12.5 (SNR ) 10.1 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.JnzSumUaGI (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits' -> 'wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
WCS_IMAGE_NAME=wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
WCS-calibrated image found: wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Checking if the catalog wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat corresponding to the image wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits alredy exist and is non-empty...
Catalog wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat corresponding to the image wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
WCS catalog name: wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=250, bad_region=0, passed=4440
Got 4440 stars (including 4189 good ones) from the SExtractor catalog wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
util/solve_plate_with_UCAC5 got 4440 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.5'
Seting catalog search parameters based on the expected field of view 937.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013021 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010417 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 293 to 349 (Dec -31.2 to -20.5)
Done reading UCAC5 zone files...
Matched 3830 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3814 matched stars entering correct_measured_positions(), 3814 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3813 matched stars entering correct_measured_positions(), 4440 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.34"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 293 to 349 (Dec -31.2 to -20.5)
Done reading UCAC5 zone files...
Matched 3832 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 3815 matched stars entering correct_measured_positions(), 4440 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Accuracy estimation diagnostic: 3815 matched stars entering correct_measured_positions(), 4440 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Excluding outliers - 3815 stars left (next iteration limit 4194)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits N_match=3815 sigma_overall_arcsec=0.399 sigma_q1_arcsec=0.336 sigma_q2_arcsec=0.491 sigma_q3_arcsec=0.379 sigma_q4_arcsec=0.425 n_q1=982 n_q2=950 n_q3=998 n_q4=885 worst_quadrant_to_overall_ratio=1.232
The image catalog is written to wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits -region wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.aFMCxbwwfC (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits' -> 'wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
WCS_IMAGE_NAME=wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
WCS-calibrated image found: wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
Checking if the catalog wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat corresponding to the image wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits alredy exist and is non-empty...
Catalog wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat corresponding to the image wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
WCS catalog name: wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=225, bad_region=1, passed=3379
Got 3379 stars (including 3151 good ones) from the SExtractor catalog wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat
util/solve_plate_with_UCAC5 got 3379 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.8'
Seting catalog search parameters based on the expected field of view 937.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013025 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010420 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 293 to 349 (Dec -31.3 to -20.6)
Done reading UCAC5 zone files...
Matched 2898 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2886 matched stars entering correct_measured_positions(), 2886 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.41"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 2886 matched stars entering correct_measured_positions(), 3379 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.41"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 293 to 349 (Dec -31.3 to -20.6)
Done reading UCAC5 zone files...
Matched 2896 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 2883 matched stars entering correct_measured_positions(), 3379 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.44"
Accuracy estimation diagnostic: 2883 matched stars entering correct_measured_positions(), 3379 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.44"
Excluding outliers - 2883 stars left (next iteration limit 3174)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits N_match=2883 sigma_overall_arcsec=0.473 sigma_q1_arcsec=0.412 sigma_q2_arcsec=0.532 sigma_q3_arcsec=0.493 sigma_q4_arcsec=0.468 n_q1=772 n_q2=681 n_q3=800 n_q4=630 worst_quadrant_to_overall_ratio=1.126
The image catalog is written to wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits -region wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.4qqtmYRwyK (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
WCS_IMAGE_NAME=wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
WCS-calibrated image found: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
Checking if the catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat corresponding to the image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits alredy exist and is non-empty...
Catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat corresponding to the image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
WCS catalog name: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=100, bad_region=0, passed=1335
Got 1335 stars (including 1235 good ones) from the SExtractor catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat
util/solve_plate_with_UCAC5 got 1335 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 943.5'
Seting catalog search parameters based on the expected field of view 943.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013104 (47.2 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010483 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 292 to 351 (Dec -31.5 to -20.2)
Done reading UCAC5 zone files...
Matched 1136 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1129 matched stars entering correct_measured_positions(), 1121 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.51"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1129 matched stars entering correct_measured_positions(), 1326 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.50"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 292 to 351 (Dec -31.5 to -20.2)
Done reading UCAC5 zone files...
Matched 1136 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 1129 matched stars entering correct_measured_positions(), 1326 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
Accuracy estimation diagnostic: 1129 matched stars entering correct_measured_positions(), 1326 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
Excluding outliers - 1129 stars left (next iteration limit 1241)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=1129 robust_rms=8.482 arcsec worst_quadrant_rms=17.578 arcsec
SIP_REFIT: SIP order 3 trial: matched=1129 robust_rms=0.676 arcsec worst_quadrant_rms=1.517 arcsec
SIP_REFIT: SIP order 5 trial: matched=1129 robust_rms=0.498 arcsec worst_quadrant_rms=0.703 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=1129 robust_rms_before=1.522 arcsec robust_rms_before_corrected=0.502 arcsec robust_rms_after=0.498 arcsec worst_quadrant_rms_before=0.762 worst_quadrant_rms_after=0.703
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.762 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits N_match=1129 sigma_overall_arcsec=0.475 sigma_q1_arcsec=0.490 sigma_q2_arcsec=0.772 sigma_q3_arcsec=0.362 sigma_q4_arcsec=0.489 n_q1=338 n_q2=194 n_q3=363 n_q4=234 worst_quadrant_to_overall_ratio=1.625
The image catalog is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits -region wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.UhNHzH0gEO (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
WCS_IMAGE_NAME=wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
WCS-calibrated image found: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Checking if the catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat corresponding to the image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits alredy exist and is non-empty...
Catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat corresponding to the image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
WCS catalog name: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=100, bad_region=0, passed=1331
Got 1331 stars (including 1231 good ones) from the SExtractor catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat
util/solve_plate_with_UCAC5 got 1331 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 943.4'
Seting catalog search parameters based on the expected field of view 943.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013103 (47.2 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010482 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 292 to 351 (Dec -31.5 to -20.2)
Done reading UCAC5 zone files...
Matched 1133 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1124 matched stars entering correct_measured_positions(), 1118 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1124 matched stars entering correct_measured_positions(), 1324 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 292 to 351 (Dec -31.5 to -20.2)
Done reading UCAC5 zone files...
Matched 1133 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 1125 matched stars entering correct_measured_positions(), 1322 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.45"
Accuracy estimation diagnostic: 1125 matched stars entering correct_measured_positions(), 1322 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.44"
Excluding outliers - 1125 stars left (next iteration limit 1236)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=1125 robust_rms=8.498 arcsec worst_quadrant_rms=15.953 arcsec
SIP_REFIT: SIP order 3 trial: matched=1125 robust_rms=0.680 arcsec worst_quadrant_rms=1.094 arcsec
SIP_REFIT: SIP order 5 trial: matched=1125 robust_rms=0.502 arcsec worst_quadrant_rms=0.665 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=1125 robust_rms_before=1.413 arcsec robust_rms_before_corrected=0.480 arcsec robust_rms_after=0.502 arcsec worst_quadrant_rms_before=0.703 worst_quadrant_rms_after=0.665
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.703 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits N_match=1125 sigma_overall_arcsec=0.476 sigma_q1_arcsec=0.491 sigma_q2_arcsec=0.698 sigma_q3_arcsec=0.373 sigma_q4_arcsec=0.543 n_q1=333 n_q2=199 n_q3=361 n_q4=232 worst_quadrant_to_overall_ratio=1.466
The image catalog is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits -region wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits sigma_overall=0.399 worst_q_ratio=1.232
ref2=PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits sigma_overall=0.473 worst_q_ratio=1.126
new1=fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits sigma_overall=0.475 worst_q_ratio=1.625
new2=fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits sigma_overall=0.476 worst_q_ratio=1.466
reference average sigma_overall=0.436 worst_q_ratio=1.179
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433_astrometric_residuals.png (3815 matched stars from wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.36 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273_astrometric_residuals.png (2883 matched stars from wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.42 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126_astrometric_residuals.png (1129 matched stars from wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.42 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127_astrometric_residuals.png (1125 matched stars from wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.43 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits'
Saving fully-calibrated image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits'
Preparing the HTML report for the field PsA-01-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
Forced photometry on wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits at 21:38:41.93 -27:12:34.1: 11.37 +/- 0.01 detection
Forced photometry on wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits at 21:48:39.72 -26:24:10.7: 14.95 +/- 99.00 upperlimit
Forced photometry on wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits at 21:38:41.93 -27:12:34.1: 11.20 +/- 0.02 detection
Forced photometry on wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits at 21:48:39.72 -26:24:10.7: 14.58 +/- 99.00 upperlimit
Forced photometry reference-image weighted average: 11.30 +/- 0.01
Forced photometry filter KEPT candidate at 21:38:41.93 -27:12:34.1: ref_mag=11.30 +/- 0.01 new_mean_mag=10.3227 delta=0.98 (need > 0.90)
Adding exclusion_list_local.txt__out01668.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out20040.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 5s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 2s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20040_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
Preparing report for the candidate 20040_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 01688_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 01688_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
**** FOUND 22:13:09.92 -27:16:10.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 01668_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
Preparing report for the candidate 01668_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
make_report_in_HTML.sh Phase 2 (HTML assembly): 0s
make_report_in_HTML.sh TOTAL: 7s
Prepared the HTML report for the field PsA-01-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
21:38:41.93 -27:12:34.1
21:48:39.72 -26:24:10.7
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
SExtractor catalog cache: saved PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.cat to cache
SExtractor catalog cache: saved PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Creating symlink local_wcs_cache/wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
Creating symlink local_wcs_cache/wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
Creating symlink local_wcs_cache/wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Creating symlink local_wcs_cache/exclusion_list.txt
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits exists and is non-empty
wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits exists and is non-empty
wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits exists and is non-empty
wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits (1st reference image)
verification OK: wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Image size: 937.5'x624.7' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 22:04:47.411 -25:59:56.10 J2000 4789.000 3195.000
###################################
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits (1st new image)
verification OK: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
Image size: 943.5'x627.2' 15.7(deg)x10.5(deg) 9576x6388 pix
Image scale: 5.91"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 22:04:46.324 -26:01:01.49 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 22:04:47.411 -25:59:56.10
Second-epoch image center 22:04:46.324 -26:01:01.49
Angular distance between the image centers 0.0186 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits (2nd new image)
verification OK: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Image size: 943.4'x627.2' 15.7(deg)x10.5(deg) 9576x6388 pix
Image scale: 5.91"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 22:04:47.664 -26:01:20.02 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 22:04:47.411 -25:59:56.10
Second-epoch image center 22:04:47.664 -26:01:20.02
Angular distance between the image centers 0.0233 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 22:04:46.324 -26:01:01.49
Second-epoch second image center 22:04:47.664 -26:01:20.02
Angular distance between the image centers 0.00719 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits &> /tmp/tmp.jFDNtQ1oEH
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits &> /tmp/tmp.frdPB3SUyx
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits &> /tmp/tmp.6VdiO3LmPX
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits &> /tmp/tmp.ppcpPLILLA
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Calibrating the magnitude scale
Found non-empty wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits and wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits and wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
Found non-empty wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits and wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
The reference image (wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits) and catalog (wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat) found
'wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat' -> 'wcsmag.cat'
Read 26526 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 322.1722 to 340.3087 deg, Dec -31.2647 to -20.5303 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 322.1722 to 340.3087 deg, Dec -31.2647 to -20.5303 deg
Loaded 5861 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4739 out of 4949 total matches.
Matched with Tycho-2 4949 out of 26526 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.420400
a=0.000000 b=1.000000 c=22.420400
From vast_summary.log: estimated ref. image limiting mag.: -7.95
Updating vast_summary.log: Estimated ref. image limiting mag.: 14.47
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 14.47
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 26526 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 322.1722 to 340.3087 deg, Dec -31.2647 to -20.5303 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 322.1722 to 340.3087 deg, Dec -31.2647 to -20.5303 deg
Loaded 5861 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4739 out of 4949 total matches.
Matched with Tycho-2 4949 out of 26526 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Forced-photometry filter: calibrated wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits -> calib.txt_param_ref_wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits (aperture=5.0)
Read 22382 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 322.1720 to 340.3078 deg, Dec -31.2689 to -20.5297 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 322.1720 to 340.3078 deg, Dec -31.2689 to -20.5297 deg
Loaded 5867 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4759 out of 4957 total matches.
Matched with Tycho-2 4957 out of 22382 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
Forced-photometry filter: calibrated wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits -> calib.txt_param_ref_wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits (aperture=4.9)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 17 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.2 pix PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
2.1 pix PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
2.5 pix fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
2.5 pix fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Limiting magnitude estimates:
14.5 mag. PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
14.2 mag. PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
12.8 mag. fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
12.8 mag. fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
All-image limiting magnitude estimate: 12.8 (SNR ) 12.4 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.jFDNtQ1oEH (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits' -> 'wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
WCS_IMAGE_NAME=wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
WCS-calibrated image found: wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
Checking if the catalog wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat corresponding to the image wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits alredy exist and is non-empty...
Catalog wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat corresponding to the image wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits
WCS catalog name: wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=7, blended=800, bad_region=0, passed=26519
Got 26519 stars (including 25681 good ones) from the SExtractor catalog wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat
util/solve_plate_with_UCAC5 got 26519 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.5'
Seting catalog search parameters based on the expected field of view 937.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013021 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010417 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 293 to 349 (Dec -31.3 to -20.5)
Done reading UCAC5 zone files...
Matched 4575 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4561 matched stars entering correct_measured_positions(), 4561 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.34"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4560 matched stars entering correct_measured_positions(), 26519 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 293 to 349 (Dec -31.3 to -20.5)
Done reading UCAC5 zone files...
Matched 4576 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4561 matched stars entering correct_measured_positions(), 26519 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Accuracy estimation diagnostic: 4561 matched stars entering correct_measured_positions(), 26519 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Excluding outliers - 4561 stars left (next iteration limit 5016)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits N_match=4561 sigma_overall_arcsec=0.387 sigma_q1_arcsec=0.338 sigma_q2_arcsec=0.458 sigma_q3_arcsec=0.369 sigma_q4_arcsec=0.408 n_q1=1223 n_q2=1068 n_q3=1192 n_q4=1078 worst_quadrant_to_overall_ratio=1.182
The image catalog is written to wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits -region wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.frdPB3SUyx (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits' -> 'wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
WCS_IMAGE_NAME=wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
WCS-calibrated image found: wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
Checking if the catalog wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat corresponding to the image wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits alredy exist and is non-empty...
Catalog wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat corresponding to the image wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits
WCS catalog name: wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=8, blended=674, bad_region=1, passed=22374
Got 22374 stars (including 21659 good ones) from the SExtractor catalog wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat
util/solve_plate_with_UCAC5 got 22374 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.8'
Seting catalog search parameters based on the expected field of view 937.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013025 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010420 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 293 to 349 (Dec -31.3 to -20.5)
Done reading UCAC5 zone files...
Matched 4605 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4589 matched stars entering correct_measured_positions(), 4589 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.41"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4589 matched stars entering correct_measured_positions(), 22374 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.41"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 293 to 349 (Dec -31.3 to -20.5)
Done reading UCAC5 zone files...
Matched 4604 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4588 matched stars entering correct_measured_positions(), 22374 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.41"
Accuracy estimation diagnostic: 4588 matched stars entering correct_measured_positions(), 22374 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.43"
Excluding outliers - 4588 stars left (next iteration limit 5047)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits N_match=4588 sigma_overall_arcsec=0.460 sigma_q1_arcsec=0.431 sigma_q2_arcsec=0.487 sigma_q3_arcsec=0.501 sigma_q4_arcsec=0.443 n_q1=1283 n_q2=1109 n_q3=1135 n_q4=1061 worst_quadrant_to_overall_ratio=1.090
The image catalog is written to wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits -region wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.6VdiO3LmPX (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
WCS_IMAGE_NAME=wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
WCS-calibrated image found: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
Checking if the catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat corresponding to the image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits alredy exist and is non-empty...
Catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat corresponding to the image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
WCS catalog name: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=1, blended=167, bad_region=1, passed=8932
Got 8932 stars (including 8754 good ones) from the SExtractor catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat
util/solve_plate_with_UCAC5 got 8932 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 943.5'
Seting catalog search parameters based on the expected field of view 943.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013104 (47.2 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010483 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 292 to 351 (Dec -31.5 to -20.1)
Done reading UCAC5 zone files...
Matched 4600 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4579 matched stars entering correct_measured_positions(), 4579 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.62"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4579 matched stars entering correct_measured_positions(), 8932 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.60"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 292 to 351 (Dec -31.5 to -20.1)
Done reading UCAC5 zone files...
Matched 4602 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4581 matched stars entering correct_measured_positions(), 8932 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.60"
Accuracy estimation diagnostic: 4581 matched stars entering correct_measured_positions(), 8932 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.61"
Excluding outliers - 4581 stars left (next iteration limit 5036)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits N_match=4581 sigma_overall_arcsec=0.647 sigma_q1_arcsec=0.753 sigma_q2_arcsec=0.885 sigma_q3_arcsec=0.503 sigma_q4_arcsec=0.641 n_q1=1293 n_q2=756 n_q3=1566 n_q4=966 worst_quadrant_to_overall_ratio=1.368
The image catalog is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits -region wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.ppcpPLILLA (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
WCS_IMAGE_NAME=wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
WCS-calibrated image found: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Checking if the catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat corresponding to the image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits alredy exist and is non-empty...
Catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat corresponding to the image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
WCS catalog name: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=168, bad_region=2, passed=8909
Got 8909 stars (including 8731 good ones) from the SExtractor catalog wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat
util/solve_plate_with_UCAC5 got 8909 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 943.4'
Seting catalog search parameters based on the expected field of view 943.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013103 (47.2 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010482 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 292 to 351 (Dec -31.5 to -20.1)
Done reading UCAC5 zone files...
Matched 4597 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4578 matched stars entering correct_measured_positions(), 4578 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.61"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4578 matched stars entering correct_measured_positions(), 8909 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.59"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 292 to 351 (Dec -31.5 to -20.1)
Done reading UCAC5 zone files...
Matched 4597 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4579 matched stars entering correct_measured_positions(), 8909 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.60"
Accuracy estimation diagnostic: 4579 matched stars entering correct_measured_positions(), 8909 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.60"
Excluding outliers - 4579 stars left (next iteration limit 5035)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits N_match=4579 sigma_overall_arcsec=0.637 sigma_q1_arcsec=0.720 sigma_q2_arcsec=0.867 sigma_q3_arcsec=0.493 sigma_q4_arcsec=0.642 n_q1=1291 n_q2=757 n_q3=1553 n_q4=978 worst_quadrant_to_overall_ratio=1.363
The image catalog is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits -region wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-31-22_20.00sec_-0.00C_LIGHTs_0126.fits
Saving fully-calibrated image wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-08-08_CI_PsA-01-Q1b1x1_233422_TTUQ1b1x1_2999059_vplT0RBn/wcs_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127.fits
Preparing the HTML report for the field PsA-01-Q1b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits at 21:34:41.48 -20:37:36.9: 99.00 +/- 99.00 edge
Forced photometry on wcs_PsA-01-Q1b1x1_2026-06-17_04-29-56_20.00sec_4.90C_LIGHT_0433.fits at 22:22:56.48 -28:08:55.0: 14.94 +/- 99.00 upperlimit
Forced photometry on wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits at 21:34:41.48 -20:37:36.9: 99.00 +/- 99.00 edge
Forced photometry filter REJECTED candidate at 21:34:41.48 -20:37:36.9: at least one reference image reported edge (off-image or aperture/annulus past image boundary); cannot perform the forced-photometry cross-check
Forced photometry on wcs_PsA-01-Q1b1x1_2026-07-20_01-53-38_20.00sec_4.90C_LIGHT_0273.fits at 22:22:56.48 -28:08:55.0: 14.71 +/- 99.00 upperlimit
Adding exclusion_list_local.txt__out31186.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 7s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 1s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31003_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31003_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31012_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31012_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
**** FOUND 21:48:39.72 -26:24:10.5 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31023_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31023_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (27.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31031_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31031_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (24.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31043_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31043_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (25.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31060_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31060_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (26.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31075_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31075_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (26.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31081_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31081_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (25.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31117_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31117_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (25.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31148_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31148_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (26.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31186_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
Preparing report for the candidate 31186_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31204_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31204_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (25.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31232_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31232_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (27.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 31263_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 31263_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
Rejecting candidate due to large distance (26.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 03112_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 03112_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks
**** FOUND 22:18:00.11 -29:36:13.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 07784_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
Preparing report for the candidate 07784_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 08770_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127
The candidate 08770_fd_PsA-01-Q1b1x1_2026-08-08_23-32-05_20.00sec_-0.00C_LIGHTs_0127 did not pass the final checks