This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 08 06.4668 2461258.9668 12.68 23:52:55.96 -05:44:43.3
87.25142 -64.48440 galactic Aqr Second-epoch detections are separated by 0.2" and 10.0 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.113 Amalthea -0 0 0 12.5 0 0
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:52:55.96 -05:44:43.3: 15.43 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:52:55.96 -05:44:43.3: 15.47 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461258.9668,12.68,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260806.4668 12.68CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 06.4668 2461258.9668 12.67 00:11:36.46 -10:26:17.3
91.69955 -70.85423 galactic Cet Second-epoch detections are separated by 1.1" and 10.1 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.118 Peitho -1 -1 1 12.8 0 -0
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 00:11:36.46 -10:26:17.3: 15.51 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 00:11:36.46 -10:26:17.3: 15.54 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 08 06.4668* 00 11 36.46 -10 26 17.3 12.7 U Cet 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461258.9668,12.67,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260806.4668 12.67CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 06.4668 2461258.9668 13.42 23:45:29.49 -08:33:38.9
79.83147 -65.75059 galactic Aqr Second-epoch detections are separated by 1.8" and 10.1 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.530 Turandot -0 -0 0 13.3 -0 -0
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:45:29.49 -08:33:38.9: 15.45 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:45:29.49 -08:33:38.9: 15.46 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461258.9668,13.42,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260806.4668 13.42CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 06.4668 2461258.9668 13.78 23:37:12.78 -06:24:34.4
79.17044 -62.79155 galactic Aqr Second-epoch detections are separated by 1.8" and 10.4 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.442 Eichsfeldia -1 -1 2 13.6 -0 -0
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:37:12.78 -06:24:34.4: 15.27 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:37:12.78 -06:24:34.4: 15.31 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461258.9668,13.78,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260806.4668 13.78CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461242.93905227 21.07.2026 10:32:04.116 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
First image: 2461242.93905227 21.07.2026 10:32:04.116 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Last image: 2461258.96706622 06.08.2026 11:12:24.521 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 0
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.87
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 2 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 4158
Objects passed selection criteria: 4151
Measurements per detected object (mean, median, min, max): 2.8 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.8 2.0 2 4
Average stars detected per image: 3065.5
Average stars matched: 2991.75 (97.5942 %)
Memory usage VmPeak: 230860 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Wed Aug 5 15:05:04 CDT 2026
VaST build number 1.0rc89-189-g49d3cdfd
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-08-05)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Thu Aug 6 06:19:04 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461242.93905227 21.07.2026 10:32:04.116 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
First image: 2461242.93905227 21.07.2026 10:32:04.116 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Last image: 2461258.96706622 06.08.2026 11:12:24.521 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 18
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.56
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 7 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 21327
Objects passed selection criteria: 21281
Measurements per detected object (mean, median, min, max): 3.2 4.0 2 4
Measurements per selected object (mean, median, min, max): 3.2 4.0 2 4
Average stars detected per image: 18252
Average stars matched: 17481.2 (95.7772 %)
Memory usage VmPeak: 246204 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Wed Aug 5 15:05:04 CDT 2026
VaST build number 1.0rc89-189-g49d3cdfd
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-08-05)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Thu Aug 6 06:19:41 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ1b1x1/TTUQ1_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
SExtractor catalog cache: saved Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.cat to cache
SExtractor catalog cache: saved Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461258.96650853
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits exists and is non-empty
Saving wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits to local_wcs_cache/
'wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits' -> 'local_wcs_cache/wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits'
wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits exists and is non-empty
Saving wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits to local_wcs_cache/
'wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits' -> 'local_wcs_cache/wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits'
wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits exists and is non-empty
Saving wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits to local_wcs_cache/
'wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits' -> 'local_wcs_cache/wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits'
wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits exists and is non-empty
Saving wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits to local_wcs_cache/
'wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits' -> 'local_wcs_cache/wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits'
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits (1st reference image)
verification OK: wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Image size: 937.6'x624.6' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 00:00:00.437 -10:00:06.37 J2000 4789.000 3195.000
###################################
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits (1st new image)
verification OK: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
Image size: 941.3'x626.8' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 00:00:06.316 -09:58:25.27 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 00:00:00.437 -10:00:06.37
Second-epoch image center 00:00:06.316 -09:58:25.27
Angular distance between the image centers 0.0370 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits (2nd new image)
verification OK: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Image size: 941.3'x626.8' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 00:00:09.271 -09:59:05.56 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 00:00:00.437 -10:00:06.37
Second-epoch image center 00:00:09.271 -09:59:05.56
Angular distance between the image centers 0.0400 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 00:00:06.316 -09:58:25.27
Second-epoch second image center 00:00:09.271 -09:59:05.56
Angular distance between the image centers 0.01650 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits &> /tmp/tmp.Gs40J8wMbQ
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits &> /tmp/tmp.edLZd9YP66
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits &> /tmp/tmp.F1a9g52Bd7
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits &> /tmp/tmp.0m8rLzIiNr
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Calibrating the magnitude scale
Found non-empty wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits and wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits and wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
Found non-empty wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits and wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
The reference image (wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits) and catalog (wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat) found
'wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat' -> 'wcsmag.cat'
The field straddles RA=0: the RA boundaries wrap around (min > max)
Read 4374 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 351.9535 to 8.0780 deg, Dec -15.2625 to -4.6835 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 351.9535 to 8.0780 deg, Dec -15.2625 to -4.6835 deg
Loaded 4197 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3165 out of 3236 total matches.
Matched with Tycho-2 3236 out of 4374 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.569700
a=0.000000 b=1.000000 c=22.569700
From vast_summary.log: estimated ref. image limiting mag.: -7.87
Updating vast_summary.log: Estimated ref. image limiting mag.: 14.70
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 14.70
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
The field straddles RA=0: the RA boundaries wrap around (min > max)
Read 4374 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 351.9535 to 8.0780 deg, Dec -15.2625 to -4.6835 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 351.9535 to 8.0780 deg, Dec -15.2625 to -4.6835 deg
Loaded 4197 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3165 out of 3236 total matches.
Matched with Tycho-2 3236 out of 4374 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Forced-photometry filter: calibrated wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits -> calib.txt_param_ref_wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits (aperture=7.1)
The field straddles RA=0: the RA boundaries wrap around (min > max)
Read 4358 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 351.9535 to 8.0779 deg, Dec -15.2626 to -4.6837 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 351.9535 to 8.0779 deg, Dec -15.2626 to -4.6837 deg
Loaded 4197 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3202 out of 3251 total matches.
Matched with Tycho-2 3251 out of 4358 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
Forced-photometry filter: calibrated wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits -> calib.txt_param_ref_wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits (aperture=6.5)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 0 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.6 pix Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
2.3 pix Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
2.1 pix fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
2.1 pix fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Limiting magnitude estimates:
14.7 mag. Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
14.7 mag. Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
13.9 mag. fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
13.9 mag. fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
All-image limiting magnitude estimate: 13.9 (SNR ) 10.8 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.Gs40J8wMbQ (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits' -> 'wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
WCS_IMAGE_NAME=wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
WCS-calibrated image found: wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Checking if the catalog wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat corresponding to the image wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits alredy exist and is non-empty...
Catalog wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat corresponding to the image wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
WCS catalog name: wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=278, bad_region=0, passed=4374
Got 4374 stars (including 4092 good ones) from the SExtractor catalog wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
util/solve_plate_with_UCAC5 got 4374 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.6'
Seting catalog search parameters based on the expected field of view 937.6 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013022 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010418 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.9535 through 0 to 8.0780, gap 8.0780 to 351.9535
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 3993 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3991 matched stars entering correct_measured_positions(), 3991 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3991 matched stars entering correct_measured_positions(), 4374 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.9539 through 0 to 8.0777, gap 8.0777 to 351.9539
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 3993 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 3991 matched stars entering correct_measured_positions(), 4374 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Accuracy estimation diagnostic: 3991 matched stars entering correct_measured_positions(), 4374 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Excluding outliers - 3991 stars left (next iteration limit 4390)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits N_match=3991 sigma_overall_arcsec=0.350 sigma_q1_arcsec=0.348 sigma_q2_arcsec=0.331 sigma_q3_arcsec=0.388 sigma_q4_arcsec=0.337 n_q1=1080 n_q2=969 n_q3=999 n_q4=943 worst_quadrant_to_overall_ratio=1.109
The image catalog is written to wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits -region wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.edLZd9YP66 (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits' -> 'wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
WCS_IMAGE_NAME=wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
WCS-calibrated image found: wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
Checking if the catalog wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat corresponding to the image wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits alredy exist and is non-empty...
Catalog wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat corresponding to the image wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
WCS catalog name: wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=264, bad_region=0, passed=4358
Got 4358 stars (including 4088 good ones) from the SExtractor catalog wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat
util/solve_plate_with_UCAC5 got 4358 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.4'
Seting catalog search parameters based on the expected field of view 937.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013019 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010416 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.9535 through 0 to 8.0779, gap 8.0779 to 351.9535
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 3990 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3988 matched stars entering correct_measured_positions(), 3988 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 3988 matched stars entering correct_measured_positions(), 4358 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.9539 through 0 to 8.0776, gap 8.0776 to 351.9539
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 3990 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 3988 matched stars entering correct_measured_positions(), 4358 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Accuracy estimation diagnostic: 3988 matched stars entering correct_measured_positions(), 4358 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Excluding outliers - 3988 stars left (next iteration limit 4386)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits N_match=3988 sigma_overall_arcsec=0.291 sigma_q1_arcsec=0.274 sigma_q2_arcsec=0.314 sigma_q3_arcsec=0.312 sigma_q4_arcsec=0.280 n_q1=1022 n_q2=971 n_q3=1079 n_q4=916 worst_quadrant_to_overall_ratio=1.078
The image catalog is written to wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits -region wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.F1a9g52Bd7 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
WCS_IMAGE_NAME=wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
WCS-calibrated image found: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
Checking if the catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat corresponding to the image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat corresponding to the image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
WCS catalog name: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=216, bad_region=1, passed=1856
Got 1856 stars (including 1636 good ones) from the SExtractor catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat
util/solve_plate_with_UCAC5 got 1856 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.3'
Seting catalog search parameters based on the expected field of view 941.3 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013074 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010459 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.6380 through 0 to 8.1459, gap 8.1459 to 351.6380
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.5 to -4.3)
Done reading UCAC5 zone files...
Matched 1580 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1578 matched stars entering correct_measured_positions(), 1578 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1578 matched stars entering correct_measured_positions(), 1856 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.6377 through 0 to 8.1462, gap 8.1462 to 351.6377
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.5 to -4.3)
Done reading UCAC5 zone files...
Matched 1580 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 1578 matched stars entering correct_measured_positions(), 1856 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Accuracy estimation diagnostic: 1578 matched stars entering correct_measured_positions(), 1856 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Excluding outliers - 1578 stars left (next iteration limit 1735)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=1578 robust_rms=12.427 arcsec worst_quadrant_rms=13.046 arcsec
SIP_REFIT: SIP order 3 trial: matched=1578 robust_rms=0.466 arcsec worst_quadrant_rms=0.508 arcsec
SIP_REFIT: SIP order 5 trial: matched=1578 robust_rms=0.308 arcsec worst_quadrant_rms=0.329 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=1578 robust_rms_before=1.110 arcsec robust_rms_before_corrected=0.315 arcsec robust_rms_after=0.308 arcsec worst_quadrant_rms_before=0.363 worst_quadrant_rms_after=0.329
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.363 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits N_match=1578 sigma_overall_arcsec=0.315 sigma_q1_arcsec=0.309 sigma_q2_arcsec=0.357 sigma_q3_arcsec=0.310 sigma_q4_arcsec=0.295 n_q1=363 n_q2=396 n_q3=421 n_q4=398 worst_quadrant_to_overall_ratio=1.132
The image catalog is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits -region wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.0m8rLzIiNr (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
WCS_IMAGE_NAME=wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
WCS-calibrated image found: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Checking if the catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat corresponding to the image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat corresponding to the image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
WCS catalog name: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=225, bad_region=0, passed=1749
Got 1749 stars (including 1522 good ones) from the SExtractor catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat
util/solve_plate_with_UCAC5 got 1749 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.3'
Seting catalog search parameters based on the expected field of view 941.3 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013074 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010459 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.6380 through 0 to 8.1603, gap 8.1603 to 351.6380
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.5 to -4.3)
Done reading UCAC5 zone files...
Matched 1466 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1464 matched stars entering correct_measured_positions(), 1463 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 1464 matched stars entering correct_measured_positions(), 1748 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.6377 through 0 to 8.1606, gap 8.1606 to 351.6377
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.5 to -4.3)
Done reading UCAC5 zone files...
Matched 1467 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 1465 matched stars entering correct_measured_positions(), 1749 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Accuracy estimation diagnostic: 1465 matched stars entering correct_measured_positions(), 1749 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Excluding outliers - 1465 stars left (next iteration limit 1610)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=1465 robust_rms=12.491 arcsec worst_quadrant_rms=13.376 arcsec
SIP_REFIT: SIP order 3 trial: matched=1465 robust_rms=0.495 arcsec worst_quadrant_rms=0.560 arcsec
SIP_REFIT: SIP order 5 trial: matched=1465 robust_rms=0.347 arcsec worst_quadrant_rms=0.381 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=1465 robust_rms_before=1.114 arcsec robust_rms_before_corrected=0.355 arcsec robust_rms_after=0.347 arcsec worst_quadrant_rms_before=0.379 worst_quadrant_rms_after=0.381
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.379 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits N_match=1465 sigma_overall_arcsec=0.363 sigma_q1_arcsec=0.365 sigma_q2_arcsec=0.406 sigma_q3_arcsec=0.357 sigma_q4_arcsec=0.309 n_q1=349 n_q2=371 n_q3=374 n_q4=371 worst_quadrant_to_overall_ratio=1.120
The image catalog is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits -region wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits sigma_overall=0.350 worst_q_ratio=1.109
ref2=Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits sigma_overall=0.291 worst_q_ratio=1.078
new1=fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits sigma_overall=0.315 worst_q_ratio=1.132
new2=fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits sigma_overall=0.363 worst_q_ratio=1.120
reference average sigma_overall=0.3205 worst_q_ratio=1.0935
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021_astrometric_residuals.png (3991 matched stars from wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.31 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490_astrometric_residuals.png (3988 matched stars from wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.27 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480_astrometric_residuals.png (1578 matched stars from wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.28 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481_astrometric_residuals.png (1465 matched stars from wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.33 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits'
Saving fully-calibrated image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits'
Preparing the HTML report for the field Cet-05-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
No candidates found here
Prepared the HTML report for the field Cet-05-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
SExtractor catalog cache: saved Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.cat to cache
SExtractor catalog cache: saved Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Creating symlink local_wcs_cache/wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
Creating symlink local_wcs_cache/wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
Creating symlink local_wcs_cache/wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Creating symlink local_wcs_cache/exclusion_list.txt
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits exists and is non-empty
wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits exists and is non-empty
wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits exists and is non-empty
wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits (1st reference image)
verification OK: wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Image size: 937.6'x624.6' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 00:00:00.437 -10:00:06.37 J2000 4789.000 3195.000
###################################
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits (1st new image)
verification OK: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
Image size: 941.3'x626.8' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 00:00:06.316 -09:58:25.27 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 00:00:00.437 -10:00:06.37
Second-epoch image center 00:00:06.316 -09:58:25.27
Angular distance between the image centers 0.0370 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits (2nd new image)
verification OK: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Image size: 941.3'x626.8' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 00:00:09.271 -09:59:05.56 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 00:00:00.437 -10:00:06.37
Second-epoch image center 00:00:09.271 -09:59:05.56
Angular distance between the image centers 0.0400 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 00:00:06.316 -09:58:25.27
Second-epoch second image center 00:00:09.271 -09:59:05.56
Angular distance between the image centers 0.01650 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits &> /tmp/tmp.vTWJtG4o9q
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits &> /tmp/tmp.ON6Mg3kwF4
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits &> /tmp/tmp.UolptPMvbK
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits &> /tmp/tmp.b93h5A8uoc
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Calibrating the magnitude scale
Found non-empty wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits and wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits and wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
Found non-empty wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits and wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
The reference image (wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits) and catalog (wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat) found
'wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat' -> 'wcsmag.cat'
The field straddles RA=0: the RA boundaries wrap around (min > max)
Read 22737 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 351.9459 to 8.0985 deg, Dec -15.2699 to -4.6646 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 351.9459 to 8.0985 deg, Dec -15.2699 to -4.6646 deg
Loaded 4214 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3418 out of 3629 total matches.
Matched with Tycho-2 3629 out of 22737 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.388800
a=0.000000 b=1.000000 c=22.388800
From vast_summary.log: estimated ref. image limiting mag.: -7.56
Updating vast_summary.log: Estimated ref. image limiting mag.: 14.83
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 14.83
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
The field straddles RA=0: the RA boundaries wrap around (min > max)
Read 22737 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 351.9459 to 8.0985 deg, Dec -15.2699 to -4.6646 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 351.9459 to 8.0985 deg, Dec -15.2699 to -4.6646 deg
Loaded 4214 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3418 out of 3629 total matches.
Matched with Tycho-2 3629 out of 22737 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Forced-photometry filter: calibrated wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits -> calib.txt_param_ref_wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits (aperture=5.3)
The field straddles RA=0: the RA boundaries wrap around (min > max)
Read 23415 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 351.9462 to 8.0901 deg, Dec -15.2699 to -4.6646 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 351.9462 to 8.0901 deg, Dec -15.2699 to -4.6646 deg
Loaded 4212 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3459 out of 3633 total matches.
Matched with Tycho-2 3633 out of 23415 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
Forced-photometry filter: calibrated wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits -> calib.txt_param_ref_wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits (aperture=5.1)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 16 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.4 pix Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
2.2 pix Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
1.9 pix fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
1.9 pix fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Limiting magnitude estimates:
14.8 mag. Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
14.9 mag. Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
14.0 mag. fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
14.0 mag. fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
All-image limiting magnitude estimate: 14.0 (SNR ) 13.4 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.vTWJtG4o9q (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits' -> 'wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
WCS_IMAGE_NAME=wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
WCS-calibrated image found: wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
Checking if the catalog wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat corresponding to the image wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits alredy exist and is non-empty...
Catalog wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat corresponding to the image wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits
WCS catalog name: wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=8, blended=913, bad_region=0, passed=22729
Got 22729 stars (including 21779 good ones) from the SExtractor catalog wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat
util/solve_plate_with_UCAC5 got 22729 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.6'
Seting catalog search parameters based on the expected field of view 937.6 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013022 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010418 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.9459 through 0 to 8.0985, gap 8.0985 to 351.9459
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4870 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4864 matched stars entering correct_measured_positions(), 4864 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4864 matched stars entering correct_measured_positions(), 22729 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.9463 through 0 to 8.0982, gap 8.0982 to 351.9463
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4870 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4864 matched stars entering correct_measured_positions(), 22729 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Accuracy estimation diagnostic: 4864 matched stars entering correct_measured_positions(), 22729 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Excluding outliers - 4864 stars left (next iteration limit 5350)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits N_match=4864 sigma_overall_arcsec=0.353 sigma_q1_arcsec=0.355 sigma_q2_arcsec=0.325 sigma_q3_arcsec=0.415 sigma_q4_arcsec=0.337 n_q1=1269 n_q2=1240 n_q3=1176 n_q4=1179 worst_quadrant_to_overall_ratio=1.175
The image catalog is written to wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits -region wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.ON6Mg3kwF4 (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits' -> 'wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
WCS_IMAGE_NAME=wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
WCS-calibrated image found: wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
Checking if the catalog wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat corresponding to the image wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits alredy exist and is non-empty...
Catalog wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat corresponding to the image wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits
WCS catalog name: wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=7, blended=831, bad_region=0, passed=23408
Got 23408 stars (including 22542 good ones) from the SExtractor catalog wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat
util/solve_plate_with_UCAC5 got 23408 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.4'
Seting catalog search parameters based on the expected field of view 937.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013019 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010416 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.9462 through 0 to 8.0901, gap 8.0901 to 351.9462
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4864 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4860 matched stars entering correct_measured_positions(), 4860 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4860 matched stars entering correct_measured_positions(), 23408 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.9465 through 0 to 8.0899, gap 8.0899 to 351.9465
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4864 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4860 matched stars entering correct_measured_positions(), 23408 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Accuracy estimation diagnostic: 4860 matched stars entering correct_measured_positions(), 23408 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Excluding outliers - 4860 stars left (next iteration limit 5346)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits N_match=4860 sigma_overall_arcsec=0.295 sigma_q1_arcsec=0.270 sigma_q2_arcsec=0.305 sigma_q3_arcsec=0.327 sigma_q4_arcsec=0.297 n_q1=1259 n_q2=1185 n_q3=1245 n_q4=1171 worst_quadrant_to_overall_ratio=1.107
The image catalog is written to wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits -region wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.UolptPMvbK (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
WCS_IMAGE_NAME=wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
WCS-calibrated image found: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
Checking if the catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat corresponding to the image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat corresponding to the image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
WCS catalog name: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=4, blended=396, bad_region=2, passed=13938
Got 13938 stars (including 13511 good ones) from the SExtractor catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat
util/solve_plate_with_UCAC5 got 13938 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.3'
Seting catalog search parameters based on the expected field of view 941.3 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013074 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010459 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.6380 through 0 to 8.1988, gap 8.1988 to 351.6380
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 431 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4871 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4866 matched stars entering correct_measured_positions(), 4866 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4866 matched stars entering correct_measured_positions(), 13938 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.6377 through 0 to 8.1993, gap 8.1993 to 351.6377
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 431 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4871 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4866 matched stars entering correct_measured_positions(), 13938 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Accuracy estimation diagnostic: 4866 matched stars entering correct_measured_positions(), 13938 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Excluding outliers - 4866 stars left (next iteration limit 5352)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits N_match=4866 sigma_overall_arcsec=0.385 sigma_q1_arcsec=0.385 sigma_q2_arcsec=0.400 sigma_q3_arcsec=0.372 sigma_q4_arcsec=0.377 n_q1=1221 n_q2=1299 n_q3=1170 n_q4=1176 worst_quadrant_to_overall_ratio=1.040
The image catalog is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits -region wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.b93h5A8uoc (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
WCS_IMAGE_NAME=wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
WCS-calibrated image found: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Checking if the catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat corresponding to the image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat corresponding to the image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
WCS catalog name: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=421, bad_region=1, passed=13562
Got 13562 stars (including 13114 good ones) from the SExtractor catalog wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat
util/solve_plate_with_UCAC5 got 13562 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.3'
Seting catalog search parameters based on the expected field of view 941.3 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013074 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010459 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.6380 through 0 to 8.2148, gap 8.2148 to 351.6380
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 433 (Dec -15.6 to -3.7)
Done reading UCAC5 zone files...
Matched 4871 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4864 matched stars entering correct_measured_positions(), 4864 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4864 matched stars entering correct_measured_positions(), 13561 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
RA wraps around 0/360 boundary: field RA 351.6376 through 0 to 8.2151, gap 8.2151 to 351.6376
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 433 (Dec -15.6 to -3.7)
Done reading UCAC5 zone files...
Matched 4870 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4864 matched stars entering correct_measured_positions(), 13561 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
Accuracy estimation diagnostic: 4864 matched stars entering correct_measured_positions(), 13561 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
Excluding outliers - 4864 stars left (next iteration limit 5350)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits N_match=4864 sigma_overall_arcsec=0.419 sigma_q1_arcsec=0.417 sigma_q2_arcsec=0.436 sigma_q3_arcsec=0.415 sigma_q4_arcsec=0.413 n_q1=1211 n_q2=1291 n_q3=1151 n_q4=1211 worst_quadrant_to_overall_ratio=1.041
The image catalog is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits -region wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-11-36_20.00sec_0.00C_LIGHTs_0480.fits
Saving fully-calibrated image wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-08-06_CI_Cet-05-Q1b1x1_061651_TTUQ1b1x1_2277540_i9UHyhrS/wcs_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481.fits
Preparing the HTML report for the field Cet-05-Q1b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:59:45.80 -05:52:34.4: 12.57 +/- 0.03 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 00:30:00.34 -09:52:26.7: 12.35 +/- 0.02 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:57:51.42 -07:49:34.2: 12.47 +/- 0.02 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:43:36.28 -07:55:57.2: 11.76 +/- 0.01 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 00:11:36.46 -10:26:17.3: 15.51 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:52:55.96 -05:44:43.3: 15.43 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 00:08:16.97 -14:50:38.4: 12.57 +/- 0.03 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:52:48.93 -06:31:08.1: 13.29 +/- 0.05 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:45:29.49 -08:33:38.9: 15.45 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:48:06.70 -07:36:47.9: 12.85 +/- 0.04 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:59:45.80 -05:52:34.4: 12.52 +/- 0.03 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:52:55.96 -05:44:43.3: 15.47 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:57:51.42 -07:49:34.2: 12.70 +/- 0.03 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 00:11:36.46 -10:26:17.3: 15.54 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 00:08:16.97 -14:50:38.4: 12.66 +/- 0.04 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:43:36.28 -07:55:57.2: 12.08 +/- 0.02 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 00:30:00.34 -09:52:26.7: 12.40 +/- 0.02 detection
Forced photometry reference-image weighted average: 12.54 +/- 0.02
Forced photometry reference-image weighted average: 12.57 +/- 0.02
Forced photometry reference-image weighted average: 12.61 +/- 0.02
Forced photometry filter REJECTED candidate at 23:57:51.42 -07:49:34.2: ref_mag=12.57 +/- 0.02 new_mean_mag=13.3995 delta=-0.83 (need > 0.90)
Forced photometry reference-image weighted average: 11.88 +/- 0.01
Forced photometry reference-image weighted average: 12.37 +/- 0.02
Forced photometry filter REJECTED candidate at 23:59:45.80 -05:52:34.4: ref_mag=12.54 +/- 0.02 new_mean_mag=12.5991 delta=-0.06 (need > 0.90)
Forced photometry filter REJECTED candidate at 00:08:16.97 -14:50:38.4: ref_mag=12.61 +/- 0.02 new_mean_mag=12.5341 delta=0.08 (need > 0.90)
Forced photometry filter REJECTED candidate at 23:43:36.28 -07:55:57.2: ref_mag=11.88 +/- 0.01 new_mean_mag=12.6738 delta=-0.80 (need > 0.90)
Forced photometry filter REJECTED candidate at 00:30:00.34 -09:52:26.7: ref_mag=12.37 +/- 0.02 new_mean_mag=12.8068 delta=-0.43 (need > 0.90)
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:52:48.93 -06:31:08.1: 13.24 +/- 0.05 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:45:29.49 -08:33:38.9: 15.46 +/- 99.00 upperlimit
Forced photometry reference-image weighted average: 13.26 +/- 0.03
Forced photometry filter REJECTED candidate at 23:52:48.93 -06:31:08.1: ref_mag=13.26 +/- 0.03 new_mean_mag=13.4069 delta=-0.15 (need > 0.90)
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:48:06.70 -07:36:47.9: 13.03 +/- 0.04 detection
Forced photometry reference-image weighted average: 12.93 +/- 0.03
Forced photometry filter REJECTED candidate at 23:48:06.70 -07:36:47.9: ref_mag=12.93 +/- 0.03 new_mean_mag=13.3841 delta=-0.46 (need > 0.90)
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 00:00:47.19 -09:01:11.2: 13.61 +/- 0.07 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:37:12.78 -06:24:34.4: 15.27 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-21_05-32-04_20.00sec_5.00C_LIGHT_1021.fits at 23:47:53.73 -04:56:09.5: 13.18 +/- 0.05 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 00:00:47.19 -09:01:11.2: 13.78 +/- 0.07 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:47:53.73 -04:56:09.5: 13.46 +/- 0.07 detection
Forced photometry on wcs_Cet-05-Q1b1x1_2026-07-22_05-26-37_20.00sec_5.00C_LIGHT_0490.fits at 23:37:12.78 -06:24:34.4: 15.31 +/- 99.00 upperlimit
Forced photometry reference-image weighted average: 13.69 +/- 0.05
Forced photometry reference-image weighted average: 13.29 +/- 0.04
Forced photometry filter REJECTED candidate at 23:47:53.73 -04:56:09.5: ref_mag=13.29 +/- 0.04 new_mean_mag=13.7731 delta=-0.48 (need > 0.90)
Forced photometry filter REJECTED candidate at 00:00:47.19 -09:01:11.2: ref_mag=13.69 +/- 0.05 new_mean_mag=14.0562 delta=-0.37 (need > 0.90)
Adding exclusion_list_local.txt__out32552.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out32570.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out32705.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out32933.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 7s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 3s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32351_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32351_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32354_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32354_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32355_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32355_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32528_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32528_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
**** FOUND 00:26:59.33 -06:35:47.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32533_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32533_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
**** FOUND 00:05:10.84 -05:41:48.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32547_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32547_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32552_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
Preparing report for the candidate 32552_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32570_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
Preparing report for the candidate 32570_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32571_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32571_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
**** FOUND 23:39:41.71 -14:14:08.3 in the exclusion list exclusion_list_bsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32586_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32586_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32669_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32669_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32702_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32702_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32705_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
Preparing report for the candidate 32705_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32775_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32775_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32933_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
Preparing report for the candidate 32933_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 32968_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481
The candidate 32968_fd_Cet-05-Q1b1x1_2026-08-06_06-12-24_20.00sec_-0.00C_LIGHTs_0481 did not pass the final checks