This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 07 23.4204 2461244.9204 8.08 01:39:25.59 +01:42:01.1
146.68019 -58.94093 galactic Cet Second-epoch detections are separated by 0.4" and 8.2 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.4 Vesta -0 -2 2 7.9 0 0
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:39:25.59 +01:42:01.1: 15.90 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:39:25.59 +01:42:01.1: 15.89 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 07 23.4204* 01 39 25.59 +01 42 01.1 8.1 U Cet 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461244.9204,8.08,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260723.4204 8.08CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 07 23.4204 2461244.9204 9.62 01:26:59.88 +02:10:46.9
140.62686 -59.46484 galactic Cet Second-epoch detections are separated by 0.3" and 8.2 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.2 Pallas -0 -0 0 9.6 0 0
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:26:59.88 +02:10:46.9: 15.77 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:26:59.88 +02:10:46.9: 15.80 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 07 23.4204* 01 26 59.88 +02 10 46.9 9.6 U Cet 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461244.9204,9.62,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260723.4204 9.62CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 07 23.4204 2461244.9204 13.24 01:52:24.21 -00:34:59.4
154.31951 -59.68698 galactic Cet Second-epoch detections are separated by 0.8" and 8.1 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.505 Cava -1 -0 1 13.3 0 0
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:52:24.21 -00:34:59.4: 16.13 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:52:24.21 -00:34:59.4: 16.13 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 07 23.4204* 01 52 24.21 +00 34 59.4 13.2 U Cet 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461244.9204,13.24,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260723.4204 13.24CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 07 23.4204 2461244.9204 13.60 01:52:30.12 +00:33:17.4
153.34714 -58.66353 galactic Cet Second-epoch detections are separated by 0.9" and 8.1 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.360 Carlova -1 -1 1 13.6 0 0
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:52:30.12 +00:33:17.4: 15.96 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:52:30.12 +00:33:17.4: 15.98 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 07 23.4204* 01 52 30.12 +00 33 17.4 13.6 U Cet 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461244.9204,13.60,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260723.4204 13.60CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461049.62882272 09.01.2026 03:05:20.283 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
First image: 2461049.62882272 09.01.2026 03:05:20.283 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
Last image: 2461244.92067059 23.07.2026 10:05:35.939 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 4
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.64
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 7 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
Total objects detected (at least 2 times): 5210
Objects passed selection criteria: 5191
Measurements per detected object (mean, median, min, max): 2.9 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.9 2.0 2 4
Average stars detected per image: 3941
Average stars matched: 3636.75 (92.2799 %)
Memory usage VmPeak: 114252 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Wed Jul 22 16:05:55 CDT 2026
VaST build number 1.0rc89-166-g55a66cb7
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-07-22)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Thu Jul 23 07:15:05 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461049.62882272 09.01.2026 03:05:20.283 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
First image: 2461049.62882272 09.01.2026 03:05:20.283 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
Last image: 2461244.92067059 23.07.2026 10:05:35.939 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 10
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.36
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 29 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
Total objects detected (at least 2 times): 28571
Objects passed selection criteria: 28504
Measurements per detected object (mean, median, min, max): 3.0 3.0 2 4
Measurements per selected object (mean, median, min, max): 3.0 3.0 2 4
Average stars detected per image: 22159.5
Average stars matched: 20443 (92.2539 %)
Memory usage VmPeak: 133000 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Wed Jul 22 16:05:55 CDT 2026
VaST build number 1.0rc89-166-g55a66cb7
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-07-22)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Thu Jul 23 07:18:31 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ2b1x1/TTUQ2_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
SExtractor catalog cache: saved Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.cat to cache
SExtractor catalog cache: saved Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461244.92017675
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
'asassn_transients_list.txt' -> '../asassn_transients_list.txt'
'tocp_transients_list.txt' -> '../tocp_transients_list.txt'
wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits exists and is non-empty
Saving wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits to local_wcs_cache/
'wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits' -> 'local_wcs_cache/wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits'
wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits exists and is non-empty
Saving wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits to local_wcs_cache/
'wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits' -> 'local_wcs_cache/wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits'
wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits exists and is non-empty
Saving wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits to local_wcs_cache/
'wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits' -> 'local_wcs_cache/wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits'
wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits exists and is non-empty
Saving wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits to local_wcs_cache/
'wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits' -> 'local_wcs_cache/wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits'
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits (1st reference image)
verification OK: wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
Image size: 941.4'x627.0' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 01:42:59.985 -01:58:46.85 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits (1st new image)
verification OK: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
Image size: 937.1'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 01:42:52.387 -01:59:43.39 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 01:42:59.985 -01:58:46.85
Second-epoch image center 01:42:52.387 -01:59:43.39
Angular distance between the image centers 0.0353 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits (2nd new image)
verification OK: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Image size: 937.1'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 01:42:55.534 -01:59:54.99 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 01:42:59.985 -01:58:46.85
Second-epoch image center 01:42:55.534 -01:59:54.99
Angular distance between the image centers 0.0265 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 01:42:52.387 -01:59:43.39
Second-epoch second image center 01:42:55.534 -01:59:54.99
Angular distance between the image centers 0.01350 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits &> /tmp/tmp.UxfBErJbts
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits &> /tmp/tmp.unWHyHsHhP
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits &> /tmp/tmp.C9eWwqO2Sw
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits &> /tmp/tmp.SLSAsYg4Cs
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Calibrating the magnitude scale
Found non-empty wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits and wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits and wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
Found non-empty wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits and wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
The reference image (wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits) and catalog (wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat) found
'wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat' -> 'wcsmag.cat'
Read 5890 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.8519 to 33.6862 deg, Dec -7.2827 to +3.3397 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.8519 to 33.6862 deg, Dec -7.2827 to 3.3397 deg
Loaded 4100 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3365 out of 3520 total matches.
Matched with Tycho-2 3520 out of 5890 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.890900
a=0.000000 b=1.000000 c=22.890900
From vast_summary.log: estimated ref. image limiting mag.: -7.64
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.25
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.25
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 5890 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.8519 to 33.6862 deg, Dec -7.2827 to +3.3397 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.8519 to 33.6862 deg, Dec -7.2827 to 3.3397 deg
Loaded 4100 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3365 out of 3520 total matches.
Matched with Tycho-2 3520 out of 5890 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits:
Forced-photometry filter: calibrated wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits -> calib.txt_param_ref_wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits (aperture=5.8)
Read 5840 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.8348 to 33.6842 deg, Dec -7.2949 to +3.3141 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.8348 to 33.6842 deg, Dec -7.2949 to 3.3141 deg
Loaded 4103 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3377 out of 3520 total matches.
Matched with Tycho-2 3520 out of 5840 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits:
Forced-photometry filter: calibrated wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits -> calib.txt_param_ref_wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits (aperture=5.9)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 3 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.0 pix Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
2.0 pix Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
2.3 pix fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
2.3 pix fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
2.0 pix wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
2.0 pix wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
Limiting magnitude estimates:
15.2 mag. Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
15.2 mag. Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
14.7 mag. fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
14.7 mag. fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
All-image limiting magnitude estimate: 14.7 (SNR ) 11.8 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.UxfBErJbts (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits' -> 'wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
WCS_IMAGE_NAME=wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
WCS-calibrated image found: wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
Checking if the catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat corresponding to the image wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits alredy exist and is non-empty...
Catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat corresponding to the image wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
WCS catalog name: wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=428, bad_region=1312, passed=5890
Got 5890 stars (including 4219 good ones) from the SExtractor catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
util/solve_plate_with_UCAC5 got 5890 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.4'
Seting catalog search parameters based on the expected field of view 941.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013075 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010460 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 979 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 975 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 4652 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 979 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 4653 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 4653 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Excluding outliers - 978 stars left (next iteration limit 1075)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits N_match=978 sigma_overall_arcsec=0.303 sigma_q1_arcsec=0.411 sigma_q2_arcsec=0.291 sigma_q3_arcsec=0.246 sigma_q4_arcsec=0.246 n_q1=307 n_q2=195 n_q3=307 n_q4=169 worst_quadrant_to_overall_ratio=1.353
The image catalog is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits -region wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.unWHyHsHhP (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits' -> 'wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
WCS_IMAGE_NAME=wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
WCS-calibrated image found: wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
Checking if the catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat corresponding to the image wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits alredy exist and is non-empty...
Catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat corresponding to the image wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
WCS catalog name: wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=411, bad_region=1306, passed=5840
Got 5840 stars (including 4199 good ones) from the SExtractor catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat
util/solve_plate_with_UCAC5 got 5840 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.4'
Seting catalog search parameters based on the expected field of view 941.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013075 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010460 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 979 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 974 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 4622 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 979 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 4622 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 4622 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
Excluding outliers - 978 stars left (next iteration limit 1075)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits N_match=978 sigma_overall_arcsec=0.313 sigma_q1_arcsec=0.369 sigma_q2_arcsec=0.309 sigma_q3_arcsec=0.280 sigma_q4_arcsec=0.282 n_q1=314 n_q2=193 n_q3=302 n_q4=169 worst_quadrant_to_overall_ratio=1.181
The image catalog is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits -region wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.C9eWwqO2Sw (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
WCS_IMAGE_NAME=wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
WCS-calibrated image found: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
Checking if the catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat corresponding to the image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat corresponding to the image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
WCS catalog name: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=252, bad_region=1020, passed=4379
Got 4379 stars (including 3158 good ones) from the SExtractor catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat
util/solve_plate_with_UCAC5 got 4379 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 973 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 972 matched stars entering correct_measured_positions(), 971 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 972 matched stars entering correct_measured_positions(), 3509 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 973 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 972 matched stars entering correct_measured_positions(), 3509 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Accuracy estimation diagnostic: 972 matched stars entering correct_measured_positions(), 3509 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.34"
Excluding outliers - 972 stars left (next iteration limit 1069)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits N_match=972 sigma_overall_arcsec=0.352 sigma_q1_arcsec=0.320 sigma_q2_arcsec=0.421 sigma_q3_arcsec=0.350 sigma_q4_arcsec=0.368 n_q1=295 n_q2=173 n_q3=312 n_q4=192 worst_quadrant_to_overall_ratio=1.197
The image catalog is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits -region wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.SLSAsYg4Cs (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
WCS_IMAGE_NAME=wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
WCS-calibrated image found: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Checking if the catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat corresponding to the image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat corresponding to the image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
WCS catalog name: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=247, bad_region=1017, passed=4395
Got 4395 stars (including 3180 good ones) from the SExtractor catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat
util/solve_plate_with_UCAC5 got 4395 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 973 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 972 matched stars entering correct_measured_positions(), 970 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 972 matched stars entering correct_measured_positions(), 3524 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 973 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 972 matched stars entering correct_measured_positions(), 3525 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Accuracy estimation diagnostic: 972 matched stars entering correct_measured_positions(), 3525 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Excluding outliers - 972 stars left (next iteration limit 1069)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits N_match=972 sigma_overall_arcsec=0.350 sigma_q1_arcsec=0.333 sigma_q2_arcsec=0.387 sigma_q3_arcsec=0.337 sigma_q4_arcsec=0.349 n_q1=296 n_q2=173 n_q3=312 n_q4=191 worst_quadrant_to_overall_ratio=1.105
The image catalog is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits -region wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits sigma_overall=0.303 worst_q_ratio=1.353
ref2=Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits sigma_overall=0.313 worst_q_ratio=1.181
new1=fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits sigma_overall=0.352 worst_q_ratio=1.197
new2=fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits sigma_overall=0.350 worst_q_ratio=1.105
reference average sigma_overall=0.308 worst_q_ratio=1.267
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077_astrometric_residuals.png (978 matched stars from wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.27 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078_astrometric_residuals.png (978 matched stars from wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.27 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438_astrometric_residuals.png (972 matched stars from wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.31 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439_astrometric_residuals.png (972 matched stars from wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.31 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits'
Saving fully-calibrated image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits'
Preparing the HTML report for the field Cet-03-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:43:45.05 +00:54:36.0: 11.30 +/- 0.01 detection
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:39:25.59 +01:42:01.1: 15.90 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:26:59.88 +02:10:46.9: 15.77 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:43:45.05 +00:54:36.0: 11.26 +/- 0.01 detection
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:39:25.59 +01:42:01.1: 15.89 +/- 99.00 upperlimit
Forced photometry reference-image weighted average: 11.28 +/- 0.00
Forced photometry filter REJECTED candidate at 01:43:45.05 +00:54:36.0: ref_mag=11.28 +/- 0.00 new_mean_mag=11.5493 delta=-0.27 (need > 0.90)
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:26:59.88 +02:10:46.9: 15.80 +/- 99.00 upperlimit
Adding exclusion_list_local.txt__out20254.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out20327.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 9s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 3s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20254_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
Preparing report for the candidate 20254_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20327_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
Preparing report for the candidate 20327_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20803_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
The candidate 20803_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439 did not pass the final checks
make_report_in_HTML.sh Phase 2 (HTML assembly): 0s
make_report_in_HTML.sh TOTAL: 12s
Prepared the HTML report for the field Cet-03-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
01:39:25.59 +01:42:01.1
01:26:59.88 +02:10:46.9
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
SExtractor catalog cache: saved Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.cat to cache
SExtractor catalog cache: saved Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
Creating symlink local_wcs_cache/wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
Creating symlink local_wcs_cache/wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
Creating symlink local_wcs_cache/wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Creating symlink local_wcs_cache/exclusion_list.txt
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits exists and is non-empty
wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits exists and is non-empty
wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits exists and is non-empty
wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits (1st reference image)
verification OK: wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
Image size: 941.4'x627.0' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 01:42:59.985 -01:58:46.85 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits (1st new image)
verification OK: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
Image size: 937.1'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 01:42:52.387 -01:59:43.39 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 01:42:59.985 -01:58:46.85
Second-epoch image center 01:42:52.387 -01:59:43.39
Angular distance between the image centers 0.0353 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits (2nd new image)
verification OK: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Image size: 937.1'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 01:42:55.534 -01:59:54.99 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 01:42:59.985 -01:58:46.85
Second-epoch image center 01:42:55.534 -01:59:54.99
Angular distance between the image centers 0.0265 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 01:42:52.387 -01:59:43.39
Second-epoch second image center 01:42:55.534 -01:59:54.99
Angular distance between the image centers 0.01350 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits &> /tmp/tmp.QtjFcAUE6x
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits &> /tmp/tmp.0uRAfw5QzM
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits &> /tmp/tmp.ID8vhaRJtf
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits &> /tmp/tmp.0SdiPGgka8
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Calibrating the magnitude scale
Found non-empty wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits and wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits and wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
Found non-empty wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits and wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
The reference image (wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits) and catalog (wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat) found
'wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat' -> 'wcsmag.cat'
Read 31778 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.8480 to 33.6862 deg, Dec -7.2827 to +3.3397 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.8480 to 33.6862 deg, Dec -7.2827 to 3.3397 deg
Loaded 4101 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3270 out of 3568 total matches.
Matched with Tycho-2 3568 out of 31778 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.783350
a=0.000000 b=1.000000 c=22.783350
From vast_summary.log: estimated ref. image limiting mag.: -7.36
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.42
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.42
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 31778 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.8480 to 33.6862 deg, Dec -7.2827 to +3.3397 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.8480 to 33.6862 deg, Dec -7.2827 to 3.3397 deg
Loaded 4101 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3270 out of 3568 total matches.
Matched with Tycho-2 3568 out of 31778 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits:
Forced-photometry filter: calibrated wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits -> calib.txt_param_ref_wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits (aperture=4.6)
Read 31614 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 17.8349 to 33.6841 deg, Dec -7.2951 to +3.3304 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 17.8349 to 33.6841 deg, Dec -7.2951 to 3.3304 deg
Loaded 4106 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3281 out of 3574 total matches.
Matched with Tycho-2 3574 out of 31614 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits:
Forced-photometry filter: calibrated wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits -> calib.txt_param_ref_wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits (aperture=4.7)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 8 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
1.9 pix Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
1.9 pix Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
2.2 pix fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
2.2 pix fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
1.9 pix wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
1.9 pix wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
Limiting magnitude estimates:
15.4 mag. Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
15.4 mag. Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
14.8 mag. fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
14.8 mag. fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
All-image limiting magnitude estimate: 14.8 (SNR ) 14.3 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.QtjFcAUE6x (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits' -> 'wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
WCS_IMAGE_NAME=wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
WCS-calibrated image found: wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
Checking if the catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat corresponding to the image wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits alredy exist and is non-empty...
Catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat corresponding to the image wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits
WCS catalog name: wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=6, blended=1245, bad_region=5845, passed=31772
Got 31772 stars (including 24879 good ones) from the SExtractor catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat
util/solve_plate_with_UCAC5 got 31772 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.4'
Seting catalog search parameters based on the expected field of view 941.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013075 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010460 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 978 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 975 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 26326 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 978 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 26326 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Accuracy estimation diagnostic: 978 matched stars entering correct_measured_positions(), 26326 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Excluding outliers - 978 stars left (next iteration limit 1075)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits N_match=978 sigma_overall_arcsec=0.297 sigma_q1_arcsec=0.376 sigma_q2_arcsec=0.303 sigma_q3_arcsec=0.254 sigma_q4_arcsec=0.260 n_q1=304 n_q2=195 n_q3=309 n_q4=170 worst_quadrant_to_overall_ratio=1.266
The image catalog is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits -region wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.0uRAfw5QzM (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits' -> 'wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
WCS_IMAGE_NAME=wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
WCS-calibrated image found: wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
Checking if the catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat corresponding to the image wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits alredy exist and is non-empty...
Catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat corresponding to the image wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits
WCS catalog name: wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=11, blended=1210, bad_region=5832, passed=31603
Got 31603 stars (including 24741 good ones) from the SExtractor catalog wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat
util/solve_plate_with_UCAC5 got 31603 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.4'
Seting catalog search parameters based on the expected field of view 941.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013075 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010460 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 979 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 979 matched stars entering correct_measured_positions(), 976 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 979 matched stars entering correct_measured_positions(), 26251 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 979 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 979 matched stars entering correct_measured_positions(), 26251 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Accuracy estimation diagnostic: 979 matched stars entering correct_measured_positions(), 26252 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Excluding outliers - 979 stars left (next iteration limit 1076)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits N_match=979 sigma_overall_arcsec=0.313 sigma_q1_arcsec=0.364 sigma_q2_arcsec=0.336 sigma_q3_arcsec=0.271 sigma_q4_arcsec=0.287 n_q1=308 n_q2=193 n_q3=307 n_q4=171 worst_quadrant_to_overall_ratio=1.160
The image catalog is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits -region wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.ID8vhaRJtf (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
WCS_IMAGE_NAME=wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
WCS-calibrated image found: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
Checking if the catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat corresponding to the image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat corresponding to the image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
WCS catalog name: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=6, blended=866, bad_region=3908, passed=22667
Got 22667 stars (including 18130 good ones) from the SExtractor catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat
util/solve_plate_with_UCAC5 got 22667 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 977 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 976 matched stars entering correct_measured_positions(), 974 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 976 matched stars entering correct_measured_positions(), 19395 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 977 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 976 matched stars entering correct_measured_positions(), 19395 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Accuracy estimation diagnostic: 976 matched stars entering correct_measured_positions(), 19395 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.34"
Excluding outliers - 976 stars left (next iteration limit 1073)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits N_match=976 sigma_overall_arcsec=0.361 sigma_q1_arcsec=0.299 sigma_q2_arcsec=0.435 sigma_q3_arcsec=0.368 sigma_q4_arcsec=0.372 n_q1=295 n_q2=174 n_q3=316 n_q4=191 worst_quadrant_to_overall_ratio=1.206
The image catalog is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits -region wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.0SdiPGgka8 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
WCS_IMAGE_NAME=wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
WCS-calibrated image found: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Checking if the catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat corresponding to the image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits alredy exist and is non-empty...
Catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat corresponding to the image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
WCS catalog name: wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=6, blended=833, bad_region=3913, passed=22628
Got 22628 stars (including 18120 good ones) from the SExtractor catalog wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat
util/solve_plate_with_UCAC5 got 22628 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 977 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 976 matched stars entering correct_measured_positions(), 974 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 976 matched stars entering correct_measured_positions(), 19337 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 413 to 468 (Dec -7.3 to 3.3)
Done reading UCAC5 zone files...
Matched 977 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 976 matched stars entering correct_measured_positions(), 19337 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Accuracy estimation diagnostic: 976 matched stars entering correct_measured_positions(), 19337 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Excluding outliers - 976 stars left (next iteration limit 1073)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits N_match=976 sigma_overall_arcsec=0.347 sigma_q1_arcsec=0.331 sigma_q2_arcsec=0.376 sigma_q3_arcsec=0.335 sigma_q4_arcsec=0.351 n_q1=295 n_q2=175 n_q3=313 n_q4=193 worst_quadrant_to_overall_ratio=1.085
The image catalog is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits -region wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-04-53_20.00sec_5.00C_LIGHT_0438.fits
Saving fully-calibrated image wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-07-23_CI_Cet-03-Q2b1x1_053958_TTUQ2b1x1_1405972_pXsH6hkZ/wcs_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439.fits
Preparing the HTML report for the field Cet-03-Q2b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:43:45.04 +00:54:36.3: 11.49 +/- 0.01 detection
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:55:14.84 -02:41:22.5: 14.44 +/- 0.09 detection
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:32:56.26 +00:06:03.2: 14.09 +/- 0.07 detection
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:52:24.21 -00:34:59.4: 16.13 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:37:11.86 -04:07:19.2: 14.01 +/- 0.06 detection
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-05-20_20.00sec_-14.90C_LIGHT_0077.fits at 01:52:30.12 +00:33:17.4: 15.96 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:43:45.04 +00:54:36.3: 11.46 +/- 0.01 detection
Forced photometry reference-image weighted average: 11.48 +/- 0.00
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:52:24.21 -00:34:59.4: 16.13 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:32:56.26 +00:06:03.2: 14.02 +/- 0.07 detection
Forced photometry filter REJECTED candidate at 01:43:45.04 +00:54:36.3: ref_mag=11.48 +/- 0.00 new_mean_mag=11.5730 delta=-0.10 (need > 0.90)
Forced photometry reference-image weighted average: 14.05 +/- 0.05
Forced photometry filter REJECTED candidate at 01:32:56.26 +00:06:03.2: ref_mag=14.05 +/- 0.05 new_mean_mag=13.9044 delta=0.15 (need > 0.90)
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:55:14.84 -02:41:22.5: 14.30 +/- 0.08 detection
Forced photometry reference-image weighted average: 14.37 +/- 0.06
Forced photometry filter REJECTED candidate at 01:55:14.84 -02:41:22.5: ref_mag=14.37 +/- 0.06 new_mean_mag=14.4146 delta=-0.05 (need > 0.90)
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:52:30.12 +00:33:17.4: 15.98 +/- 99.00 upperlimit
Forced photometry on wcs_Cet-03-Q2b1x1_2026-01-08_21-06-09_20.00sec_-14.90C_LIGHT_0078.fits at 01:37:11.86 -04:07:19.2: 14.02 +/- 0.07 detection
Forced photometry reference-image weighted average: 14.01 +/- 0.05
Forced photometry filter REJECTED candidate at 01:37:11.86 -04:07:19.2: ref_mag=14.01 +/- 0.05 new_mean_mag=14.0095 delta=0.00 (need > 0.90)
Adding exclusion_list_local.txt__out53721.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out54331.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 11s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 2s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 51649_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
The candidate 51649_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439 did not pass the final checks
**** FOUND 01:39:25.59 +01:42:01.2 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 51722_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
The candidate 51722_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439 did not pass the final checks
**** FOUND 01:26:59.88 +02:10:47.0 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52200_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
The candidate 52200_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 53721_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
Preparing report for the candidate 53721_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54331_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
Preparing report for the candidate 54331_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54860_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
The candidate 54860_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55175_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
The candidate 55175_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56240_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439
The candidate 56240_fd_Cet-03-Q2b1x1_2026-07-23_05-05-35_20.00sec_5.00C_LIGHT_0439 did not pass the final checks