This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 11 03.3310 2461347.8310 10.83 09:04:18.40 +17:00:23.6
211.39726 36.84089 galactic Cnc Second-epoch detections are separated by 0.8" and 1.9 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.27 Euterpe 1 -0 1 11.0 0 -0
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 09:04:18.40 +17:00:23.6: 16.07 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 09:04:18.40 +17:00:23.6: 15.80 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461347.8310,10.83,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261103.3310 10.83CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 11 03.3310 2461347.8310 12.66 08:55:27.17 +13:11:33.7
214.68603 33.39420 galactic Cnc Second-epoch detections are separated by 0.4" and 1.9 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.202 Chryseis 1 -0 1 13.0 0 -0
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 08:55:27.17 +13:11:33.7: 16.22 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 08:55:27.17 +13:11:33.7: 16.09 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461347.8310,12.66,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261103.3310 12.66CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 11 03.3310 2461347.8310 14.16 08:35:31.09 +16:25:42.1
208.96086 30.22820 galactic Cnc Second-epoch detections are separated by 0.7" and 2.2 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.1015 Christa 2 -0 3 15.1 0 0
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 08:35:31.09 +16:25:42.1: 16.09 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 08:35:31.09 +16:25:42.1: 15.94 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461347.8310,14.16,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261103.3310 14.16CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 11 03.3310 2461347.8310 12.94 08:42:12.71 +13:22:23.4
212.95326 30.52167 galactic Cnc Second-epoch detections are separated by 0.7" and 1.8 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.114 Kassandra -0 0 0 13.2 -0 0
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 08:42:12.71 +13:22:23.4: 14.83 +/- 0.12 detection
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 08:42:12.71 +13:22:23.4: 14.94 +/- 0.15 detection
Forced photometry reference-image weighted average: 14.87 +/- 0.09
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461347.8310,12.94,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20261103.3310 12.94CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461093.74344014 22.02.2026 05:50:23.228 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
First image: 2461093.74344014 22.02.2026 05:50:23.228 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Last image: 2461347.83122428 03.11.2026 07:56:47.778 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 2
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.34
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 3 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 9026
Objects passed selection criteria: 9015
Measurements per detected object (mean, median, min, max): 2.8 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.8 2.0 2 4
Average stars detected per image: 6863
Average stars matched: 6306.25 (91.8877 %)
Memory usage VmPeak: 234916 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Oct 15 15:05:03 CDT 2026
VaST build number 1.0rc89-241-g3eca6a38
OpenMP enabled: Yes
SExtractor version 2.25.2 (2026-10-15)
GNU bash, version 5.3.20(1)-release (x86_64-pc-linux-gnu)
Processing completed on Tue Nov 3 02:51:36 CST 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461093.74344014 22.02.2026 05:50:23.228 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
First image: 2461093.74344014 22.02.2026 05:50:23.228 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Last image: 2461347.83122428 03.11.2026 07:56:47.778 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 181
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.04
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 17 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 52298
Objects passed selection criteria: 52154
Measurements per detected object (mean, median, min, max): 2.8 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.8 2.0 2 4
Average stars detected per image: 39593.8
Average stars matched: 36138.8 (91.2739 %)
Memory usage VmPeak: 269996 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Oct 15 15:05:03 CDT 2026
VaST build number 1.0rc89-241-g3eca6a38
OpenMP enabled: Yes
SExtractor version 2.25.2 (2026-10-15)
GNU bash, version 5.3.20(1)-release (x86_64-pc-linux-gnu)
Processing completed on Tue Nov 3 02:53:32 CST 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ2b1x1/TTUQ2_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
SExtractor catalog cache: saved Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.cat to cache
SExtractor catalog cache: saved Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461347.83077978
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits exists and is non-empty
wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits exists and is non-empty
wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits exists and is non-empty
wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits (1st reference image)
verification OK: wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Image size: 937.7'x624.9' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.88"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 08:53:21.014 +14:00:00.07 J2000 4789.000 3195.000
###################################
The image scale is 5.88"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits (1st new image)
verification OK: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
Image size: 938.8'x624.3' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.88"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 08:53:19.979 +13:59:49.51 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 08:53:21.014 +14:00:00.07
Second-epoch image center 08:53:19.979 +13:59:49.51
Angular distance between the image centers 0.0051 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits (2nd new image)
verification OK: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Image size: 938.8'x624.3' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.88"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 08:53:20.610 +13:59:42.48 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 08:53:21.014 +14:00:00.07
Second-epoch image center 08:53:20.610 +13:59:42.48
Angular distance between the image centers 0.0052 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 08:53:19.979 +13:59:49.51
Second-epoch second image center 08:53:20.610 +13:59:42.48
Angular distance between the image centers 0.00321 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits &> /tmp/tmp.ITmLpxdPOJ
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits &> /tmp/tmp.4V3BhTGmOB
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits &> /tmp/tmp.IPfDrA4mEO
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits &> /tmp/tmp.lzLYeavbm6
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Calibrating the magnitude scale
Found non-empty wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits and wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits and wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
Found non-empty wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits and wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
The reference image (wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits) and catalog (wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat) found
'wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat' -> 'wcsmag.cat'
Read 12501 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 125.0576 to 141.9546 deg, Dec +8.1318 to +19.6232 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 125.0576 to 141.9546 deg, Dec 8.1318 to 19.6232 deg
Loaded 7593 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5630 out of 5966 total matches.
Matched with Tycho-2 5966 out of 12501 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.977100
a=0.000000 b=1.000000 c=22.977100
From vast_summary.log: estimated ref. image limiting mag.: -7.34
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.64
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.64
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 12501 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 125.0576 to 141.9546 deg, Dec +8.1318 to +19.6232 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 125.0576 to 141.9546 deg, Dec 8.1318 to 19.6232 deg
Loaded 7593 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5630 out of 5966 total matches.
Matched with Tycho-2 5966 out of 12501 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Forced-photometry filter: calibrated wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits -> calib.txt_param_ref_wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits (aperture=6.5)
Read 9951 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 125.0604 to 141.9546 deg, Dec +8.1147 to +19.5889 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 125.0604 to 141.9546 deg, Dec 8.1147 to 19.5889 deg
Loaded 7587 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5641 out of 5951 total matches.
Matched with Tycho-2 5951 out of 9951 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
Forced-photometry filter: calibrated wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits -> calib.txt_param_ref_wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits (aperture=6.4)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 2 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.4 pix Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
2.2 pix Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
2.4 pix fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
2.4 pix fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Limiting magnitude estimates:
15.6 mag. Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
15.4 mag. Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
14.8 mag. fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
14.8 mag. fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
All-image limiting magnitude estimate: 14.8 (SNR ) 11.7 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
cp: cannot create regular file 'local_wcs_cache/': Not a directory
############ /tmp/tmp.ITmLpxdPOJ (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits 566.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits' -> 'wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
WCS_IMAGE_NAME=wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
WCS-calibrated image found: wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Checking if the catalog wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat corresponding to the image wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits alredy exist and is non-empty...
Catalog wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat corresponding to the image wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
WCS catalog name: wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=855, bad_region=3640, passed=12501
Got 12501 stars (including 8254 good ones) from the SExtractor catalog wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
util/solve_plate_with_UCAC5 got 12501 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.7'
Seting catalog search parameters based on the expected field of view 937.7 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013024 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010419 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.1 to 19.6)
Done reading UCAC5 zone files...
Matched 4877 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4868 matched stars entering correct_measured_positions(), 4868 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4868 matched stars entering correct_measured_positions(), 9591 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.1 to 19.6)
Done reading UCAC5 zone files...
Matched 4877 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4868 matched stars entering correct_measured_positions(), 9591 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Accuracy estimation diagnostic: 4868 matched stars entering correct_measured_positions(), 9591 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Excluding outliers - 4868 stars left (next iteration limit 5354)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits N_match=4868 sigma_overall_arcsec=0.318 sigma_q1_arcsec=0.279 sigma_q2_arcsec=0.355 sigma_q3_arcsec=0.335 sigma_q4_arcsec=0.323 n_q1=1409 n_q2=1070 n_q3=1301 n_q4=1088 worst_quadrant_to_overall_ratio=1.119
WCS_HEADER_DIAG: file=Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits selection=current_pairs N_selected=4868 N_valid=4868 bias_ra_arcsec=-0.032 bias_dec_arcsec=-0.014 median_sep_arcsec=0.269 p95_sep_arcsec=0.976 n_q1=1409 n_q2=1070 n_q3=1301 n_q4=1088 occupied_cells_4x4=16/16
The image catalog is written to wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits -region wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.4V3BhTGmOB (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits' -> 'wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
WCS_IMAGE_NAME=wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
WCS-calibrated image found: wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
Checking if the catalog wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat corresponding to the image wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits alredy exist and is non-empty...
Catalog wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat corresponding to the image wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
WCS catalog name: wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=759, bad_region=2628, passed=9951
Got 9951 stars (including 6771 good ones) from the SExtractor catalog wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat
util/solve_plate_with_UCAC5 got 9951 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.6'
Seting catalog search parameters based on the expected field of view 941.6 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013078 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010462 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.1 to 19.6)
Done reading UCAC5 zone files...
Matched 4874 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4862 matched stars entering correct_measured_positions(), 4862 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4862 matched stars entering correct_measured_positions(), 7875 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.1 to 19.6)
Done reading UCAC5 zone files...
Matched 4874 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4861 matched stars entering correct_measured_positions(), 7875 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Accuracy estimation diagnostic: 4861 matched stars entering correct_measured_positions(), 7875 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Excluding outliers - 4861 stars left (next iteration limit 5348)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits N_match=4861 sigma_overall_arcsec=0.352 sigma_q1_arcsec=0.371 sigma_q2_arcsec=0.429 sigma_q3_arcsec=0.307 sigma_q4_arcsec=0.312 n_q1=1383 n_q2=1001 n_q3=1399 n_q4=1078 worst_quadrant_to_overall_ratio=1.218
WCS_HEADER_DIAG: file=Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits selection=current_pairs N_selected=4861 N_valid=4861 bias_ra_arcsec=0.014 bias_dec_arcsec=-0.004 median_sep_arcsec=0.291 p95_sep_arcsec=0.873 n_q1=1383 n_q2=1001 n_q3=1399 n_q4=1078 occupied_cells_4x4=16/16
The image catalog is written to wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits -region wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.IPfDrA4mEO (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
WCS-calibrated image found: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
Checking if the catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat corresponding to the image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat corresponding to the image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
WCS catalog name: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=398, bad_region=1067, passed=6822
Got 6822 stars (including 5398 good ones) from the SExtractor catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat
util/solve_plate_with_UCAC5 got 6822 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 938.8'
Seting catalog search parameters based on the expected field of view 938.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013039 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010431 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.6 to 19.3)
Done reading UCAC5 zone files...
Matched 4890 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4879 matched stars entering correct_measured_positions(), 4879 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.34"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4879 matched stars entering correct_measured_positions(), 5956 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.6 to 19.3)
Done reading UCAC5 zone files...
Matched 4891 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4881 matched stars entering correct_measured_positions(), 5956 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Accuracy estimation diagnostic: 4881 matched stars entering correct_measured_positions(), 5956 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Excluding outliers - 4881 stars left (next iteration limit 5366)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=4881 robust_rms=7.014 arcsec worst_region_rms=10.413 arcsec outer_annulus_rms=10.413 arcsec
SIP_REFIT: SIP order 3 trial: matched=4881 robust_rms=0.526 arcsec worst_region_rms=0.729 arcsec outer_annulus_rms=0.729 arcsec
SIP_REFIT: SIP order 5 trial: matched=4881 robust_rms=0.426 arcsec worst_region_rms=0.565 arcsec outer_annulus_rms=0.565 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4881 robust_rms_before=0.975 arcsec robust_rms_before_corrected=0.358 arcsec robust_rms_after=0.426 arcsec worst_region_rms_before=0.583 worst_region_rms_after=0.565 outer_annulus_rms_before=1.123 outer_annulus_rms_after=0.565
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.583 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits worst_region_rms_kept=0.583 arcsec robust_rms_kept=0.358 arcsec matched=4881
WCS_QUALITY_DIAG: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits N_match=4881 sigma_overall_arcsec=0.366 sigma_q1_arcsec=0.407 sigma_q2_arcsec=0.352 sigma_q3_arcsec=0.343 sigma_q4_arcsec=0.371 n_q1=1849 n_q2=646 n_q3=1694 n_q4=692 worst_quadrant_to_overall_ratio=1.112
WCS_HEADER_DIAG: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits selection=current_pairs N_selected=4881 N_valid=4881 bias_ra_arcsec=0.427 bias_dec_arcsec=0.586 median_sep_arcsec=0.930 p95_sep_arcsec=1.671 n_q1=1849 n_q2=646 n_q3=1694 n_q4=692 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits -region wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.lzLYeavbm6 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
WCS-calibrated image found: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Checking if the catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat corresponding to the image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat corresponding to the image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
WCS catalog name: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=421, bad_region=1087, passed=6747
Got 6747 stars (including 5281 good ones) from the SExtractor catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat
util/solve_plate_with_UCAC5 got 6747 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 938.8'
Seting catalog search parameters based on the expected field of view 938.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013039 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010431 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.6 to 19.3)
Done reading UCAC5 zone files...
Matched 4889 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4881 matched stars entering correct_measured_positions(), 4881 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4881 matched stars entering correct_measured_positions(), 5868 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.6 to 19.3)
Done reading UCAC5 zone files...
Matched 4890 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4882 matched stars entering correct_measured_positions(), 5868 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Accuracy estimation diagnostic: 4882 matched stars entering correct_measured_positions(), 5868 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Excluding outliers - 4882 stars left (next iteration limit 5369)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=4882 robust_rms=7.038 arcsec worst_region_rms=10.288 arcsec outer_annulus_rms=10.288 arcsec
SIP_REFIT: SIP order 3 trial: matched=4882 robust_rms=0.505 arcsec worst_region_rms=0.755 arcsec outer_annulus_rms=0.755 arcsec
SIP_REFIT: SIP order 5 trial: matched=4882 robust_rms=0.412 arcsec worst_region_rms=0.583 arcsec outer_annulus_rms=0.583 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4882 robust_rms_before=0.983 arcsec robust_rms_before_corrected=0.364 arcsec robust_rms_after=0.412 arcsec worst_region_rms_before=0.606 worst_region_rms_after=0.583 outer_annulus_rms_before=1.153 outer_annulus_rms_after=0.583
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.606 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits worst_region_rms_kept=0.606 arcsec robust_rms_kept=0.364 arcsec matched=4882
WCS_QUALITY_DIAG: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits N_match=4882 sigma_overall_arcsec=0.368 sigma_q1_arcsec=0.405 sigma_q2_arcsec=0.351 sigma_q3_arcsec=0.356 sigma_q4_arcsec=0.375 n_q1=1855 n_q2=646 n_q3=1686 n_q4=695 worst_quadrant_to_overall_ratio=1.101
WCS_HEADER_DIAG: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits selection=current_pairs N_selected=4882 N_valid=4882 bias_ra_arcsec=0.428 bias_dec_arcsec=0.607 median_sep_arcsec=0.918 p95_sep_arcsec=1.738 n_q1=1855 n_q2=646 n_q3=1686 n_q4=695 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits -region wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
Saving the final (post-refit) wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits to local_wcs_cache/
'wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits' -> 'local_wcs_cache/wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits'
Saving the final (post-refit) wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits to local_wcs_cache/
'wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits' -> 'local_wcs_cache/wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits'
Saving the final (post-refit) wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits to local_wcs_cache/
'wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits' -> 'local_wcs_cache/wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits'
Saving the final (post-refit) wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits to local_wcs_cache/
'wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits' -> 'local_wcs_cache/wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits'
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits sigma_overall=0.318 worst_q_ratio=1.119
ref2=Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits sigma_overall=0.352 worst_q_ratio=1.218
new1=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits sigma_overall=0.366 worst_q_ratio=1.112
new2=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits sigma_overall=0.368 worst_q_ratio=1.101
reference average sigma_overall=0.335 worst_q_ratio=1.1685
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187_astrometric_residuals.png (4868 matched stars from wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.28 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114_astrometric_residuals.png (4861 matched stars from wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.31 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446_astrometric_residuals.png (4881 matched stars from wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.32 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447_astrometric_residuals.png (4882 matched stars from wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.33 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits'
Saving fully-calibrated image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits'
Preparing the HTML report for the field Cnc-05-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
Another copy of lib/update_offline_catalogs.sh is updating the catalogs right now - not downloading anything in this run
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 09:04:18.40 +17:00:23.6: 16.07 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 09:04:18.40 +17:00:23.6: 15.80 +/- 99.00 upperlimit
Adding exclusion_list_local.txt__out20834.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 60s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 1s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20834_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
Preparing report for the candidate 20834_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 21405_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 21405_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 09:01:03.29 +17:53:56.7 in the exclusion list exclusion_list.txt ****
make_report_in_HTML.sh Phase 2 (HTML assembly): 0s
make_report_in_HTML.sh TOTAL: 61s
Prepared the HTML report for the field Cnc-05-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
09:04:18.40 +17:00:23.6
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
SExtractor catalog cache: saved Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.cat to cache
SExtractor catalog cache: saved Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Creating symlink local_wcs_cache/wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
Creating symlink local_wcs_cache/wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
Creating symlink local_wcs_cache/wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits exists and is non-empty
wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits exists and is non-empty
wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits exists and is non-empty
wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits (1st reference image)
verification OK: wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Image size: 937.7'x624.9' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.88"/pix along the X axis and 5.87"/pix along the Y axis
Image center: 08:53:21.014 +14:00:00.07 J2000 4789.000 3195.000
###################################
The image scale is 5.88"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits (1st new image)
verification OK: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
Image size: 938.8'x624.3' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.88"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 08:53:19.979 +13:59:49.51 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 08:53:21.014 +14:00:00.07
Second-epoch image center 08:53:19.979 +13:59:49.51
Angular distance between the image centers 0.0051 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits (2nd new image)
verification OK: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Image size: 938.8'x624.3' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.88"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 08:53:20.610 +13:59:42.48 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 08:53:21.014 +14:00:00.07
Second-epoch image center 08:53:20.610 +13:59:42.48
Angular distance between the image centers 0.0052 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 08:53:19.979 +13:59:49.51
Second-epoch second image center 08:53:20.610 +13:59:42.48
Angular distance between the image centers 0.00321 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits &> /tmp/tmp.TUR3EOetGY
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits &> /tmp/tmp.GHvXG6629K
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits &> /tmp/tmp.ecPpXYcU2l
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits &> /tmp/tmp.konwnvYe0u
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Calibrating the magnitude scale
Found non-empty wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits and wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits and wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
Found non-empty wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits and wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
The reference image (wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits) and catalog (wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat) found
'wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat' -> 'wcsmag.cat'
Read 63179 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 125.0577 to 141.9546 deg, Dec +8.1206 to +19.6320 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 125.0577 to 141.9546 deg, Dec 8.1206 to 19.6320 deg
Loaded 7608 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5179 out of 5984 total matches.
Matched with Tycho-2 5984 out of 63179 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.858100
a=0.000000 b=1.000000 c=22.858100
From vast_summary.log: estimated ref. image limiting mag.: -7.04
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.82
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.82
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 63179 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 125.0577 to 141.9546 deg, Dec +8.1206 to +19.6320 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 125.0577 to 141.9546 deg, Dec 8.1206 to 19.6320 deg
Loaded 7608 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5179 out of 5984 total matches.
Matched with Tycho-2 5984 out of 63179 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Forced-photometry filter: calibrated wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits -> calib.txt_param_ref_wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits (aperture=5.1)
Read 59553 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 125.0604 to 141.9546 deg, Dec +8.1147 to +19.5889 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 125.0604 to 141.9546 deg, Dec 8.1147 to 19.5889 deg
Loaded 7587 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5243 out of 6043 total matches.
Matched with Tycho-2 6043 out of 59553 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
Forced-photometry filter: calibrated wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits -> calib.txt_param_ref_wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits (aperture=4.8)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 135 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.3 pix Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
2.0 pix Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
2.4 pix fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
2.3 pix fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Limiting magnitude estimates:
15.8 mag. Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
15.6 mag. Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
14.8 mag. fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
14.8 mag. fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
All-image limiting magnitude estimate: 14.8 (SNR ) 14.1 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.TUR3EOetGY (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits 566.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits' -> 'wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
WCS_IMAGE_NAME=wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
WCS-calibrated image found: wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
Checking if the catalog wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat corresponding to the image wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits alredy exist and is non-empty...
Catalog wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat corresponding to the image wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits
WCS catalog name: wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=23, blended=4250, bad_region=14474, passed=63156
Got 63156 stars (including 45591 good ones) from the SExtractor catalog wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat
util/solve_plate_with_UCAC5 got 63156 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.7'
Seting catalog search parameters based on the expected field of view 937.7 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013024 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010419 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.1 to 19.6)
Done reading UCAC5 zone files...
Matched 4878 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4873 matched stars entering correct_measured_positions(), 4873 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4873 matched stars entering correct_measured_positions(), 52207 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.1 to 19.6)
Done reading UCAC5 zone files...
Matched 4878 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4873 matched stars entering correct_measured_positions(), 52207 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Accuracy estimation diagnostic: 4873 matched stars entering correct_measured_positions(), 52207 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Excluding outliers - 4873 stars left (next iteration limit 5360)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits N_match=4873 sigma_overall_arcsec=0.308 sigma_q1_arcsec=0.271 sigma_q2_arcsec=0.342 sigma_q3_arcsec=0.335 sigma_q4_arcsec=0.300 n_q1=1451 n_q2=1071 n_q3=1301 n_q4=1050 worst_quadrant_to_overall_ratio=1.111
WCS_HEADER_DIAG: file=Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits selection=current_pairs N_selected=4873 N_valid=4873 bias_ra_arcsec=-0.041 bias_dec_arcsec=-0.002 median_sep_arcsec=0.262 p95_sep_arcsec=0.954 n_q1=1451 n_q2=1071 n_q3=1301 n_q4=1050 occupied_cells_4x4=16/16
The image catalog is written to wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits -region wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.GHvXG6629K (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits' -> 'wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
WCS_IMAGE_NAME=wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
WCS-calibrated image found: wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
Checking if the catalog wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat corresponding to the image wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits alredy exist and is non-empty...
Catalog wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat corresponding to the image wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits
WCS catalog name: wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=22, blended=3477, bad_region=15002, passed=59531
Got 59531 stars (including 41920 good ones) from the SExtractor catalog wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat
util/solve_plate_with_UCAC5 got 59531 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.6'
Seting catalog search parameters based on the expected field of view 941.6 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013078 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010462 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.1 to 19.6)
Done reading UCAC5 zone files...
Matched 4864 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 4855 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 47769 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.1 to 19.6)
Done reading UCAC5 zone files...
Matched 4862 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4854 matched stars entering correct_measured_positions(), 47769 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Accuracy estimation diagnostic: 4854 matched stars entering correct_measured_positions(), 47769 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Excluding outliers - 4854 stars left (next iteration limit 5340)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits N_match=4854 sigma_overall_arcsec=0.331 sigma_q1_arcsec=0.356 sigma_q2_arcsec=0.408 sigma_q3_arcsec=0.295 sigma_q4_arcsec=0.291 n_q1=1398 n_q2=979 n_q3=1412 n_q4=1065 worst_quadrant_to_overall_ratio=1.230
WCS_HEADER_DIAG: file=Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits selection=current_pairs N_selected=4854 N_valid=4854 bias_ra_arcsec=-0.018 bias_dec_arcsec=0.005 median_sep_arcsec=0.280 p95_sep_arcsec=0.849 n_q1=1398 n_q2=979 n_q3=1412 n_q4=1065 occupied_cells_4x4=16/16
The image catalog is written to wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits -region wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.ecPpXYcU2l (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
WCS-calibrated image found: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
Checking if the catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat corresponding to the image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat corresponding to the image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
WCS catalog name: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=7, blended=1596, bad_region=4086, passed=36827
Got 36827 stars (including 31330 good ones) from the SExtractor catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat
util/solve_plate_with_UCAC5 got 36827 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 938.8'
Seting catalog search parameters based on the expected field of view 938.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013039 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010431 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 4874 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4866 matched stars entering correct_measured_positions(), 4866 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4866 matched stars entering correct_measured_positions(), 33723 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 4874 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4865 matched stars entering correct_measured_positions(), 33723 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Accuracy estimation diagnostic: 4865 matched stars entering correct_measured_positions(), 33722 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Excluding outliers - 4865 stars left (next iteration limit 5352)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: SIP order 2 trial: matched=4865 robust_rms=7.021 arcsec worst_region_rms=10.390 arcsec outer_annulus_rms=10.390 arcsec
SIP_REFIT: SIP order 3 trial: matched=4865 robust_rms=0.526 arcsec worst_region_rms=0.727 arcsec outer_annulus_rms=0.727 arcsec
SIP_REFIT: SIP order 5 trial: matched=4865 robust_rms=0.427 arcsec worst_region_rms=0.570 arcsec outer_annulus_rms=0.570 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4865 robust_rms_before=0.977 arcsec robust_rms_before_corrected=0.360 arcsec robust_rms_after=0.427 arcsec worst_region_rms_before=0.597 worst_region_rms_after=0.570 outer_annulus_rms_before=1.104 outer_annulus_rms_after=0.570
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.597 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits worst_region_rms_kept=0.597 arcsec robust_rms_kept=0.360 arcsec matched=4865
WCS_QUALITY_DIAG: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits N_match=4865 sigma_overall_arcsec=0.363 sigma_q1_arcsec=0.411 sigma_q2_arcsec=0.338 sigma_q3_arcsec=0.350 sigma_q4_arcsec=0.376 n_q1=1822 n_q2=633 n_q3=1706 n_q4=704 worst_quadrant_to_overall_ratio=1.133
WCS_HEADER_DIAG: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits selection=current_pairs N_selected=4865 N_valid=4865 bias_ra_arcsec=0.423 bias_dec_arcsec=0.583 median_sep_arcsec=0.929 p95_sep_arcsec=1.659 n_q1=1822 n_q2=633 n_q3=1706 n_q4=704 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits -region wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
############ /tmp/tmp.konwnvYe0u (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
WCS-calibrated image found: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Checking if the catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat corresponding to the image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat corresponding to the image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
WCS catalog name: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=1, no_mag_err=0, low_SNR=6, blended=1675, bad_region=4143, passed=37628
Got 37628 stars (including 32020 good ones) from the SExtractor catalog wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat
util/solve_plate_with_UCAC5 got 37628 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 938.8'
Seting catalog search parameters based on the expected field of view 938.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013039 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010431 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 4874 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4867 matched stars entering correct_measured_positions(), 4867 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.34"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4867 matched stars entering correct_measured_positions(), 34475 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.34"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 4874 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4867 matched stars entering correct_measured_positions(), 34475 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.34"
Accuracy estimation diagnostic: 4867 matched stars entering correct_measured_positions(), 34475 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Excluding outliers - 4867 stars left (next iteration limit 5353)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions
SIP_REFIT: SIP order 2 trial: matched=4867 robust_rms=6.927 arcsec worst_region_rms=10.280 arcsec outer_annulus_rms=10.263 arcsec
SIP_REFIT: SIP order 3 trial: matched=4867 robust_rms=0.508 arcsec worst_region_rms=0.760 arcsec outer_annulus_rms=0.760 arcsec
SIP_REFIT: SIP order 5 trial: matched=4867 robust_rms=0.412 arcsec worst_region_rms=0.584 arcsec outer_annulus_rms=0.584 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4867 robust_rms_before=0.985 arcsec robust_rms_before_corrected=0.361 arcsec robust_rms_after=0.412 arcsec worst_region_rms_before=0.604 worst_region_rms_after=0.584 outer_annulus_rms_before=1.163 outer_annulus_rms_after=0.584
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-region baseline 0.604 arcsec) - keeping the original
SIP_REFIT_REJECTED: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits worst_region_rms_kept=0.604 arcsec robust_rms_kept=0.361 arcsec matched=4867
WCS_QUALITY_DIAG: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits N_match=4867 sigma_overall_arcsec=0.363 sigma_q1_arcsec=0.402 sigma_q2_arcsec=0.338 sigma_q3_arcsec=0.357 sigma_q4_arcsec=0.365 n_q1=1825 n_q2=620 n_q3=1717 n_q4=705 worst_quadrant_to_overall_ratio=1.106
WCS_HEADER_DIAG: file=fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits selection=current_pairs N_selected=4867 N_valid=4867 bias_ra_arcsec=0.434 bias_dec_arcsec=0.603 median_sep_arcsec=0.923 p95_sep_arcsec=1.725 n_q1=1825 n_q2=620 n_q3=1717 n_q4=705 occupied_cells_4x4=16/16
The image catalog is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits -region wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-09_20.00sec_-0.00C_LIGHT_0446.fits
Saving fully-calibrated image wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-11-03_CI_Cnc-05-Q2b1x1_024619_TTUQ2b1x1_1252994_SRI7txBw/wcs_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447.fits
Preparing the HTML report for the field Cnc-05-Q2b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 08:56:27.73 +18:16:15.7: 13.64 +/- 0.04 detection
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 09:01:29.16 +11:19:25.3: 13.31 +/- 0.03 detection
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 08:55:27.17 +13:11:33.7: 16.22 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 09:01:29.16 +11:19:25.3: 13.26 +/- 0.03 detection
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 08:56:27.73 +18:16:15.7: 13.59 +/- 0.04 detection
Forced photometry reference-image weighted average: 13.29 +/- 0.02
Forced photometry reference-image weighted average: 13.61 +/- 0.03
Forced photometry filter REJECTED candidate at 09:01:29.16 +11:19:25.3: ref_mag=13.29 +/- 0.02 new_mean_mag=13.4791 delta=-0.19 (need > 0.90)
Forced photometry filter REJECTED candidate at 08:56:27.73 +18:16:15.7: ref_mag=13.61 +/- 0.03 new_mean_mag=13.6972 delta=-0.08 (need > 0.90)
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 08:55:27.17 +13:11:33.7: 16.09 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 08:47:33.85 +10:39:19.6: 13.20 +/- 0.03 detection
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 08:47:33.85 +10:39:19.6: 13.21 +/- 0.03 detection
Forced photometry reference-image weighted average: 13.20 +/- 0.02
Forced photometry filter REJECTED candidate at 08:47:33.85 +10:39:19.6: ref_mag=13.20 +/- 0.02 new_mean_mag=13.2155 delta=-0.01 (need > 0.90)
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 09:04:39.18 +10:51:49.9: 13.22 +/- 0.03 detection
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 09:04:39.18 +10:51:49.9: 13.34 +/- 0.04 detection
Forced photometry reference-image weighted average: 13.26 +/- 0.02
Forced photometry filter REJECTED candidate at 09:04:39.18 +10:51:49.9: ref_mag=13.26 +/- 0.02 new_mean_mag=13.6261 delta=-0.37 (need > 0.90)
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 08:35:31.09 +16:25:42.1: 16.09 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 08:35:31.09 +16:25:42.1: 15.94 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-02-21_23-50-23_20.00sec_-15.00C_LIGHT_0187.fits at 08:42:12.71 +13:22:23.4: 14.83 +/- 0.12 detection
Forced photometry on wcs_Cnc-05-Q2b1x1_2026-04-15_23-32-43_20.00sec_-4.90C_LIGHTs_0114.fits at 08:42:12.71 +13:22:23.4: 14.94 +/- 0.15 detection
Forced photometry reference-image weighted average: 14.87 +/- 0.09
Forced photometry filter KEPT candidate at 08:42:12.71 +13:22:23.4: ref_mag=14.87 +/- 0.09 new_mean_mag=12.9415 delta=1.93 (need > 0.90)
Adding exclusion_list_local.txt__out35712.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out78572.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out84010.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 36s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 3s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 75319_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 75319_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 08:48:14.10 +11:33:32.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 75322_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 75322_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 75323_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 75323_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 75324_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 75324_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 75976_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 75976_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.4") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76011_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 76011_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 09:04:18.40 +17:00:23.6 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76070_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 76070_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76151_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 76151_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76441_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 76441_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76796_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 76796_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77153_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 77153_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77357_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 77357_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77361_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 77361_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77610_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 77610_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77654_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 77654_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77809_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 77809_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77986_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 77986_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (9.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78042_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78042_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (9.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78158_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78158_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78324_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78324_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78342_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78342_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78392_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78392_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78570_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78570_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.4") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78572_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
Preparing report for the candidate 78572_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78648_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78648_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78666_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78666_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78725_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78725_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78739_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78739_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 08:44:39.98 +10:06:15.9 in the exclusion list exclusion_list_bsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78806_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78806_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 78966_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 78966_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79021_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79021_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79193_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79193_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79260_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79260_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79446_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79446_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79457_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79457_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79548_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79548_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 08:49:32.75 +12:08:58.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79550_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79550_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79597_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79597_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79629_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79629_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79719_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79719_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79721_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79721_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79746_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79746_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79806_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79806_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79831_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79831_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79894_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79894_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79903_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79903_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 79919_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 79919_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 80098_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 80098_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 80109_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 80109_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 80187_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 80187_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 80326_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 80326_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 80596_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 80596_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 80764_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 80764_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 08:43:08.90 +14:05:37.5 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81120_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81120_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81125_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81125_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81223_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81223_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81402_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81402_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81413_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81413_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81425_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81425_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81725_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81725_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81733_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81733_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81742_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81742_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81837_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81837_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81875_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81875_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 81904_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 81904_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 82039_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 82039_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 82051_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 82051_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 08:49:56.34 +14:48:29.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 82098_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 82098_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 82208_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 82208_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 82288_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 82288_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.4") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 82375_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 82375_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 82556_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 82556_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 82862_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 82862_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 08:42:55.50 +14:05:54.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83009_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83009_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83013_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83013_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83274_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83274_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83337_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83337_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83356_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83356_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.4") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83390_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83390_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83391_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83391_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83409_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83409_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83412_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83412_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83531_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83531_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.4") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83553_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83553_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 08:52:29.94 +18:02:48.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83558_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83558_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (9.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83574_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83574_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 09:05:14.03 +14:15:43.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83605_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83605_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83620_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83620_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83644_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83644_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83645_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83645_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83651_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83651_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83671_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83671_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83702_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83702_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83812_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83812_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 08:45:55.10 +11:26:05.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83818_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83818_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83865_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83865_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 83982_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 83982_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84010_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
Preparing report for the candidate 84010_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84071_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84071_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84082_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84082_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84143_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84143_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.9") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84379_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84379_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84390_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84390_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84484_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84484_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84516_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84516_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84537_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84537_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84569_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84569_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84698_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84698_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84741_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84741_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84824_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84824_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84900_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84900_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 84906_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 84906_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85023_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85023_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.4") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85039_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85039_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85150_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85150_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85262_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85262_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85310_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85310_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85500_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85500_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85513_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85513_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85523_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85523_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (10.4") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85562_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85562_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.1") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85588_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85588_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.7") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85734_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85734_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.3") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85738_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85738_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85799_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85799_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85854_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85854_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85942_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85942_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (9.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85957_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85957_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.6") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85963_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85963_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (11.5") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 85970_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 85970_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (13.8") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 50284_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 50284_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 09:09:51.97 +09:48:19.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 06362_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 06362_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
**** FOUND 09:01:03.28 +17:53:56.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 42130_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 42130_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks
Rejecting candidate due to large distance (12.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 35712_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
Preparing report for the candidate 35712_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 49554_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447
The candidate 49554_fd_Cnc-05-Q2b1x1_2026-11-03_01-56-47_20.00sec_0.00C_LIGHT_0447 did not pass the final checks