NMW transient search results

This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU

The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.

Processing fields Cet-11-Q2b1x1

Processing complete!

Total number of candidates identified: 0

FITS images used in this processing run:

Field Cet-11-Q2b1x1 reference image: Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits
Field Cet-11-Q2b1x1 reference image: Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits
Field Cet-11-Q2b1x1 second-epoch image: Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits
Field Cet-11-Q2b1x1 second-epoch image: Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits

Processing log:

Filtering log:

######## Processing parameters ########
AAVSO_COMMENT_STRING= NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
ASTCHECK_ASTEROID_SEARCH_RADIUS_ARCSEC= 
BAD_REGION_FILE= /var/www/nmw_calibration/TTUQ2b1x1/TTUQ2_bad_region.lst
CAMERA_SETTINGS= TTUQ2b1x1
CHECK_POINTING_ACCURACY= yes
DARK_FRAMES_DIR_OR_FILE= /var/www/nmw_calibration/TTUQ2b1x1/darks
EXCLUSION_LIST= ../exclusion_list_TTUQ2.txt
FILTER_BAD_IMG__MAX_APERTURE_STAR_SIZE_PIX= 12.5
FILTER_BAD_IMG__MAX_ELONGATION_AminusB_PIX= 0.55
FILTER_BAD_IMG__MIN_APERTURE_STAR_SIZE_PIX= 2.0
FILTER_BRIGHT_MAG_CUTOFF_TRANSIENT_SEARCH= -5
FILTER_FAINT_MAG_CUTOFF_TRANSIENT_SEARCH= 15.5
FLAT_FIELD_DIR_OR_FILE= /var/www/nmw_calibration/TTUQ2b1x1/flats
FRAME_EDGE_OFFSET_PIX= 600
GAIA_BAND_FOR_CATALOGED_SOURCE_CHECK= 
MAX_NEW_TO_REF_MEAN_IMG_VALUE_RATIO= 100
DISABLE_NEW_TO_REF_MEAN_IMG_RATIO_CHECK= yes
MAX_NEW_IMG_MEAN_VALUE= 25000
MAX_SD_RATIO_OF_SECOND_EPOCH_IMGS= 0.18
MAX_SD_RATIO_OF_SECOND_EPOCH_IMGS_SOFT_LIMIT= 0.12
MPC_CODE= V36
NMW_CALIBRATION= /var/www/nmw_calibration
NUMBER_OF_DETECTED_TRANSIENTS_BEFORE_FILTERING_HARD_LIMIT= 10000
NUMBER_OF_DETECTED_TRANSIENTS_BEFORE_FILTERING_SOFT_LIMIT= 8000
OMP_NUM_THREADS= 3
ONLINE_MPCHECKER_BUTTON_ASTEROID_SEARCH_RADIUS_ARCMIN= 
PHOTOMETRIC_CALIBRATION= 
REQUIRE_PIX_SHIFT_BETWEEN_IMAGES_FOR_TRANSIENT_CANDIDATES= yes
SEXTRACTOR_CONFIG_BRIGHTSTARPASS= default.sex.telephoto_lens_onlybrightstars_v1
SEXTRACTOR_CONFIG_FILES= default.sex.telephoto_lens_onlybrightstars_v1 default.sex.telephoto_lens_vSTL
STARMATCH_RADIUS_PIX= 5
SYSREM_ITERATIONS= 0
TELESCOP= 
TELESCOP_NAME_KNOWN_TO_VaST_FOR_FOV_DETERMINATION= 
UCAC5_PLATESOLVE_ITERATIONS= 2
FPACK_FULLY_CALIBRATED_IMAGE= no
#######################################
HOSTNAME= tau
USER= 
HOME= 
#######################################
SExtractor catalog cache: enabled, directory /data_ssd/NMW-TexasTech/vast_sextractor_cache
Reference image directory is set to /data_ssd/NMW-TexasTech/reference_imgs
VIZIER_SITE=vizier.cds.unistra.fr
GAIA_DR2_CLIENT=vizquery (lib/vizquery -> VizieR vizier.cds.unistra.fr)
INFO: MAKE_PNG_PLOTS is set to yes
FITS_FILE_EXT=fits
CALIBRATION_STATUS_PREFIX=
Fields in the data directory: 
Cet-11-Q2b1x1
#######################################
########### Starting Cet-11-Q2b1x1 ###########
Processing Cet-11-Q2b1x1
WARNING: server tau is low on disk space, only 94579 MB free at /data_ssd/NMW-TexasTech/workdir
WARNING: server tau is low on disk space, only 94579 MB free at .
Checking input images (2 new)
REFERENCE_EPOCH__FIRST_IMAGE= /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits
REFERENCE_EPOCH__SECOND_IMAGE= /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits
Small preview (one of the new images): 
Large previews of the second-epoch (new) images:
MAKE_PNG_PLOTS=yes
renamed 'Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.png' -> 'transient_report/Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits_preview.png'
Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits

renamed 'Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.png' -> 'transient_report/Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits_preview.png'
Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits


Read-check the input FITS images... read-check OK Blank image check the input FITS images... blank-image-check OK Read date check the input FITS images... read-date-check OK Mean value check the input FITS images... OK, at least two new images have mean values below the threshold. ---------------------------------------------- INFO: REFERENCE_EPOCH__FIRST_IMAGE_MEAN_VALUE= 1654.6390 INFO: REFERENCE_EPOCH__FIRST_IMAGE_SD= 511.5033 INFO: SECOND_EPOCH__FIRST_IMAGE_MEAN_VALUE= 2653.1983 INFO: SECOND_EPOCH__FIRST_IMAGE_SD= 590.1874 INFO: SECOND_EPOCH__SECOND_IMAGE_MEAN_VALUE= 2656.1723 INFO: SECOND_EPOCH__SECOND_IMAGE_SD= 590.3314 ---------------------------------------------- INFO: ref_to_second_epoch_img_mean_ratio= 1.60349 INFO: SECOND_EPOCH__SD_ratio= 0.000 INFO: the new-to-reference mean image value ratio check is disabled (DISABLE_NEW_TO_REF_MEAN_IMG_RATIO_CHECK=yes) - expected with a background-subtracted reference image ---------------------------------------------- Calibration settings: DARK_FRAMES_DIR_OR_FILE=/var/www/nmw_calibration/TTUQ2b1x1/darks FLAT_FIELD_DIR_OR_FILE=/var/www/nmw_calibration/TTUQ2b1x1/flats EXPTIME = 20.0 / [s] Exposure duration SET-TEMP= 0.0 / [degC] CCD temperature setpoint CCD-TEMP= -0.0 / [degC] CCD temperature FOCTEMP = 21.1900005340576 / [degC] Focuser temperature AMBTEMP = 26.1 / [degC] Ambient air temperature Exploring image header: /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits CCD-TEMP= -0.000000 for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits SET-TEMP= 0.000000 for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Header: 74 keys total, 33 keys left Record 0: "" status=0 Record 1: "SIMPLE = T / C# FITS" status=0 Record 2: "BITPIX = 16" status=0 Record 3: "NAXIS = 2 / Dimensionality" status=0 Record 4: "NAXIS1 = 9576" status=0 Record 5: "NAXIS2 = 6388" status=0 Record 6: "BZERO = 32768" status=0 Record 7: "EXTEND = T / Extensions are permitted" status=0 Record 8: "IMAGETYP= 'LIGHT' / Type of exposure" status=0 Record 9: "EXPOSURE= 20.0 / [s] Exposure duration" status=0 Record 10: "EXPTIME = 20.0 / [s] Exposure duration" status=0 Record 11: "DATE-LOC= '2026-09-03T05:12:43.1836985' / Time of observation (local)" status=0 Record 12: "DATE-OBS= '2026-09-03T10:12:43.1836985' / Time of observation (UTC)" status=0 Record 13: "MJD-OBS = 61286.4254998034 / Modified Julian Date of observation" status=0 Record 14: "DATE-AVG= '2026-09-03T10:12:53.0851938' / Averaged midpoint time (UTC)" status=0 Record 15: "MJD-AVG = 61286.4256144096 / Modified Julian Date of averaged midpoint" status=0 Record 16: "XBINNING= 1 / X axis binning factor" status=0 Record 17: "YBINNING= 1 / Y axis binning factor" status=0 Record 18: "GAIN = 30 / Sensor gain" status=0 Record 19: "OFFSET = 30 / Sensor gain offset" status=0 Record 20: "XPIXSZ = 3.76 / [um] Pixel X axis size" status=0 Record 21: "YPIXSZ = 3.76 / [um] Pixel Y axis size" status=0 Record 22: "INSTRUME= 'QHY600M' / Imaging instrument name" status=0 Record 23: "CAMERAID= 'QHY600M-84137c4dbbbd119a9' / Imaging instrument identifier" status=0 Record 24: "SET-TEMP= 0.0 / [degC] CCD temperature setpoint" status=0 Record 25: "CCD-TEMP= -0.0 / [degC] CCD temperature" status=0 Record 26: "READOUTM= '2CMS-0' / Sensor readout mode" status=0 Record 27: "USBLIMIT= 50 / Camera-specific USB setting" status=0 Record 28: "TELESCOP= 'QHY600M-TTU2' / Name of telescope" status=0 Record 29: "FOCALLEN= 135.0 / [mm] Focal length" status=0 Record 30: "FOCRATIO= 2.2 / Focal ratio" status=0 Record 31: "RA = 26.6650393222942 / [deg] RA of telescope" status=0 Record 32: "DEC = -17.9998423911208 / [deg] Declination of telescope" status=0 Record 33: "CENTALT = 37.9747222222222 / [deg] Altitude of telescope" status=0 Record 34: "CENTAZ = 188.313055555556 / [deg] Azimuth of telescope" status=0 Record 35: "AIRMASS = 1.6226340119443 / Airmass at frame center (Gueymard 1993)" status=0 Record 36: "PIERSIDE= 'East' / Telescope pointing state" status=0 Record 37: "SITEELEV= 1009.5 / [m] Observation site elevation" status=0 Record 38: "SITELAT = 33.7482925 / [deg] Observation site latitude" status=0 Record 39: "SITELONG= -101.958319 / [deg] Observation site longitude" status=0 Record 40: "OBSERVER= 'Sokolovsky' / Observer name" status=0 Record 41: "OBSERVAT= 'TTU Skyview' / Observatory name" status=0 Record 42: "SITENAME= '' / Observatory site name" status=0 Record 43: "FWHEEL = 'Simulator' / Filter Wheel name" status=0 Record 44: "FILTER = 'CV' / Active filter name" status=0 Record 45: "OBJECT = 'Cet-11' / Name of the object of interest" status=0 Record 46: "OBJCTRA = '01 46 40' / [H M S] RA of imaged object" status=0 Record 47: "OBJCTDEC= '-18 00 00' / [D M S] Declination of imaged object" status=0 Record 48: "OBJCTROT= 0.0 / [deg] planned rotation of imaged object" status=0 Record 49: "FOCNAME = 'ZWO Focuser' / Focusing equipment name" status=0 Record 50: "FOCPOS = 20467 / [step] Focuser position" status=0 Record 51: "FOCUSPOS= 20467 / [step] Focuser position" status=0 Record 52: "FOCUSSZ = 0.0 / [um] Focuser step size" status=0 Record 53: "FOCTEMP = 21.1900005340576 / [degC] Focuser temperature" status=0 Record 54: "FOCUSTEM= 21.1900005340576 / [degC] Focuser temperature" status=0 Record 55: "DEWPOINT= 10.7 / [degC] Dew point" status=0 Record 56: "HUMIDITY= 38.0 / [percent] Relative humidity" status=0 Record 57: "PRESSURE= 899.7 / [hPa] Air pressure" status=0 Record 58: "AMBTEMP = 26.1 / [degC] Ambient air temperature" status=0 Record 59: "WINDDIR = 6.0 / [deg] Wind direction: 0=N, 180=S, 90=E, 270=W" status=0 Record 60: "WINDGUST= 7.200576 / [kph] Wind gust" status=0 Record 61: "WINDSPD = 4.00032 / [kph] Wind speed" status=0 Record 62: "ROWORDER= 'TOP-DOWN' / FITS Image Orientation" status=0 Record 63: "EQUINOX = 2000.0 / Equinox of celestial coordinate system" status=0 Record 64: "SWCREATE= 'N.I.N.A. 3.2.0.9001 (x64)' / Software that created this file" status=0 Record 65: "QHY_EXP = 20.000096 / [s] Actual exposure time" status=0 Record 66: "QHY_PP = 13888.0 / [ps] pixelPeriod" status=0 Record 67: "QHY_LP = 85000.0 / [ns] linePeriod" status=0 Record 68: "GPS_LP = 85000.0 / [ns] linePeriod" status=0 Record 69: "QHY_FP = 20000160.0 / [us] framePeriod" status=0 Record 70: "QHY_CPL = 6120.0 / clocksPerLine" status=0 Record 71: "QHY_LPF = 235295.0 / linesPerFrame" status=0 Record 72: "QHY_AET = 20000096.0 / [us] actualExposureTime" status=0 Record 73: "QHY_LEM = T / isLongExposureMode" status=0 Record 74: "QHY_OFF0= 3767.777 / [us] RollingShutterEndOffset row 0" status=0 Allocating memory for image, dark and result arrays... Reading image /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits 9576 6388 16 bitpix SET-TEMP= 0.000000 for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits SET-TEMP= 0.000000 for /var/www/nmw_calibration/TTUQ2b1x1/darks/mdark_TTUQ2b1x1_0C_20s_2026-08-12_multinight.fit CCD-TEMP= -0.000000 for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits CCD-TEMP= -0.000000 for /var/www/nmw_calibration/TTUQ2b1x1/darks/mdark_TTUQ2b1x1_0C_20s_2026-08-12_multinight.fit Reading dark frame /var/www/nmw_calibration/TTUQ2b1x1/darks/mdark_TTUQ2b1x1_0C_20s_2026-08-12_multinight.fit 9576 6388 16 bitpix Dark frame is subtracted, output is written to /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/d_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits :) Spent 0.486090 seconds renamed 'mdark_TTUQ2b1x1_0C_20s_2026-08-12_multinight.png' -> 'transient_report/dark.png' try_to_calibrate_the_input_frame(): selected flat field /var/www/nmw_calibration/TTUQ2b1x1/flats/mff_TTUQ2b1x1_2026-08-12_multinight.fit from directory /var/www/nmw_calibration/TTUQ2b1x1/flats MegaDivider v7 Reading image /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/d_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits 9576 6388 16 bitpix Reading flat /var/www/nmw_calibration/TTUQ2b1x1/flats/mff_TTUQ2b1x1_2026-08-12_multinight.fit 9576 6388 16 bitpix Avarage count on flat field image: 37096.658242 Minimal real count (from overscan): 5 Output is written to /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits :) No overscan detected - all values seem high! (left_median=24199.0, right_median=29433.0) renamed 'mff_TTUQ2b1x1_2026-08-12_multinight.png' -> 'transient_report/flat.png' Using calibrated image CALIBRATED_SECOND_EPOCH__FIRST_IMAGE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits EXPTIME = 20.0 / [s] Exposure duration SET-TEMP= 0.0 / [degC] CCD temperature setpoint CCD-TEMP= 0.0 / [degC] CCD temperature FOCTEMP = 20.9899997711182 / [degC] Focuser temperature AMBTEMP = 26.1 / [degC] Ambient air temperature Exploring image header: /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits CCD-TEMP= 0.000000 for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits SET-TEMP= 0.000000 for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Header: 74 keys total, 33 keys left Record 0: "" status=0 Record 1: "SIMPLE = T / C# FITS" status=0 Record 2: "BITPIX = 16" status=0 Record 3: "NAXIS = 2 / Dimensionality" status=0 Record 4: "NAXIS1 = 9576" status=0 Record 5: "NAXIS2 = 6388" status=0 Record 6: "BZERO = 32768" status=0 Record 7: "EXTEND = T / Extensions are permitted" status=0 Record 8: "IMAGETYP= 'LIGHT' / Type of exposure" status=0 Record 9: "EXPOSURE= 20.0 / [s] Exposure duration" status=0 Record 10: "EXPTIME = 20.0 / [s] Exposure duration" status=0 Record 11: "DATE-LOC= '2026-09-03T05:13:35.4471965' / Time of observation (local)" status=0 Record 12: "DATE-OBS= '2026-09-03T10:13:35.4471965' / Time of observation (UTC)" status=0 Record 13: "MJD-OBS = 61286.4261047104 / Modified Julian Date of observation" status=0 Record 14: "DATE-AVG= '2026-09-03T10:13:45.3499731' / Averaged midpoint time (UTC)" status=0 Record 15: "MJD-AVG = 61286.4262193171 / Modified Julian Date of averaged midpoint" status=0 Record 16: "XBINNING= 1 / X axis binning factor" status=0 Record 17: "YBINNING= 1 / Y axis binning factor" status=0 Record 18: "GAIN = 30 / Sensor gain" status=0 Record 19: "OFFSET = 30 / Sensor gain offset" status=0 Record 20: "XPIXSZ = 3.76 / [um] Pixel X axis size" status=0 Record 21: "YPIXSZ = 3.76 / [um] Pixel Y axis size" status=0 Record 22: "INSTRUME= 'QHY600M' / Imaging instrument name" status=0 Record 23: "CAMERAID= 'QHY600M-84137c4dbbbd119a9' / Imaging instrument identifier" status=0 Record 24: "SET-TEMP= 0.0 / [degC] CCD temperature setpoint" status=0 Record 25: "CCD-TEMP= 0.0 / [degC] CCD temperature" status=0 Record 26: "READOUTM= '2CMS-0' / Sensor readout mode" status=0 Record 27: "USBLIMIT= 50 / Camera-specific USB setting" status=0 Record 28: "TELESCOP= 'QHY600M-TTU2' / Name of telescope" status=0 Record 29: "FOCALLEN= 135.0 / [mm] Focal length" status=0 Record 30: "FOCRATIO= 2.2 / Focal ratio" status=0 Record 31: "RA = 26.665039253429 / [deg] RA of telescope" status=0 Record 32: "DEC = -17.9998423945056 / [deg] Declination of telescope" status=0 Record 33: "CENTALT = 37.9483333333333 / [deg] Altitude of telescope" status=0 Record 34: "CENTAZ = 188.573055555556 / [deg] Azimuth of telescope" status=0 Record 35: "AIRMASS = 1.62358743709932 / Airmass at frame center (Gueymard 1993)" status=0 Record 36: "PIERSIDE= 'East' / Telescope pointing state" status=0 Record 37: "SITEELEV= 1009.5 / [m] Observation site elevation" status=0 Record 38: "SITELAT = 33.7482925 / [deg] Observation site latitude" status=0 Record 39: "SITELONG= -101.958319 / [deg] Observation site longitude" status=0 Record 40: "OBSERVER= 'Sokolovsky' / Observer name" status=0 Record 41: "OBSERVAT= 'TTU Skyview' / Observatory name" status=0 Record 42: "SITENAME= '' / Observatory site name" status=0 Record 43: "FWHEEL = 'Simulator' / Filter Wheel name" status=0 Record 44: "FILTER = 'CV' / Active filter name" status=0 Record 45: "OBJECT = 'Cet-11' / Name of the object of interest" status=0 Record 46: "OBJCTRA = '01 46 40' / [H M S] RA of imaged object" status=0 Record 47: "OBJCTDEC= '-18 00 00' / [D M S] Declination of imaged object" status=0 Record 48: "OBJCTROT= 0.0 / [deg] planned rotation of imaged object" status=0 Record 49: "FOCNAME = 'ZWO Focuser' / Focusing equipment name" status=0 Record 50: "FOCPOS = 20467 / [step] Focuser position" status=0 Record 51: "FOCUSPOS= 20467 / [step] Focuser position" status=0 Record 52: "FOCUSSZ = 0.0 / [um] Focuser step size" status=0 Record 53: "FOCTEMP = 20.9899997711182 / [degC] Focuser temperature" status=0 Record 54: "FOCUSTEM= 20.9899997711182 / [degC] Focuser temperature" status=0 Record 55: "DEWPOINT= 10.7 / [degC] Dew point" status=0 Record 56: "HUMIDITY= 38.0 / [percent] Relative humidity" status=0 Record 57: "PRESSURE= 899.7 / [hPa] Air pressure" status=0 Record 58: "AMBTEMP = 26.1 / [degC] Ambient air temperature" status=0 Record 59: "WINDDIR = 6.0 / [deg] Wind direction: 0=N, 180=S, 90=E, 270=W" status=0 Record 60: "WINDGUST= 7.200576 / [kph] Wind gust" status=0 Record 61: "WINDSPD = 4.00032 / [kph] Wind speed" status=0 Record 62: "ROWORDER= 'TOP-DOWN' / FITS Image Orientation" status=0 Record 63: "EQUINOX = 2000.0 / Equinox of celestial coordinate system" status=0 Record 64: "SWCREATE= 'N.I.N.A. 3.2.0.9001 (x64)' / Software that created this file" status=0 Record 65: "QHY_EXP = 20.000096 / [s] Actual exposure time" status=0 Record 66: "QHY_PP = 13888.0 / [ps] pixelPeriod" status=0 Record 67: "QHY_LP = 85000.0 / [ns] linePeriod" status=0 Record 68: "GPS_LP = 85000.0 / [ns] linePeriod" status=0 Record 69: "QHY_FP = 20000160.0 / [us] framePeriod" status=0 Record 70: "QHY_CPL = 6120.0 / clocksPerLine" status=0 Record 71: "QHY_LPF = 235295.0 / linesPerFrame" status=0 Record 72: "QHY_AET = 20000096.0 / [us] actualExposureTime" status=0 Record 73: "QHY_LEM = T / isLongExposureMode" status=0 Record 74: "QHY_OFF0= 3767.777 / [us] RollingShutterEndOffset row 0" status=0 Allocating memory for image, dark and result arrays... Reading image /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits 9576 6388 16 bitpix SET-TEMP= 0.000000 for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits SET-TEMP= 0.000000 for /var/www/nmw_calibration/TTUQ2b1x1/darks/mdark_TTUQ2b1x1_0C_20s_2026-08-12_multinight.fit CCD-TEMP= 0.000000 for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits CCD-TEMP= -0.000000 for /var/www/nmw_calibration/TTUQ2b1x1/darks/mdark_TTUQ2b1x1_0C_20s_2026-08-12_multinight.fit Reading dark frame /var/www/nmw_calibration/TTUQ2b1x1/darks/mdark_TTUQ2b1x1_0C_20s_2026-08-12_multinight.fit 9576 6388 16 bitpix Dark frame is subtracted, output is written to /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/d_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits :) Spent 0.523996 seconds renamed 'mdark_TTUQ2b1x1_0C_20s_2026-08-12_multinight.png' -> 'transient_report/dark.png' try_to_calibrate_the_input_frame(): selected flat field /var/www/nmw_calibration/TTUQ2b1x1/flats/mff_TTUQ2b1x1_2026-08-12_multinight.fit from directory /var/www/nmw_calibration/TTUQ2b1x1/flats MegaDivider v7 Reading image /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/d_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits 9576 6388 16 bitpix Reading flat /var/www/nmw_calibration/TTUQ2b1x1/flats/mff_TTUQ2b1x1_2026-08-12_multinight.fit 9576 6388 16 bitpix Avarage count on flat field image: 37096.658242 Minimal real count (from overscan): 5 Output is written to /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits :) No overscan detected - all values seem high! (left_median=24199.0, right_median=29433.0) renamed 'mff_TTUQ2b1x1_2026-08-12_multinight.png' -> 'transient_report/flat.png' Using calibrated image CALIBRATED_SECOND_EPOCH__SECOND_IMAGE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Dark frame used to calibrate the second-epoch images:

Flat field used to calibrate the second-epoch images:

after the calibration attempt: SECOND_EPOCH__FIRST_IMAGE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits SECOND_EPOCH__SECOND_IMAGE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Previews of the CALIBRATED second-epoch images:

fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits


fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits


Updating neverexclude_list.txt '/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt' Choosing bad regions list '/var/www/nmw_calibration/TTUQ2b1x1/TTUQ2_bad_region.lst' -> 'bad_region.lst' wait *------ default.sex.telephoto_lens_onlybrightstars_v1 ------* 'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex' Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1 ./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits SExtractor catalog cache: saved Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.cat to cache SExtractor catalog cache: saved Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.cat to cache VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1 The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Checking WCS cache directory local_wcs_cache Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images Checking WCS cache directory /home/NMW_web_upload/solved_reference_images Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images The reference JD(UT) for computing planet and comet positions: 2461286.92561554 Re-using ../asassn_transients_list.txt '../asassn_transients_list.txt' -> 'asassn_transients_list.txt' Re-using ../tocp_transients_list.txt '../tocp_transients_list.txt' -> 'tocp_transients_list.txt' Re-using ../tns_transients_list.txt '../tns_transients_list.txt' -> 'tns_transients_list.txt' Plate-solving the images wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits exists and is non-empty wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits exists and is non-empty wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits exists and is non-empty wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits exists and is non-empty ################################### # fov_of_wcs_calibrated_image.sh output for wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits (1st reference image) verification OK: wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits Image size: 941.5'x627.3' 15.7(deg)x10.5(deg) 9576x6388 pix Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis Image center: 01:46:40.180 -17:59:54.65 J2000 4789.000 3195.000 ################################### The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9" ################################### # fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits (1st new image) verification OK: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Image size: 937.0'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis Image center: 01:46:39.864 -18:00:06.10 J2000 4789.000 3195.000 ################################### ################################### # Check the image center offset between the reference and the first second-epoch image (pointing accuracy) Reference image center 01:46:40.180 -17:59:54.65 Second-epoch image center 01:46:39.864 -18:00:06.10 Angular distance between the image centers 0.0034 deg. Soft limit: 0.50 deg. Hard limit: 1.00 deg. ################################### ################################### # fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits (2nd new image) verification OK: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Image size: 937.0'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis Image center: 01:46:42.235 -18:00:42.51 J2000 4789.000 3195.000 ################################### ################################### # Check the image center offset between the reference and the second second-epoch image (pointing accuracy) Reference image center 01:46:40.180 -17:59:54.65 Second-epoch image center 01:46:42.235 -18:00:42.51 Angular distance between the image centers 0.0156 deg. ################################### ################################### # Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images) Second-epoch first image center 01:46:39.864 -18:00:06.10 Second-epoch second image center 01:46:42.235 -18:00:42.51 Angular distance between the image centers 0.01380 deg. ################################### Running solve_plate_with_UCAC5... Preparing for a parallel run Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits &> /tmp/tmp.Or4eEsXTBL Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits &> /tmp/tmp.JQ0cLwmt65 Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits &> /tmp/tmp.Fm3wQNWjF7 Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits &> /tmp/tmp.wgN3jeBYWg Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Calibrating the magnitude scale Found non-empty wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits ____ Start of magnitude calibration ____ PHOTOMETRIC_CALIBRATION=TYCHO2_V Calibrating the magnitude scale with Tycho-2 stars util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits and wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race) Tycho-2 catalog is found at lib/catalogs/tycho2 Tycho-2 catalog and the derived bright star exclusion list are ready Checking for the presence of non-empty wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits and wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat Found non-empty wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits and wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat The reference image (wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits) and catalog (wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat) found 'wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat' -> 'wcsmag.cat' Read 3748 stars from the SExtractor catalog wcsmag.cat Detected star coordinate range: RA 18.1303 to 35.1139 deg, Dec -23.2882 to -12.6120 deg Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19 Tycho-2 catalog search boundaries: RA 18.1303 to 35.1139 deg, Dec -23.2882 to -12.6120 deg Loaded 4115 Tycho-2 stars within the image boundaries (VT and BT non-zero). Relation between the catalog and instrumental magnitudes is written to calib.txt Stars used for magnitude calibration (good matches): 2743 out of 2866 total matches. Matched with Tycho-2 2866 out of 3748 detected stars. The calibration function type and coefficients are written to calib.txt_param util/calibrate_magnitude_scale 0.000000 1.000000 22.863300 a=0.000000 b=1.000000 c=22.863300 From vast_summary.log: estimated ref. image limiting mag.: -8.16 Updating vast_summary.log: Estimated ref. image limiting mag.: 14.70 Updated vast_limiting_magnitude.log with calibrated magnitudes Working... Please, PLEASE, be patient!!! All lightcurves processed! =) Estimated ref. image limiting mag.: 14.70
Lightcurve magnitude calibration plot:

Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V) Read 3748 stars from the SExtractor catalog wcsmag.cat Detected star coordinate range: RA 18.1303 to 35.1139 deg, Dec -23.2882 to -12.6120 deg Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19 Tycho-2 catalog search boundaries: RA 18.1303 to 35.1139 deg, Dec -23.2882 to -12.6120 deg Loaded 4115 Tycho-2 stars within the image boundaries (VT and BT non-zero). Relation between the catalog and instrumental magnitudes is written to calib.txt Stars used for magnitude calibration (good matches): 2743 out of 2866 total matches. Matched with Tycho-2 2866 out of 3748 detected stars. util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits:

Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits Forced-photometry filter: calibrated wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits -> calib.txt_param_ref_wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits (aperture=6.3) Read 4329 stars from the SExtractor catalog wcsmag.cat Detected star coordinate range: RA 18.3267 to 35.1802 deg, Dec -23.3270 to -12.4424 deg Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19 Tycho-2 catalog search boundaries: RA 18.3267 to 35.1802 deg, Dec -23.3270 to -12.4424 deg Loaded 4183 Tycho-2 stars within the image boundaries (VT and BT non-zero). Relation between the catalog and instrumental magnitudes is written to calib.txt Stars used for magnitude calibration (good matches): 3033 out of 3123 total matches. Matched with Tycho-2 3123 out of 4329 detected stars. util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits:

Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits Forced-photometry filter: calibrated wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits -> calib.txt_param_ref_wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits (aperture=5.7) ____ End of magnitude calibration ____ Applying consolidated magnitude filters... Preparing the exclusion lists for this field Done with filtering Found 0 candidate transients before the final filtering. (Hard limit: 10000) Median FWHM seeing for isolated stars: 2.3 pix Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits 2.1 pix Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits 2.2 pix fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits 2.2 pix fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Limiting magnitude estimates: 14.7 mag. Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits 15.0 mag. Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits 14.2 mag. fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits 14.2 mag. fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits All-image limiting magnitude estimate: 14.2 (SNR ) 11.3 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1 The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50). This value should be representative of the faintest stars clearly visible in the image. The brighter of the limiting magnitude estimates for the two second-epoch images is reported here. The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images. This value is representative of the faintest object that may enter the candidate transients list. The hard cut-off for the candidate transients is 15.5 mag. Waiting for UCAC5 plate solver wait cp: cannot create regular file 'local_wcs_cache/': Not a directory ############ /tmp/tmp.Or4eEsXTBL (6) ############ Parsing command line arguments... WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits is already a symlink and we do not allow symlinks on symlinks The guess is based on the existing WCS header. Trying to blindly solve the plate (local solve-field or remote server)... /data_ssd/NMW-TexasTech/workdir/vast_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits 573.0 Entering WCS image calibration mode. ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits is already a symlink and we do not allow symlinks on symlinks FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits It's a known telescope with plate solutions that are supposed to be good. The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits has a WCS header - will blindly trust it is good... '/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits' -> 'wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits' This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5 FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits WCS_IMAGE_NAME=wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits WCS-calibrated image found: wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits Checking if the catalog wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat corresponding to the image wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits alredy exist and is non-empty... Catalog wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat corresponding to the image wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits found. The catalog is in the new format, as expected. The plate-solved (WCS-calibrated) image is saved to wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits WCS catalog name: wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst) Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst) Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst) Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst) Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst) Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst) Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst) Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst) Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst) Excluding more image regions!.. (will not print them all) Excluded a total of 31 image regions (defined in bad_region.lst). SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=374, bad_region=898, passed=3748 Got 3748 stars (including 2571 good ones) from the SExtractor catalog wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat util/solve_plate_with_UCAC5 got 3748 stars from the SExtractor catalog Updated FoV from the plate-solved image: 941.5' Seting catalog search parameters based on the expected field of view 941.5 arcmin UCAC5 catalog search parameters: catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec) catalog_search_parameters->brightest_mag= 1.00 catalog_search_parameters->faintest_mag= 13.50 catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec) ITERATION 01 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 2528 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Correcting the measured astrometric positions... Accuracy estimation diagnostic: 2528 matched stars entering correct_measured_positions(), 2528 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.34" Removing outliers... Correcting the measured astrometric positions... Accuracy estimation diagnostic: 2528 matched stars entering correct_measured_positions(), 3031 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.33" ITERATION 02 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 2528 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Accuracy estimation diagnostic: 2528 matched stars entering correct_measured_positions(), 3031 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.35" Accuracy estimation diagnostic: 2528 matched stars entering correct_measured_positions(), 3031 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.36" Excluding outliers - 2528 stars left (next iteration limit 2780) Stop iterations. The field is successfully solved and matched with the astrometric catalog! :) SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway) WCS_QUALITY_DIAG: file=Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits N_match=2528 sigma_overall_arcsec=0.400 sigma_q1_arcsec=0.436 sigma_q2_arcsec=0.388 sigma_q3_arcsec=0.370 sigma_q4_arcsec=0.374 n_q1=748 n_q2=506 n_q3=779 n_q4=495 worst_quadrant_to_overall_ratio=1.090 The image catalog is written to wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat.ucac5 The DS9 region file with the matched stars is written to wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat.ds9.reg You may view it with the command: ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits -region wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat.ds9.reg The astrometric residuals vector field is written to wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat.astrometric_residuals Option '-n' not using photometric catalogs, just stick with astrometry opt '-i': 2 is the maximum number of iterations FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry ############ /tmp/tmp.JQ0cLwmt65 (6) ############ Parsing command line arguments... WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits is already a symlink and we do not allow symlinks on symlinks The guess is based on the existing WCS header. Trying to blindly solve the plate (local solve-field or remote server)... /data_ssd/NMW-TexasTech/workdir/vast_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits 573.0 Entering WCS image calibration mode. ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits is already a symlink and we do not allow symlinks on symlinks FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits It's a known telescope with plate solutions that are supposed to be good. The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits has a WCS header - will blindly trust it is good... '/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits' -> 'wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits' This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5 FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits WCS_IMAGE_NAME=wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits WCS-calibrated image found: wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits Checking if the catalog wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat corresponding to the image wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits alredy exist and is non-empty... Catalog wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat corresponding to the image wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits found. The catalog is in the new format, as expected. The plate-solved (WCS-calibrated) image is saved to wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits WCS catalog name: wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst) Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst) Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst) Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst) Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst) Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst) Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst) Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst) Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst) Excluding more image regions!.. (will not print them all) Excluded a total of 31 image regions (defined in bad_region.lst). SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=326, bad_region=1019, passed=4329 Got 4329 stars (including 3046 good ones) from the SExtractor catalog wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat util/solve_plate_with_UCAC5 got 4329 stars from the SExtractor catalog Updated FoV from the plate-solved image: 941.7' Seting catalog search parameters based on the expected field of view 941.7 arcmin UCAC5 catalog search parameters: catalog_search_parameters->search_radius_deg= 0.013079 (47.1 arcsec) catalog_search_parameters->brightest_mag= 1.00 catalog_search_parameters->faintest_mag= 13.50 catalog_search_parameters->search_radius_second_step_deg 0.010463 (37.7 arcsec) ITERATION 01 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 389 (Dec -23.3 to -12.4) Done reading UCAC5 zone files... Matched 2978 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Correcting the measured astrometric positions... Accuracy estimation diagnostic: 2977 matched stars entering correct_measured_positions(), 2977 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.24" Removing outliers... Correcting the measured astrometric positions... Accuracy estimation diagnostic: 2977 matched stars entering correct_measured_positions(), 3480 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.23" ITERATION 02 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 389 (Dec -23.3 to -12.4) Done reading UCAC5 zone files... Matched 2978 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Accuracy estimation diagnostic: 2977 matched stars entering correct_measured_positions(), 3480 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.24" Accuracy estimation diagnostic: 2977 matched stars entering correct_measured_positions(), 3480 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.24" Excluding outliers - 2977 stars left (next iteration limit 3274) Stop iterations. The field is successfully solved and matched with the astrometric catalog! :) SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway) WCS_QUALITY_DIAG: file=Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits N_match=2977 sigma_overall_arcsec=0.265 sigma_q1_arcsec=0.345 sigma_q2_arcsec=0.241 sigma_q3_arcsec=0.254 sigma_q4_arcsec=0.229 n_q1=929 n_q2=528 n_q3=973 n_q4=547 worst_quadrant_to_overall_ratio=1.304 The image catalog is written to wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat.ucac5 The DS9 region file with the matched stars is written to wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat.ds9.reg You may view it with the command: ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits -region wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat.ds9.reg The astrometric residuals vector field is written to wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat.astrometric_residuals Option '-n' not using photometric catalogs, just stick with astrometry opt '-i': 2 is the maximum number of iterations FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry ############ /tmp/tmp.Fm3wQNWjF7 (6) ############ Parsing command line arguments... The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um Internal estimated FoV 605.3' The guess is based on the FOCALLEN keyword. Trying to blindly solve the plate (local solve-field or remote server)... /data_ssd/NMW-TexasTech/workdir/vast_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits 605.0 Entering WCS image calibration mode. ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve! FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits WCS_IMAGE_NAME=wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits WCS-calibrated image found: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Checking if the catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat corresponding to the image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits alredy exist and is non-empty... Catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat corresponding to the image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits found. The catalog is in the new format, as expected. The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits WCS catalog name: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst) Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst) Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst) Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst) Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst) Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst) Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst) Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst) Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst) Excluding more image regions!.. (will not print them all) Excluded a total of 31 image regions (defined in bad_region.lst). SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=218, bad_region=585, passed=2574 Got 2574 stars (including 1813 good ones) from the SExtractor catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat util/solve_plate_with_UCAC5 got 2574 stars from the SExtractor catalog Updated FoV from the plate-solved image: 937.0' Seting catalog search parameters based on the expected field of view 937.0 arcmin UCAC5 catalog search parameters: catalog_search_parameters->search_radius_deg= 0.013014 (46.9 arcsec) catalog_search_parameters->brightest_mag= 1.00 catalog_search_parameters->faintest_mag= 13.50 catalog_search_parameters->search_radius_second_step_deg 0.010411 (37.5 arcsec) ITERATION 01 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 1776 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Correcting the measured astrometric positions... Accuracy estimation diagnostic: 1776 matched stars entering correct_measured_positions(), 1776 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.31" Removing outliers... Correcting the measured astrometric positions... Accuracy estimation diagnostic: 1776 matched stars entering correct_measured_positions(), 2060 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.31" ITERATION 02 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 1776 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Accuracy estimation diagnostic: 1776 matched stars entering correct_measured_positions(), 2060 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.32" Accuracy estimation diagnostic: 1776 matched stars entering correct_measured_positions(), 2060 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.32" Excluding outliers - 1776 stars left (next iteration limit 1953) Stop iterations. The field is successfully solved and matched with the astrometric catalog! :) SIP_REFIT: SIP order 2 trial: matched=1776 robust_rms=6.438 arcsec worst_quadrant_rms=9.487 arcsec SIP_REFIT: SIP order 3 trial: matched=1776 robust_rms=0.366 arcsec worst_quadrant_rms=0.384 arcsec SIP_REFIT: SIP order 5 trial: matched=1776 robust_rms=0.320 arcsec worst_quadrant_rms=0.339 arcsec SIP_REFIT: selected SIP order 5 SIP_REFIT: order=5 matched=1776 robust_rms_before=0.981 arcsec robust_rms_before_corrected=0.330 arcsec robust_rms_after=0.320 arcsec worst_quadrant_rms_before=0.347 worst_quadrant_rms_after=0.339 SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.347 arcsec) - keeping the original WCS_QUALITY_DIAG: file=fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits N_match=1776 sigma_overall_arcsec=0.345 sigma_q1_arcsec=0.327 sigma_q2_arcsec=0.360 sigma_q3_arcsec=0.339 sigma_q4_arcsec=0.356 n_q1=586 n_q2=326 n_q3=552 n_q4=312 worst_quadrant_to_overall_ratio=1.043 The image catalog is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat.ucac5 The DS9 region file with the matched stars is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat.ds9.reg You may view it with the command: ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits -region wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat.ds9.reg The astrometric residuals vector field is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat.astrometric_residuals Option '-n' not using photometric catalogs, just stick with astrometry opt '-i': 2 is the maximum number of iterations FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry ############ /tmp/tmp.wgN3jeBYWg (6) ############ Parsing command line arguments... The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um Internal estimated FoV 605.3' The guess is based on the FOCALLEN keyword. Trying to blindly solve the plate (local solve-field or remote server)... /data_ssd/NMW-TexasTech/workdir/vast_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits 605.0 Entering WCS image calibration mode. ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve! FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits WCS_IMAGE_NAME=wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits WCS-calibrated image found: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Checking if the catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat corresponding to the image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits alredy exist and is non-empty... Catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat corresponding to the image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits found. The catalog is in the new format, as expected. The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits WCS catalog name: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst) Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst) Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst) Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst) Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst) Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst) Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst) Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst) Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst) Excluding more image regions!.. (will not print them all) Excluded a total of 31 image regions (defined in bad_region.lst). SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=210, bad_region=583, passed=2595 Got 2595 stars (including 1839 good ones) from the SExtractor catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat util/solve_plate_with_UCAC5 got 2595 stars from the SExtractor catalog Updated FoV from the plate-solved image: 937.0' Seting catalog search parameters based on the expected field of view 937.0 arcmin UCAC5 catalog search parameters: catalog_search_parameters->search_radius_deg= 0.013014 (46.9 arcsec) catalog_search_parameters->brightest_mag= 1.00 catalog_search_parameters->faintest_mag= 13.50 catalog_search_parameters->search_radius_second_step_deg 0.010411 (37.5 arcsec) ITERATION 01 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 1802 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Correcting the measured astrometric positions... Accuracy estimation diagnostic: 1802 matched stars entering correct_measured_positions(), 1802 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.28" Removing outliers... Correcting the measured astrometric positions... Accuracy estimation diagnostic: 1802 matched stars entering correct_measured_positions(), 2077 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.28" ITERATION 02 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 1802 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Accuracy estimation diagnostic: 1802 matched stars entering correct_measured_positions(), 2077 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.29" Accuracy estimation diagnostic: 1802 matched stars entering correct_measured_positions(), 2077 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.29" Excluding outliers - 1802 stars left (next iteration limit 1982) Stop iterations. The field is successfully solved and matched with the astrometric catalog! :) SIP_REFIT: SIP order 2 trial: matched=1802 robust_rms=6.514 arcsec worst_quadrant_rms=9.579 arcsec SIP_REFIT: SIP order 3 trial: matched=1802 robust_rms=0.355 arcsec worst_quadrant_rms=0.380 arcsec SIP_REFIT: SIP order 5 trial: matched=1802 robust_rms=0.299 arcsec worst_quadrant_rms=0.312 arcsec SIP_REFIT: selected SIP order 5 SIP_REFIT: order=5 matched=1802 robust_rms_before=0.979 arcsec robust_rms_before_corrected=0.302 arcsec robust_rms_after=0.299 arcsec worst_quadrant_rms_before=0.313 worst_quadrant_rms_after=0.312 SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.313 arcsec) - keeping the original WCS_QUALITY_DIAG: file=fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits N_match=1802 sigma_overall_arcsec=0.305 sigma_q1_arcsec=0.282 sigma_q2_arcsec=0.312 sigma_q3_arcsec=0.316 sigma_q4_arcsec=0.311 n_q1=601 n_q2=334 n_q3=554 n_q4=313 worst_quadrant_to_overall_ratio=1.035 The image catalog is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat.ucac5 The DS9 region file with the matched stars is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat.ds9.reg You may view it with the command: ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits -region wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat.ds9.reg The astrometric residuals vector field is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat.astrometric_residuals Option '-n' not using photometric catalogs, just stick with astrometry opt '-i': 2 is the maximum number of iterations FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry Saving the final (post-refit) wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits to local_wcs_cache/ 'wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits' -> 'local_wcs_cache/wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits' Saving the final (post-refit) wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits to local_wcs_cache/ 'wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits' -> 'local_wcs_cache/wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits' Saving the final (post-refit) wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits to local_wcs_cache/ 'wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits' -> 'local_wcs_cache/wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits' Saving the final (post-refit) wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits to local_wcs_cache/ 'wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits' -> 'local_wcs_cache/wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits' ################################### # Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above) ref1=Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits sigma_overall=0.400 worst_q_ratio=1.090 ref2=Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits sigma_overall=0.265 worst_q_ratio=1.304 new1=fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits sigma_overall=0.345 worst_q_ratio=1.043 new2=fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits sigma_overall=0.305 worst_q_ratio=1.035 reference average sigma_overall=0.3325 worst_q_ratio=1.197 warn-on-ratio threshold: 2.0x reference ###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028_astrometric_residuals.png (2528 matched stars from wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.35 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086_astrometric_residuals.png (2977 matched stars from wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.24 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486_astrometric_residuals.png (1776 matched stars from wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.31 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487_astrometric_residuals.png (1802 matched stars from wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.27 arcsec)
Copying WCS-calibrated images back to input directory Saving fully-calibrated image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image) 'wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits' Saving fully-calibrated image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image) 'wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits' Preparing the HTML report for the field Cet-11-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1 No candidates found here Prepared the HTML report for the field Cet-11-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1 *------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------* #### The local exclusion list is exclusion_list_local.txt #### wait *------ default.sex.telephoto_lens_vSTL ------* 'default.sex.telephoto_lens_vSTL' -> 'default.sex' Starting VaST with default.sex.telephoto_lens_vSTL ./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits SExtractor catalog cache: saved Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.cat to cache SExtractor catalog cache: saved Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.cat to cache VaST run complete with default.sex.telephoto_lens_vSTL The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Checking WCS cache directory local_wcs_cache Found WCS cache directory local_wcs_cache Creating symlink local_wcs_cache/wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits Creating symlink local_wcs_cache/wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits Creating symlink local_wcs_cache/wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Creating symlink local_wcs_cache/wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images Checking WCS cache directory /home/NMW_web_upload/solved_reference_images Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images Plate-solving the images wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits exists and is non-empty wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits exists and is non-empty wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits exists and is non-empty wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits exists and is non-empty ################################### # fov_of_wcs_calibrated_image.sh output for wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits (1st reference image) verification OK: wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits Image size: 941.5'x627.3' 15.7(deg)x10.5(deg) 9576x6388 pix Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis Image center: 01:46:40.180 -17:59:54.65 J2000 4789.000 3195.000 ################################### The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9" ################################### # fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits (1st new image) verification OK: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Image size: 937.0'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis Image center: 01:46:39.864 -18:00:06.10 J2000 4789.000 3195.000 ################################### ################################### # Check the image center offset between the reference and the first second-epoch image (pointing accuracy) Reference image center 01:46:40.180 -17:59:54.65 Second-epoch image center 01:46:39.864 -18:00:06.10 Angular distance between the image centers 0.0034 deg. Soft limit: 0.50 deg. Hard limit: 1.00 deg. ################################### ################################### # fov_of_wcs_calibrated_image.sh output for wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits (2nd new image) verification OK: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Image size: 937.0'x624.2' 15.6(deg)x10.4(deg) 9576x6388 pix Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis Image center: 01:46:42.235 -18:00:42.51 J2000 4789.000 3195.000 ################################### ################################### # Check the image center offset between the reference and the second second-epoch image (pointing accuracy) Reference image center 01:46:40.180 -17:59:54.65 Second-epoch image center 01:46:42.235 -18:00:42.51 Angular distance between the image centers 0.0156 deg. ################################### ################################### # Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images) Second-epoch first image center 01:46:39.864 -18:00:06.10 Second-epoch second image center 01:46:42.235 -18:00:42.51 Angular distance between the image centers 0.01380 deg. ################################### Running solve_plate_with_UCAC5... Preparing for a parallel run Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits &> /tmp/tmp.phAcbLEcOB Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits &> /tmp/tmp.RNE3b1RUZL Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits &> /tmp/tmp.AkESsO0cPm Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits &> /tmp/tmp.o6h0Lbgw5z Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Calibrating the magnitude scale Found non-empty wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits ____ Start of magnitude calibration ____ PHOTOMETRIC_CALIBRATION=TYCHO2_V Calibrating the magnitude scale with Tycho-2 stars util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits and wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race) Tycho-2 catalog is found at lib/catalogs/tycho2 Tycho-2 catalog and the derived bright star exclusion list are ready Checking for the presence of non-empty wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits and wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat Found non-empty wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits and wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat The reference image (wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits) and catalog (wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat) found 'wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat' -> 'wcsmag.cat' Read 21033 stars from the SExtractor catalog wcsmag.cat Detected star coordinate range: RA 18.1142 to 35.1618 deg, Dec -23.2881 to -12.5807 deg Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19 Tycho-2 catalog search boundaries: RA 18.1142 to 35.1618 deg, Dec -23.2881 to -12.5807 deg Loaded 4142 Tycho-2 stars within the image boundaries (VT and BT non-zero). Relation between the catalog and instrumental magnitudes is written to calib.txt Stars used for magnitude calibration (good matches): 3196 out of 3400 total matches. Matched with Tycho-2 3400 out of 21033 detected stars. The calibration function type and coefficients are written to calib.txt_param util/calibrate_magnitude_scale 0.000000 1.000000 22.726550 a=0.000000 b=1.000000 c=22.726550 From vast_summary.log: estimated ref. image limiting mag.: -7.85 Updating vast_summary.log: Estimated ref. image limiting mag.: 14.88 Updated vast_limiting_magnitude.log with calibrated magnitudes Working... Please, PLEASE, be patient!!! All lightcurves processed! =) Estimated ref. image limiting mag.: 14.88
Lightcurve magnitude calibration plot:

Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V) Read 21033 stars from the SExtractor catalog wcsmag.cat Detected star coordinate range: RA 18.1142 to 35.1618 deg, Dec -23.2881 to -12.5807 deg Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19 Tycho-2 catalog search boundaries: RA 18.1142 to 35.1618 deg, Dec -23.2881 to -12.5807 deg Loaded 4142 Tycho-2 stars within the image boundaries (VT and BT non-zero). Relation between the catalog and instrumental magnitudes is written to calib.txt Stars used for magnitude calibration (good matches): 3196 out of 3400 total matches. Matched with Tycho-2 3400 out of 21033 detected stars. util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits:

Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits Forced-photometry filter: calibrated wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits -> calib.txt_param_ref_wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits (aperture=4.9) Read 23371 stars from the SExtractor catalog wcsmag.cat Detected star coordinate range: RA 18.3056 to 35.3091 deg, Dec -23.3269 to -12.4103 deg Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18 Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19 Tycho-2 catalog search boundaries: RA 18.3056 to 35.3091 deg, Dec -23.3269 to -12.4103 deg Loaded 4230 Tycho-2 stars within the image boundaries (VT and BT non-zero). Relation between the catalog and instrumental magnitudes is written to calib.txt Stars used for magnitude calibration (good matches): 3215 out of 3388 total matches. Matched with Tycho-2 3388 out of 23371 detected stars. util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits:

Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits Forced-photometry filter: calibrated wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits -> calib.txt_param_ref_wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits (aperture=4.7) ____ End of magnitude calibration ____ Applying consolidated magnitude filters... Preparing the exclusion lists for this field Done with filtering Found 3 candidate transients before the final filtering. (Hard limit: 10000) Median FWHM seeing for isolated stars: 2.1 pix Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits 2.0 pix Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits 2.1 pix fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits 2.1 pix fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Limiting magnitude estimates: 14.9 mag. Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits 15.1 mag. Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits 14.3 mag. fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits 14.3 mag. fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits All-image limiting magnitude estimate: 14.3 (SNR ) 13.8 (80% of stars) with default.sex.telephoto_lens_vSTL The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50). This value should be representative of the faintest stars clearly visible in the image. The brighter of the limiting magnitude estimates for the two second-epoch images is reported here. The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images. This value is representative of the faintest object that may enter the candidate transients list. The hard cut-off for the candidate transients is 15.5 mag. Waiting for UCAC5 plate solver wait ############ /tmp/tmp.phAcbLEcOB (6) ############ Parsing command line arguments... WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits is already a symlink and we do not allow symlinks on symlinks The guess is based on the existing WCS header. Trying to blindly solve the plate (local solve-field or remote server)... /data_ssd/NMW-TexasTech/workdir/vast_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits 573.0 Entering WCS image calibration mode. ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits is already a symlink and we do not allow symlinks on symlinks FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits It's a known telescope with plate solutions that are supposed to be good. The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits has a WCS header - will blindly trust it is good... '/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits' -> 'wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits' This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5 FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits WCS_IMAGE_NAME=wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits WCS-calibrated image found: wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits Checking if the catalog wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat corresponding to the image wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits alredy exist and is non-empty... Catalog wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat corresponding to the image wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits found. The catalog is in the new format, as expected. The plate-solved (WCS-calibrated) image is saved to wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits WCS catalog name: wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst) Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst) Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst) Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst) Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst) Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst) Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst) Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst) Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst) Excluding more image regions!.. (will not print them all) Excluded a total of 31 image regions (defined in bad_region.lst). SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=2, blended=795, bad_region=4192, passed=21031 Got 21031 stars (including 16212 good ones) from the SExtractor catalog wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat util/solve_plate_with_UCAC5 got 21031 stars from the SExtractor catalog Updated FoV from the plate-solved image: 941.5' Seting catalog search parameters based on the expected field of view 941.5 arcmin UCAC5 catalog search parameters: catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec) catalog_search_parameters->brightest_mag= 1.00 catalog_search_parameters->faintest_mag= 13.50 catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec) ITERATION 01 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 389 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 4861 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Correcting the measured astrometric positions... Accuracy estimation diagnostic: 4854 matched stars entering correct_measured_positions(), 4854 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.35" Removing outliers... Correcting the measured astrometric positions... Accuracy estimation diagnostic: 4854 matched stars entering correct_measured_positions(), 17784 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.35" ITERATION 02 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 389 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 4861 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Accuracy estimation diagnostic: 4854 matched stars entering correct_measured_positions(), 17784 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.36" Accuracy estimation diagnostic: 4854 matched stars entering correct_measured_positions(), 17784 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.37" Excluding outliers - 4854 stars left (next iteration limit 5339) Stop iterations. The field is successfully solved and matched with the astrometric catalog! :) SIP_REFIT: wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway) WCS_QUALITY_DIAG: file=Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits N_match=4854 sigma_overall_arcsec=0.412 sigma_q1_arcsec=0.458 sigma_q2_arcsec=0.390 sigma_q3_arcsec=0.395 sigma_q4_arcsec=0.384 n_q1=1466 n_q2=935 n_q3=1537 n_q4=916 worst_quadrant_to_overall_ratio=1.113 The image catalog is written to wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat.ucac5 The DS9 region file with the matched stars is written to wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat.ds9.reg You may view it with the command: ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits -region wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat.ds9.reg The astrometric residuals vector field is written to wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits.wcscat.astrometric_residuals Option '-n' not using photometric catalogs, just stick with astrometry opt '-i': 2 is the maximum number of iterations FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry ############ /tmp/tmp.RNE3b1RUZL (6) ############ Parsing command line arguments... WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits is already a symlink and we do not allow symlinks on symlinks The guess is based on the existing WCS header. Trying to blindly solve the plate (local solve-field or remote server)... /data_ssd/NMW-TexasTech/workdir/vast_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits 573.0 Entering WCS image calibration mode. ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits is already a symlink and we do not allow symlinks on symlinks FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits It's a known telescope with plate solutions that are supposed to be good. The input image /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits has a WCS header - will blindly trust it is good... '/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits' -> 'wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits' This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5 FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits WCS_IMAGE_NAME=wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits WCS-calibrated image found: wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits Checking if the catalog wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat corresponding to the image wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits alredy exist and is non-empty... Catalog wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat corresponding to the image wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits found. The catalog is in the new format, as expected. The plate-solved (WCS-calibrated) image is saved to wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits WCS catalog name: wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst) Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst) Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst) Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst) Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst) Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst) Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst) Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst) Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst) Excluding more image regions!.. (will not print them all) Excluded a total of 31 image regions (defined in bad_region.lst). SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=11, blended=721, bad_region=4135, passed=23360 Got 23360 stars (including 18613 good ones) from the SExtractor catalog wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat util/solve_plate_with_UCAC5 got 23360 stars from the SExtractor catalog Updated FoV from the plate-solved image: 941.7' Seting catalog search parameters based on the expected field of view 941.7 arcmin UCAC5 catalog search parameters: catalog_search_parameters->search_radius_deg= 0.013079 (47.1 arcsec) catalog_search_parameters->brightest_mag= 1.00 catalog_search_parameters->faintest_mag= 13.50 catalog_search_parameters->search_radius_second_step_deg 0.010463 (37.7 arcsec) ITERATION 01 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 389 (Dec -23.3 to -12.4) Done reading UCAC5 zone files... Matched 4860 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Correcting the measured astrometric positions... Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 4855 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.26" Removing outliers... Correcting the measured astrometric positions... Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 20150 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.26" ITERATION 02 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 389 (Dec -23.3 to -12.4) Done reading UCAC5 zone files... Matched 4860 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 20150 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.26" Accuracy estimation diagnostic: 4855 matched stars entering correct_measured_positions(), 20150 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.28" Excluding outliers - 4855 stars left (next iteration limit 5340) Stop iterations. The field is successfully solved and matched with the astrometric catalog! :) SIP_REFIT: wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions SIP_REFIT: util/identify.sh trusts the WCS of wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway) WCS_QUALITY_DIAG: file=Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits N_match=4855 sigma_overall_arcsec=0.290 sigma_q1_arcsec=0.355 sigma_q2_arcsec=0.268 sigma_q3_arcsec=0.266 sigma_q4_arcsec=0.261 n_q1=1610 n_q2=901 n_q3=1501 n_q4=843 worst_quadrant_to_overall_ratio=1.222 The image catalog is written to wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat.ucac5 The DS9 region file with the matched stars is written to wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat.ds9.reg You may view it with the command: ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits -region wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat.ds9.reg The astrometric residuals vector field is written to wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits.wcscat.astrometric_residuals Option '-n' not using photometric catalogs, just stick with astrometry opt '-i': 2 is the maximum number of iterations FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry ############ /tmp/tmp.AkESsO0cPm (6) ############ Parsing command line arguments... The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um Internal estimated FoV 605.3' The guess is based on the FOCALLEN keyword. Trying to blindly solve the plate (local solve-field or remote server)... /data_ssd/NMW-TexasTech/workdir/vast_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits 605.0 Entering WCS image calibration mode. ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve! FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits WCS_IMAGE_NAME=wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits WCS-calibrated image found: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Checking if the catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat corresponding to the image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits alredy exist and is non-empty... Catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat corresponding to the image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits found. The catalog is in the new format, as expected. The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits WCS catalog name: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst) Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst) Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst) Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst) Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst) Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst) Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst) Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst) Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst) Excluding more image regions!.. (will not print them all) Excluded a total of 31 image regions (defined in bad_region.lst). SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=514, bad_region=2281, passed=14635 Got 14635 stars (including 12032 good ones) from the SExtractor catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat util/solve_plate_with_UCAC5 got 14635 stars from the SExtractor catalog Updated FoV from the plate-solved image: 937.0' Seting catalog search parameters based on the expected field of view 937.0 arcmin UCAC5 catalog search parameters: catalog_search_parameters->search_radius_deg= 0.013014 (46.9 arcsec) catalog_search_parameters->brightest_mag= 1.00 catalog_search_parameters->faintest_mag= 13.50 catalog_search_parameters->search_radius_second_step_deg 0.010411 (37.5 arcsec) ITERATION 01 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 4856 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Correcting the measured astrometric positions... Accuracy estimation diagnostic: 4851 matched stars entering correct_measured_positions(), 4851 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.36" Removing outliers... Correcting the measured astrometric positions... Accuracy estimation diagnostic: 4851 matched stars entering correct_measured_positions(), 12876 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.36" ITERATION 02 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 4856 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Accuracy estimation diagnostic: 4851 matched stars entering correct_measured_positions(), 12876 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.37" Accuracy estimation diagnostic: 4851 matched stars entering correct_measured_positions(), 12876 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.38" Excluding outliers - 4851 stars left (next iteration limit 5336) Stop iterations. The field is successfully solved and matched with the astrometric catalog! :) SIP_REFIT: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions SIP_REFIT: SIP order 2 trial: matched=4851 robust_rms=6.216 arcsec worst_quadrant_rms=10.154 arcsec SIP_REFIT: SIP order 3 trial: matched=4851 robust_rms=0.436 arcsec worst_quadrant_rms=0.453 arcsec SIP_REFIT: SIP order 5 trial: matched=4851 robust_rms=0.390 arcsec worst_quadrant_rms=0.407 arcsec SIP_REFIT: selected SIP order 5 SIP_REFIT: order=5 matched=4851 robust_rms_before=1.007 arcsec robust_rms_before_corrected=0.392 arcsec robust_rms_after=0.390 arcsec worst_quadrant_rms_before=0.405 worst_quadrant_rms_after=0.407 SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.405 arcsec) - keeping the original WCS_QUALITY_DIAG: file=fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits N_match=4851 sigma_overall_arcsec=0.404 sigma_q1_arcsec=0.381 sigma_q2_arcsec=0.424 sigma_q3_arcsec=0.408 sigma_q4_arcsec=0.426 n_q1=1648 n_q2=883 n_q3=1538 n_q4=782 worst_quadrant_to_overall_ratio=1.056 The image catalog is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat.ucac5 The DS9 region file with the matched stars is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat.ds9.reg You may view it with the command: ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits -region wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat.ds9.reg The astrometric residuals vector field is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits.wcscat.astrometric_residuals Option '-n' not using photometric catalogs, just stick with astrometry opt '-i': 2 is the maximum number of iterations FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry ############ /tmp/tmp.o6h0Lbgw5z (6) ############ Parsing command line arguments... The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um Internal estimated FoV 605.3' The guess is based on the FOCALLEN keyword. Trying to blindly solve the plate (local solve-field or remote server)... /data_ssd/NMW-TexasTech/workdir/vast_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits 605.0 Entering WCS image calibration mode. ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve! FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits WCS_IMAGE_NAME=wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits WCS-calibrated image found: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Checking if the catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat corresponding to the image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits alredy exist and is non-empty... Catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat corresponding to the image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits found. The catalog is in the new format, as expected. The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits WCS catalog name: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst) Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst) Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst) Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst) Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst) Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst) Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst) Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst) Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst) Excluding more image regions!.. (will not print them all) Excluded a total of 31 image regions (defined in bad_region.lst). SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=1, blended=473, bad_region=2269, passed=14452 Got 14452 stars (including 11871 good ones) from the SExtractor catalog wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat util/solve_plate_with_UCAC5 got 14452 stars from the SExtractor catalog Updated FoV from the plate-solved image: 937.0' Seting catalog search parameters based on the expected field of view 937.0 arcmin UCAC5 catalog search parameters: catalog_search_parameters->search_radius_deg= 0.013014 (46.9 arcsec) catalog_search_parameters->brightest_mag= 1.00 catalog_search_parameters->faintest_mag= 13.50 catalog_search_parameters->search_radius_second_step_deg 0.010411 (37.5 arcsec) ITERATION 01 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 4853 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Correcting the measured astrometric positions... Accuracy estimation diagnostic: 4848 matched stars entering correct_measured_positions(), 4848 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.35" Removing outliers... Correcting the measured astrometric positions... Accuracy estimation diagnostic: 4848 matched stars entering correct_measured_positions(), 12711 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.35" ITERATION 02 -- talking to VizieR, this might be slow! UCAC5 search strategy: trying local copy first Found a local copy of UCAC5 UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50 Reading UCAC5 zone files... Searching UCAC5 zones 333 to 388 (Dec -23.3 to -12.6) Done reading UCAC5 zone files... Matched 4853 stars with the local copy of UCAC5. The local UCAC5 search seems to be a success Accuracy estimation diagnostic: 4848 matched stars entering correct_measured_positions(), 12711 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.36" Accuracy estimation diagnostic: 4848 matched stars entering correct_measured_positions(), 12711 with non-zero local correction accuracy Estimated accuracy of the plate solution: 0.37" Excluding outliers - 4848 stars left (next iteration limit 5332) Stop iterations. The field is successfully solved and matched with the astrometric catalog! :) SIP_REFIT: wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits is a symbolic link - will not rewrite the WCS of whatever it points to, but will still refit the output catalog positions SIP_REFIT: SIP order 2 trial: matched=4848 robust_rms=6.421 arcsec worst_quadrant_rms=10.040 arcsec SIP_REFIT: SIP order 3 trial: matched=4848 robust_rms=0.434 arcsec worst_quadrant_rms=0.447 arcsec SIP_REFIT: SIP order 5 trial: matched=4848 robust_rms=0.386 arcsec worst_quadrant_rms=0.405 arcsec SIP_REFIT: selected SIP order 5 SIP_REFIT: order=5 matched=4848 robust_rms_before=1.012 arcsec robust_rms_before_corrected=0.384 arcsec robust_rms_after=0.386 arcsec worst_quadrant_rms_before=0.409 worst_quadrant_rms_after=0.405 SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.409 arcsec) - keeping the original WCS_QUALITY_DIAG: file=fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits N_match=4848 sigma_overall_arcsec=0.380 sigma_q1_arcsec=0.353 sigma_q2_arcsec=0.391 sigma_q3_arcsec=0.386 sigma_q4_arcsec=0.402 n_q1=1643 n_q2=883 n_q3=1537 n_q4=785 worst_quadrant_to_overall_ratio=1.057 The image catalog is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat.ucac5 The DS9 region file with the matched stars is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat.ds9.reg You may view it with the command: ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits -region wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat.ds9.reg The astrometric residuals vector field is written to wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits.wcscat.astrometric_residuals Option '-n' not using photometric catalogs, just stick with astrometry opt '-i': 2 is the maximum number of iterations FORCED_PHOTOMETRY_CALIBRATION_METHOD=tycho2 - not using remote photometric catalogs, just stick with astrometry Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL) Copying WCS-calibrated images back to input directory Saving fully-calibrated image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image) The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Saving fully-calibrated image wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image) The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/wcs_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits Preparing the HTML report for the field Cet-11-Q2b1x1 with default.sex.telephoto_lens_vSTL Forced photometry on wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits at 02:03:56.47 -17:32:13.2: 13.26 +/- 0.06 detection Forced photometry on wcs_Cet-11-Q2b1x1_2025-12-26_19-27-01_20.00sec_-14.90C_LIGHT_0028.fits at 01:48:58.97 -20:39:08.9: 12.99 +/- 0.04 detection Forced photometry on wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits at 01:48:58.97 -20:39:08.9: 13.18 +/- 0.04 detection Forced photometry on wcs_Cet-11-Q2b1x1_2026-01-20_20-47-17_20.00sec_-14.90C_LIGHT_0086.fits at 02:03:56.47 -17:32:13.2: 13.18 +/- 0.04 detection Forced photometry reference-image weighted average: 13.09 +/- 0.03 Forced photometry reference-image weighted average: 13.21 +/- 0.03 Forced photometry filter REJECTED candidate at 02:03:56.47 -17:32:13.2: ref_mag=13.21 +/- 0.03 new_mean_mag=13.3443 delta=-0.13 (need > 0.90) Forced photometry filter REJECTED candidate at 01:48:58.97 -20:39:08.9: ref_mag=13.09 +/- 0.03 new_mean_mag=13.3492 delta=-0.26 (need > 0.90) make_report_in_HTML.sh Phase 1 (network queries): 1s Pre-generating preview images in parallel... Done pre-generating preview images. Pre-generating finding charts in parallel... Done pre-generating finding charts. make_report_in_HTML.sh Pre-generation: 0s xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Considering the candidate 37189_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487 The candidate 37189_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487 did not pass the final checks Discovery image 1   2026 09 03.42562    2461286.92562    13.38    02:03:56.47 -17:32:13.4   2294 2947   /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Discovery image 2   2026 09 03.42622    2461286.92622    13.31    02:03:56.46 -17:32:13.0   2300 2941   /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Considering the candidate 37191_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487 The candidate 37191_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487 did not pass the final checks Discovery image 1   2026 09 03.42562    2461286.92562    13.34    01:48:59.00 -20:39:09.4   4464 4799   /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-12-43_20.00sec_-0.00C_LIGHT_0486.fits Discovery image 2   2026 09 03.42622    2461286.92622    13.36    01:48:58.95 -20:39:08.5   4470 4793   /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Considering the candidate 30565_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487 The candidate 30565_fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487 did not pass the final checks Discovery image 3   2026 09 03.42622    2461286.92622    10.22    02:15:59.57 -20:31:08.5   0616 4817   /data_ssd/NMW-TexasTech/workdir//img_2026-09-03_CI_Cet-11-Q2b1x1_073752_TTUQ2b1x1_2320045_YpbLjFCU/fd_Cet-11-Q2b1x1_2026-09-03_05-13-35_20.00sec_0.00C_LIGHT_0487.fits **** FOUND 02:15:59.59 -20:31:08.5 in the exclusion list exclusion_list.txt **** make_report_in_HTML.sh Phase 2 (HTML assembly): 0s make_report_in_HTML.sh TOTAL: 1s Prepared the HTML report for the field Cet-11-Q2b1x1 with default.sex.telephoto_lens_vSTL *------ done with default.sex.telephoto_lens_vSTL ------* #### The local exclusion list is exclusion_list_local.txt #### ########### Completed Cet-11-Q2b1x1 ########### The analysis was running at tau We are allowed to update the exclusion list at tau host Found ../exclusion_list_TTUQ2.txt #### The exclusion list before filtering-out asteroids, bad pixels and adding Gaia sources #### ################################################################################### renamed 'exclusion_list_index_html.txt_noasteroids' -> 'exclusion_list_index_html.txt' renamed 'exclusion_list_index_html.txt_nohotpixels' -> 'exclusion_list_index_html.txt' # Count candidates with no identification (that also don't look like hot pix) Found 0 unidentified candidates (excluding asteroids, hot pixels and known variable stars). ################################################################################### 0 candidates found (excluding asteroids and hot pixels) This does not look like a test run ################################################################################### exclusion_list_gaiadr2.txt NOT FOUND exclusion_list_apass.txt NOT FOUND IS_THIS_TEST_RUN=NO ALLOW_EXCLUSION_LIST_UPDATE= YES #### Nothing to add to the exclusion list #### The observatory MPC code is V36 ############################################################ Positions of planets computed with util/planet_finder/main.py for JD(UT)2461286.92561554 -observatory V36 11:13:46.38 +06:29:52.2 Mercury (-1.2mag) 13:25:56.27 -13:00:15.5 Venus (-4.6mag) 07:03:28.06 +23:12:30.7 Mars (1.2mag) 09:05:50.12 +17:11:02.5 Jupiter (-1.8mag) 00:52:35.50 +02:44:47.3 Saturn (0.5mag) 04:13:36.78 +21:01:47.9 Uranus (5.7mag) 00:14:06.36 -00:00:47.4 Neptune (7.7mag) 20:25:52.18 -23:38:40.9 Pluto (14.5mag) 03:42:18.10 +24:50:41.9 Moon (-10.7mag) -rw-r--r-- 1 apache apache 363 Sep 3 07:39 planets.txt ############################################################ Positions of selected moons from JPL HORIZONS for JD(UT)2461286.92561554: 09:05:57.58 +17:10:27.0 Io (6.2mag) 09:05:51.11 +17:10:58.8 Europa (6.3mag) 09:05:40.23 +17:11:53.3 Ganymede (5.7mag) 09:05:38.33 +17:11:58.5 Callisto (6.9mag) 09:03:29.48 +17:25:44.8 Himalia (15.7mag) 09:05:51.06 +17:10:59.0 Thebe (16.6mag) 09:03:08.54 +17:19:59.6 Elara (17.7mag) 09:09:48.65 +16:39:50.4 Pasiphae (17.9mag) 09:07:11.91 +17:27:46.1 Carme (19.0mag) 00:52:47.03 +02:44:41.6 Titan (8.3mag) 00:52:32.51 +02:44:30.2 Rhea (9.6mag) 00:52:59.99 +02:47:29.5 Iapetus (11.0mag) 00:52:36.34 +02:44:03.4 Hyperion (14.3mag) 00:51:26.40 +02:34:54.0 Phoebe (16.4mag) -rw-r--r-- 1 apache apache 568 Sep 3 07:40 moons.txt ############################################################ Positions of selected spacecraft from JPL HORIZONS for JD(UT)2461286.92561554: 21:33:49.56 -02:58:20.9 JWST 13:51:46.02 +52:57:43.9 Chandra 12:19:51.29 -61:55:35.3 XMM-Newton -rw-r--r-- 1 apache apache 96 Sep 3 07:39 spacecraft.txt ############################################################ Positions of bright comets computed with util/comet_finder/main.py for JD(UT)2461286.92561554 -observatory V36 03:37:56.68 +19:09:04.3 17.4mag P/1996 R2 (Lagerkvist) 18:01:42.35 -34:16:51.6 14.3mag P/2010 H2 (Vales) 07:16:28.92 -70:05:30.4 17.3mag C/2014 UN271 (Bernardinelli-Bernstein) 06:15:12.20 +33:36:04.6 17.7mag C/2017 K2 (PANSTARRS) 04:45:21.27 +44:52:18.7 15.6mag P/2021 N1 (ZTF) 04:45:21.32 +44:52:18.6 15.6mag P/2021 N1 (ZTF) 22:16:36.92 +29:07:41.2 17.4mag C/2022 E2 (ATLAS) 07:07:10.04 +26:03:08.4 16.8mag C/2022 N2 (PANSTARRS) 10:45:55.34 +27:22:08.6 17.0mag C/2022 QE78 (ATLAS) 09:46:11.64 +05:15:11.8 18.0mag C/2022 R6 (PANSTARRS) 15:30:44.35 -15:18:30.3 14.8mag C/2023 R1 (PANSTARRS) 08:34:55.46 +32:39:40.8 15.7mag C/2024 E1 (Wierzchos) 15:06:10.47 +15:22:06.0 17.9mag C/2024 G6 (ATLAS) 18:36:15.24 +43:18:21.8 13.7mag C/2024 J3 (ATLAS) 20:31:34.67 +49:28:46.6 17.4mag C/2024 R4 (PANSTARRS) 05:33:27.29 -12:58:45.4 15.2mag C/2024 T5 (ATLAS) 07:10:11.68 +19:18:33.9 17.8mag C/2025 J1 (Borisov) 11:11:48.72 +19:04:04.3 16.9mag C/2025 V2 (Rankin) 13:16:29.72 +00:25:32.7 16.8mag C/2025 Y1 (ATLAS) 16:31:55.42 +74:38:35.1 16.2mag C/2026 A2 (Bok) 03:07:27.83 +46:14:11.5 17.4mag C/2026 B2 (Sun-Gao) 12:09:42.48 +10:57:51.1 17.5mag A/2026 E1 22:22:46.51 -34:40:38.0 13.3mag 10P/Tempel 11:45:35.58 -05:10:49.8 16.3mag 29P/Schwassmann-Wachmann 12:00:46.45 -03:51:51.9 17.6mag 63P/Wild 00:46:41.97 -06:49:22.0 15.4mag 65P/Gunn 06:31:43.47 +19:32:02.2 17.1mag 78P/Gehrels 03:16:46.32 +14:56:00.9 16.7mag 88P/Howell 05:25:30.13 +27:08:27.6 17.6mag 112P/Urata-Niijima 07:20:10.73 +25:46:14.2 17.9mag 114P/Wiseman-Skiff 10:19:12.49 +21:40:46.5 14.8mag 123P/West-Hartley 12:38:08.95 -19:58:38.9 17.4mag 124P/Mrkos 06:12:38.10 +20:45:10.4 15.9mag 128P/Shoemaker-Holt 23:54:18.61 +02:34:29.4 17.3mag 139P/Vaisala-Oterma 02:45:14.98 -17:59:00.8 15.4mag 161P/Hartley-IRAS 09:47:06.55 +16:30:46.3 12.0mag 169P/NEAT 03:20:51.62 +08:46:10.0 14.4mag 220P/McNaught 04:37:28.72 +35:04:38.2 15.2mag 260P/McNaught 08:21:22.09 +36:05:38.5 17.3mag 295P/LINEAR 15:22:48.33 +00:11:13.9 17.9mag 391P/Kowalski 09:24:25.29 +17:02:56.1 17.9mag 450P/LONEOS -rw-r--r-- 1 apache apache 2.0K Sep 3 07:39 comets.txt ############################################################ List of recent ASAS-SN transients from https://www.astronomy.ohio-state.edu/asassn/transients.html : 19:45:06.20 +18:22:48.80 V488 2026-08-30.13 9.37 18:25:12.74 -22:25:28.60 V8055 2026-08-30.22 10.89 17:17:45.96 +64:31:40.10 ASASSN-26ez 2026-08-25.13 10.87 19:02:47.09 +58:08:21.00 AT2026zwo 2026-08-24.16 15.78 04:20:07.58 -42:26:59.90 AT2026zjy 2026-08-23.03 15.91 03:08:18.02 +11:54:46.50 SN2026ymb 2026-08-23.4 16.44 20:22:32.48 -50:45:14.30 SN2026yid 2026-08-22.82 15.13 04:24:28.39 -56:20:21.60 ASASSN-26ey 2026-08-20.02 15.55 16:46:37.81 -63:14:59.80 ASASSN-26ex 2026-08-18.78 3.63 21:28:47.85 +20:31:03.60 SN 2026sfn 2026-08-16.3 17.09 23:01:28.67 -61:00:39.00 SN 2026yib 2026-08-14.85 17.36 00:22:23.20 -32:16:02.70 SN 2026whu 2026-08-14.96 16.5 19:56:21.71 -37:24:19.90 ASASSN-26ew 2026-08-13.82 14.73 13:53:14.21 +00:26:52.00 SN 2026wkv 2026-08-10.12 15.83 05:21:07.61 +23:38:20.10 TCP J05210763+2338194 2026-08-10.59 9.34 01:28:20.49 +40:13:27.10 SN2026wpd 2026-08-9.34 16.37 23:47:50.89 +49:28:51.30 SN2026wjs 2026-08-9.24 17.09 16:03:20.92 +17:43:23.70 AT2026xau 2026-08-9.3 17.71 01:10:22.05 -09:34:08.50 SN2026weo 2026-08-7.46 15.76 00:56:54.35 -35:55:29.40 AT2026wdy 2026-08-5.05 16.08 22:08:07.63 -53:03:58.90 AT2026wek 2026-08-3.82 17.17 14:51:51.34 +66:13:24.60 ASASSN-26ev 2026-08-2.15 14.02 12:06:50.79 -36:16:06.20 SN2026wgm 2026-08-1.73 15.61 16:56:36.90 -59:29:26.00 ASASSN-26er 2026-07-25.82 15.09 01:21:27.83 -10:37:05.00 SN2026vbh 2026-07-25.61 15.97 21:17:31.59 +22:25:50.90 ASASSN-26eq 2026-07-24.37 15.13 18:53:36.89 +16:56:43.60 ASASSN-26ep 2026-07-23.47 -4.06 12:18:47.98 -30:48:47.50 ASASSN-26et 2026-07-22.76 13.98 13:00:47.82 +15:42:17.60 SN2026uwk 2026-07-21.75 16.38 18:52:31.11 -32:28:00.90 ASASSN-26en 2026-07-21.77 14.63 14:42:58.01 -62:32:59.10 ASASSN-26es 2026-07-20.79 15.36 20:12:45.57 -32:53:13.00 ASASSN-26em 2026-07-20.94 16.83 18:54:24.33 -46:11:51.70 ASASSN-26eu 2026-07-20.93 14.86 03:18:56.99 -80:55:10.40 AT2026ugi 2026-07-20.03 17.12 18:43:58.40 +24:22:41.80 ASASSN-26eo 2026-07-19.36 16.16 04:50:01.03 -02:22:33.80 ASASSN-26ej 2026-07-16.17 17.02 18:34:55.28 -31:41:00.90 ASASSN-26ek 2026-07-16.24 15.73 17:07:43.61 -44:21:53.50 ASASSN-26el 2026-07-15.86 16.01 14:45:08.35 +24:13:12.30 ASASSN-26ei 2026-07-16.17 16.46 10:00:46.44 -32:36:31.10 AT 2023mhb 2026-07-14.73 16.67 14:39:37.45 -11:22:36.20 AT 2026unl 2026-07-15.27 17.11 10:49:42.57 -11:25:55.80 ASASSN-26eh 2026-07-14.72 16.58 19:33:53.06 -07:15:00.80 ASASSN-22le 2026-07-14.15 15.5 02:45:40.52 -27:55:30.30 ASASSN-26ef 2026-07-12.35 15.86 23:26:43.80 +04:42:39.70 SN 2026qtn 2026-07-12.22 16.47 02:19:17.26 +28:57:15.40 ASASSN-26ec 2026-07-11.53 2.78 18:31:15.56 -05:34:31.50 AT2026stb 2026-07-11.28 -1.29 13:36:08.24 +23:29:05.00 AT2026pjf 2026-07-10.18 -0.72 17:33:39.82 +04:22:36.70 SN2026pir 2026-07-9.86 -0.66 11:21:41.26 -50:33:36.30 ASASSN-26ed 2026-07-8.8 -1.3 23:41:42.11 +26:29:49.10 AT2026qil 2026-07-9.3 16.15 20:21:30.50 -32:03:40.10 ASASSN-26ee 2026-07-7.22 15.53 19:37:44.09 -05:35:42.80 AT2026ryu 2026-07-7.17 14.88 11:06:55.46 -04:07:04.50 AT2026qqg 2026-07-5.01 16.82 19:07:23.69 -74:13:37.30 AT2026qly 2026-07-5.02 17.31 17:57:43.80 +27:18:40.10 ASASSN-26ea 2026-07-5.07 16.67 19:59:01.43 -32:07:34.30 ASASSN-26eb 2026-07-4.97 15.52 18:46:50.35 -57:44:13.20 SN 2026qqp 2026-07-5.03 -0.92 19:17:31.69 -39:55:29.90 ASASSN-26dz 2026-07-5.14 15.91 19:14:31.37 +12:03:52.90 AT 2026rdg 2026-07-3.43 11.81 04:05:50.09 -70:24:34.40 AT 2026qpr 2026-06-30.4 15.96 13:45:37.49 -05:59:35.80 SN 2026pub 2026-06-30.09 16.01 16:41:15.63 +39:17:14.70 SN 2026pel 2026-06-26.38 16.07 10:14:40.19 -35:38:21.30 ASASSN-26dy 2026-06-25.99 15.63 14:47:21.56 -40:15:51.30 ASASSN-26dv 2026-06-23.03 14.62 13:38:49.79 -77:21:06.70 ASASSN-26dw 2026-06-23.04 16.09 00:59:27.90 +33:08:13.20 SN 2026mke 2026-06-22.39 17.13 11:10:44.73 -30:20:45.50 SN 2026nmv 2026-06-22.06 16.56 21:36:15.68 -21:19:12.50 AT2026oxh 2026-06-22.15 17.14 17:31:38.38 -56:05:51.90 ASASSN-26dx 2026-06-22.02 14.72 14:10:13.44 -38:46:46.10 AT2026pvk 2026-06-22.06 16.53 20:56:47.23 -18:31:05.20 AT2026plb 2026-06-21.31 16.4 15:44:29.68 +21:00:59.30 SN2026ore 2026-06-21.29 17.57 23:50:05.98 -14:01:41.30 AT2026oxl 2026-06-21.52 17.64 17:36:54.73 -18:10:04.20 AT2026ouj 2026-06-20.92 15.15 00:34:04.08 -30:22:09.20 AT2026ntk 2026-06-18.09 17.34 20:49:13.39 +25:17:59.20 ASASSN-26du 2026-06-15.39 15.93 23:09:30.84 +32:40:42.00 SN2026oxc 2026-06-14.35 16.83 02:02:26.78 +32:04:21.30 AT2026ovz 2026-06-14.59 15.39 21:26:28.11 -72:31:19.50 AT2026nwc 2026-06-11 17.05 17:54:57.33 +26:32:34.20 SN 2026odc 2026-06-11.23 17.62 13:55:59.94 +17:30:37.20 SN 2026nyq 2026-06-11.1 16.24 00:50:45.14 -71:38:36.90 ASASSN-26dt 2026-06-11.13 10.22 14:42:19.73 +19:11:35.60 SN2026nyp 2026-06-10.3 16.32 12:23:23.92 +12:56:43.50 SN2026mta 2026-06-8.29 16.69 12:30:18.51 +47:12:33.20 SN2026oao 2026-06-9.32 17.02 10:51:05.21 -42:28:56.60 AT2026nvf 2026-06-8.12 16.75 13:50:22.48 -07:35:00.00 SN2026npn 2026-06-8.02 17.58 00:56:07.17 +43:01:43.20 ASASSN-26dq 2026-06-7.43 13.58 01:07:49.46 +41:59:43.70 SN 2026obc 2026-06-7.43 15.15 21:11:25.22 +14:14:31.90 ASASSN-26dr 2026-06-7.24 16.24 06:21:27.06 -65:16:42.00 ASASSN-26ds 2026-06-2.97 15.02 20:07:38.15 -21:07:05.40 SN2026mho 2026-05-25.18 -1.12 11:29:42.55 +79:01:03.10 AT2026min 2026-05-24.21 16.63 11:44:33.11 -68:48:32.90 ASASSN-26no 2026-05-24.03 8.35 19:00:42.82 -48:31:01.60 ASASSN-26dp 2026-05-22.31 -3.28 14:23:56.59 -58:37:47.40 ASASSN-26dn 2026-05-20.01 14.59 11:24:54.06 +47:57:01.60 AT2026nma 2026-05-20.29 15.46 21:27:08.58 +33:24:38.10 AT2026lli 2026-05-19.34 15.86 00:31:01.41 -13:38:51.70 AT2026nad 2026-05-19.39 15.34 -rw-r--r-- 1 apache apache 5.7K Sep 3 07:39 asassn_transients_list.txt ############################################################ Truncated list of TOCP transients from http://www.cbat.eps.harvard.edu/unconf/tocp.html : 02:19:17.36 +28:57:15.8 TCP J02191736+2857158 2026-07-12.3549 12.5mag 00:44:56.43 +41:57:41.6 PNV J00445643+4157416 2026-07-13.8026 17.98Cmag 00:42:55.36 +41:17:27.0 PNV J00425536+4117270 2026-07-20.1813 17.7mag 20:35:43.64 +61:31:32.9 TCP J20354364+6131329 2026-07-20.5443 14.4mag 21:17:31.48 +22:25:51.0 TCP J21173148+2225510 2026-07-23.5577 14.8mag 00:41:24.04 +40:49:02.8 PNV J00412404+4049028 2026-07-25.0157 18.7mag 00:43:04.26 +41:02:28.6 PNV J00430426+4102286 2026-07-26.1512 20mag 14:51:51.40 +66:13:24.0 TCP J14515140+6613240 2026-07-29.2561 13.5mag 00:43:06.15 +41:22:08.2 PNV J00430615+4122082 2026-07-30.0085 19.4mag 00:41:33.23 +41:10:12.2 PNV J00413323+4110122 2026-08-02.8913 17.1mag 05:21:07.63 +23:38:19.4 TCP J05210763+2338194 2026-08-06.4109 11.2mag 22:57:17.96 +47:07:41.8 TCP J22571796+4707418 2026-08-09.3289 14.3mag 09:13:38.17 +76:28:18.1 PSN J09133817+7628181 2026-08-09.8037 15.4mag 00:43:17.29 +41:26:48.6 PNV J00431729+4126486 2026-08-14.0920 16.8mag 00:42:52.82 +41:10:58.6 PNV J00425282+4110586 2026-08-17.7723 19.9mag 00:42:52.83 +41:10:59.6 PNV J00425283+4110596 2026-08-18.6119 19.3mag 18:25:12.76 -22:25:29.3 TCP J18251276-2225293 2026-08-19.1062 9.4mag 18:03:09.04 +12:18:14.0 TCP J18030904+1218140 2026-08-19.5199 14.9mag 19:45:06.48 +18:22:42.2 PNV J19450648+1822422 2026-08-25.1278 9.0mag 00:42:54.65 +41:22:59.3 PNV J00425465+4122593 2026-08-25.4712 18.9mag -rw-r--r-- 1 apache apache 190K Sep 3 07:39 tocp_transients_list.txt ############################################################ Truncated list of recent TNS transients from https://www.wis-tns.org/ : 01:05:43.010 +44:35:34.60 AT 2026yer 2026-08-07.76 18.6 22:55:30.319 -22:02:48.22 AT 2026yeq 2026-08-06.66 20.14 02:37:46.699 -15:04:35.89 AT 2026yep 2026-08-06.73 20.06 22:30:16.021 -21:36:30.09 AT 2026yeo 2026-08-06.63 19.92 01:03:15.542 -48:59:20.71 AT 2026yen 2026-07-20.74 20.16 21:40:49.509 +03:49:04.95 AT 2026yem 2026-08-07.47 20.52 02:44:18.253 -15:40:32.00 AT 2026yel 2026-08-07.72 19.68 02:40:05.175 -07:47:40.58 AT 2026yek 2026-08-07.74 19.67 02:41:31.713 -05:42:07.66 AT 2026yej 2026-08-07.74 19.99 02:37:50.952 -34:56:23.02 AT 2026yei 2026-08-07.75 20.24 00:49:13.568 +35:33:39.77 AT 2026yeh 2026-08-07.46 18.6935 00:51:29.158 +58:43:46.50 AT 2026yeg 2026-06-27.59 18.302 23:39:55.450 +21:19:37.52 SN 2026yef 2026-08-07.52 18.408 02:33:45.113 +13:18:25.70 SN 2026yee 2026-08-07.60 19.123 23:58:58.059 +31:26:23.87 AT 2026yed 2026-08-07.54 19.075 00:30:10.856 +35:23:23.27 SN 2026yec 2026-08-07.55 18.551 21:31:13.865 -31:52:55.42 AT 2026yeb 2026-08-06.61 20.01 22:05:14.663 -13:18:47.83 AT 2026yea 2026-08-04.51 20.14 20:28:43.809 -29:28:49.69 AT 2026ydz 2026-08-03.55 19.71 22:22:26.994 -02:53:12.42 SN 2026ydy 2026-08-06.36 20.1587 -rw-r--r-- 1 apache apache 88K Sep 3 07:39 tns_transients_list.txt

Profiling:

CPU temperature: 84 C