This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 08 10.2539 2461262.7539 10.57 21:23:30.35 -14:16:48.6
36.87552 -40.06655 galactic Aqr Second-epoch detections are separated by 0.8" and 9.3 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.306 Unitas -0 -0 0 10.4 0 -0
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:23:30.35 -14:16:48.6: 15.39 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:23:30.35 -14:16:48.6: 15.42 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461262.7539,10.57,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260810.2539 10.57CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 10.2539 2461262.7539 10.74 21:44:06.25 -14:16:46.2
39.61264 -44.62939 galactic Cap Second-epoch detections are separated by 0.5" and 9.2 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.354 Eleonora 0 -0 0 10.5 -0 -0
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:44:06.25 -14:16:46.2: 15.26 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:44:06.25 -14:16:46.2: 15.17 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 08 10.2539* 21 44 06.25 -14 16 46.2 10.7 U Cap 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461262.7539,10.74,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260810.2539 10.74CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 10.2539 2461262.7539 11.30 21:18:11.14 -07:33:19.5
43.82883 -35.94832 galactic Aqr Second-epoch detections are separated by 0.7" and 9.4 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.389 Industria -0 0 0 11.6 0 0
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:18:11.14 -07:33:19.5: 15.53 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:18:11.14 -07:33:19.5: 15.59 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461262.7539,11.30,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260810.2539 11.30CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 10.2539 2461262.7539 12.58 21:15:41.49 -11:48:01.5
38.75877 -37.30774 galactic Aqr Second-epoch detections are separated by 1.0" and 9.3 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.38 Leda 0 -0 0 12.7 -0 -0
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:15:41.49 -11:48:01.5: 15.62 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:15:41.49 -11:48:01.5: 15.65 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461262.7539,12.58,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260810.2539 12.58CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 10.2539 2461262.7539 13.39 21:46:17.91 -10:18:46.7
44.89697 -43.37286 galactic Cap Second-epoch detections are separated by 2.1" and 8.9 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.286 Iclea 0 -1 1 13.5 -0 -0
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:46:17.91 -10:18:46.7: 15.54 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:46:17.91 -10:18:46.7: 15.49 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 08 10.2539* 21 46 17.91 -10 18 46.7 13.4 U Cap 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461262.7539,13.39,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260810.2539 13.39CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 08 10.2539 2461262.7539 12.97 21:16:55.81 -14:19:26.0
36.00069 -38.62370 galactic Aqr Second-epoch detections are separated by 1.9" and 9.2 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.558 Carmen 1 -1 1 13.0 0 -0
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:16:55.81 -14:19:26.0: 14.67 +/- 0.16 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:16:55.81 -14:19:26.0: 14.90 +/- 0.21 detection
Forced photometry reference-image weighted average: 14.76 +/- 0.13
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461262.7539,12.97,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260810.2539 12.97CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461209.88890352 18.06.2026 09:19:51.264 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
First image: 2461209.88890352 18.06.2026 09:19:51.264 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Last image: 2461262.75434497 10.08.2026 06:06:05.405 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 6
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.84
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 4 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 8620
Objects passed selection criteria: 8613
Measurements per detected object (mean, median, min, max): 3.3 4.0 2 4
Measurements per selected object (mean, median, min, max): 3.3 4.0 2 4
Average stars detected per image: 7450.25
Average stars matched: 7203.5 (96.688 %)
Memory usage VmPeak: 234688 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Aug 6 15:05:04 CDT 2026
VaST build number 1.0rc89-190-gdf2934b0
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-08-06)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Mon Aug 10 01:10:29 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461209.88890352 18.06.2026 09:19:51.264 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
First image: 2461209.88890352 18.06.2026 09:19:51.264 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Last image: 2461262.75434497 10.08.2026 06:06:05.405 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 17
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.56
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 18 seconds
Number of parallel threads: 3
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
VAST_SKIP_INDEX_VS_MAG is set - skipping the lib/index_vs_mag variability-index fitting
Total objects detected (at least 2 times): 47571
Objects passed selection criteria: 47493
Measurements per detected object (mean, median, min, max): 3.3 4.0 2 4
Measurements per selected object (mean, median, min, max): 3.3 4.0 2 4
Average stars detected per image: 42117
Average stars matched: 40480.8 (96.115 %)
Memory usage VmPeak: 270556 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Thu Aug 6 15:05:04 CDT 2026
VaST build number 1.0rc89-190-gdf2934b0
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-08-06)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Mon Aug 10 01:11:41 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ1b1x1/TTUQ1_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
SExtractor catalog cache: saved Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.cat to cache
SExtractor catalog cache: saved Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461262.75353477
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits exists and is non-empty
Saving wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits to local_wcs_cache/
'wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits' -> 'local_wcs_cache/wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits'
wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits exists and is non-empty
Saving wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits to local_wcs_cache/
'wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits' -> 'local_wcs_cache/wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits'
wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits exists and is non-empty
Saving wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits to local_wcs_cache/
'wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits' -> 'local_wcs_cache/wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits'
wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits exists and is non-empty
Saving wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits to local_wcs_cache/
'wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits' -> 'local_wcs_cache/wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits'
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits (1st reference image)
verification OK: wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Image size: 937.4'x624.3' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 21:25:43.484 -09:59:39.66 J2000 4789.000 3195.000
###################################
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits (1st new image)
verification OK: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
Image size: 940.8'x626.6' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.89"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 21:25:52.202 -09:59:25.54 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 21:25:43.484 -09:59:39.66
Second-epoch image center 21:25:52.202 -09:59:25.54
Angular distance between the image centers 0.0360 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits (2nd new image)
verification OK: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Image size: 940.8'x626.6' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.89"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 21:25:55.075 -09:58:50.52 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 21:25:43.484 -09:59:39.66
Second-epoch image center 21:25:55.075 -09:58:50.52
Angular distance between the image centers 0.0495 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 21:25:52.202 -09:59:25.54
Second-epoch second image center 21:25:55.075 -09:58:50.52
Angular distance between the image centers 0.01528 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits &> /tmp/tmp.mHZwz6L3VK
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits &> /tmp/tmp.slM6JctvS3
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits &> /tmp/tmp.OwLtoARLTN
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits &> /tmp/tmp.bXoTt86ELA
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Calibrating the magnitude scale
Found non-empty wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits and wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits and wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
Found non-empty wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits and wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
The reference image (wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits) and catalog (wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat) found
'wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat' -> 'wcsmag.cat'
Read 8874 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 313.3905 to 329.4911 deg, Dec -15.2504 to -4.7005 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 313.3905 to 329.4911 deg, Dec -15.2504 to -4.7005 deg
Loaded 6721 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5451 out of 5615 total matches.
Matched with Tycho-2 5615 out of 8874 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.692700
a=0.000000 b=1.000000 c=22.692700
From vast_summary.log: estimated ref. image limiting mag.: -7.84
Updating vast_summary.log: Estimated ref. image limiting mag.: 14.85
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 14.85
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 8874 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 313.3905 to 329.4911 deg, Dec -15.2504 to -4.7005 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 313.3905 to 329.4911 deg, Dec -15.2504 to -4.7005 deg
Loaded 6721 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5451 out of 5615 total matches.
Matched with Tycho-2 5615 out of 8874 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Forced-photometry filter: calibrated wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits -> calib.txt_param_ref_wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits (aperture=6.4)
Read 9225 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 313.3619 to 329.4904 deg, Dec -15.2503 to -4.7004 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 313.3619 to 329.4904 deg, Dec -15.2503 to -4.7004 deg
Loaded 6736 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5526 out of 5688 total matches.
Matched with Tycho-2 5688 out of 9225 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
Forced-photometry filter: calibrated wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits -> calib.txt_param_ref_wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits (aperture=6.6)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 6 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.3 pix Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
2.4 pix Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
3.2 pix fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
3.2 pix fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Limiting magnitude estimates:
14.9 mag. Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
14.9 mag. Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
14.1 mag. fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
14.1 mag. fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
All-image limiting magnitude estimate: 14.1 (SNR ) 11.5 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.mHZwz6L3VK (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits' -> 'wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
WCS_IMAGE_NAME=wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
WCS-calibrated image found: wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Checking if the catalog wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat corresponding to the image wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits alredy exist and is non-empty...
Catalog wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat corresponding to the image wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
WCS catalog name: wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=515, bad_region=0, passed=8874
Got 8874 stars (including 8351 good ones) from the SExtractor catalog wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
util/solve_plate_with_UCAC5 got 8874 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.4'
Seting catalog search parameters based on the expected field of view 937.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013019 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010416 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4740 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4713 matched stars entering correct_measured_positions(), 4713 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4713 matched stars entering correct_measured_positions(), 8874 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4741 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4713 matched stars entering correct_measured_positions(), 8874 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Accuracy estimation diagnostic: 4713 matched stars entering correct_measured_positions(), 8874 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Excluding outliers - 4713 stars left (next iteration limit 5184)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits N_match=4713 sigma_overall_arcsec=0.360 sigma_q1_arcsec=0.311 sigma_q2_arcsec=0.446 sigma_q3_arcsec=0.359 sigma_q4_arcsec=0.381 n_q1=1329 n_q2=1012 n_q3=1266 n_q4=1106 worst_quadrant_to_overall_ratio=1.239
The image catalog is written to wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits -region wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.slM6JctvS3 (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits' -> 'wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
WCS_IMAGE_NAME=wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
WCS-calibrated image found: wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
Checking if the catalog wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat corresponding to the image wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits alredy exist and is non-empty...
Catalog wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat corresponding to the image wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
WCS catalog name: wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=511, bad_region=0, passed=9225
Got 9225 stars (including 8705 good ones) from the SExtractor catalog wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat
util/solve_plate_with_UCAC5 got 9225 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4738 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4710 matched stars entering correct_measured_positions(), 4710 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4710 matched stars entering correct_measured_positions(), 9225 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4738 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4709 matched stars entering correct_measured_positions(), 9225 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
Accuracy estimation diagnostic: 4709 matched stars entering correct_measured_positions(), 9225 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.40"
Excluding outliers - 4709 stars left (next iteration limit 5181)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: util/identify.sh trusts the WCS of wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits (astrometrynet) - keeping it, no refit (set VAST_FORCE_SIP_REFIT=1 to refit anyway)
WCS_QUALITY_DIAG: file=Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits N_match=4709 sigma_overall_arcsec=0.453 sigma_q1_arcsec=0.318 sigma_q2_arcsec=0.618 sigma_q3_arcsec=0.369 sigma_q4_arcsec=0.585 n_q1=1094 n_q2=1301 n_q3=996 n_q4=1318 worst_quadrant_to_overall_ratio=1.362
The image catalog is written to wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits -region wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.OwLtoARLTN (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
WCS_IMAGE_NAME=wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
WCS-calibrated image found: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
Checking if the catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat corresponding to the image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits alredy exist and is non-empty...
Catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat corresponding to the image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
WCS catalog name: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=301, bad_region=0, passed=5945
Got 5945 stars (including 5640 good ones) from the SExtractor catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat
util/solve_plate_with_UCAC5 got 5945 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 940.8'
Seting catalog search parameters based on the expected field of view 940.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013067 (47.0 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010453 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4744 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4717 matched stars entering correct_measured_positions(), 4717 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4717 matched stars entering correct_measured_positions(), 5945 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4745 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4714 matched stars entering correct_measured_positions(), 5945 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Accuracy estimation diagnostic: 4713 matched stars entering correct_measured_positions(), 5945 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Excluding outliers - 4713 stars left (next iteration limit 5188)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=4713 robust_rms=9.227 arcsec worst_quadrant_rms=16.404 arcsec
SIP_REFIT: SIP order 3 trial: matched=4713 robust_rms=0.396 arcsec worst_quadrant_rms=0.416 arcsec
SIP_REFIT: SIP order 5 trial: matched=4713 robust_rms=0.307 arcsec worst_quadrant_rms=0.372 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4713 robust_rms_before=0.848 arcsec robust_rms_before_corrected=0.317 arcsec robust_rms_after=0.307 arcsec worst_quadrant_rms_before=0.392 worst_quadrant_rms_after=0.372
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.392 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits N_match=4713 sigma_overall_arcsec=0.310 sigma_q1_arcsec=0.370 sigma_q2_arcsec=0.390 sigma_q3_arcsec=0.261 sigma_q4_arcsec=0.253 n_q1=1318 n_q2=952 n_q3=1391 n_q4=1052 worst_quadrant_to_overall_ratio=1.258
The image catalog is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits -region wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.bXoTt86ELA (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
WCS_IMAGE_NAME=wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
WCS-calibrated image found: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Checking if the catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat corresponding to the image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits alredy exist and is non-empty...
Catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat corresponding to the image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
WCS catalog name: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=296, bad_region=0, passed=5924
Got 5924 stars (including 5625 good ones) from the SExtractor catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat
util/solve_plate_with_UCAC5 got 5924 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 940.8'
Seting catalog search parameters based on the expected field of view 940.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013067 (47.0 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010453 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4733 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4703 matched stars entering correct_measured_positions(), 4703 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4703 matched stars entering correct_measured_positions(), 5924 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4735 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4702 matched stars entering correct_measured_positions(), 5924 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Accuracy estimation diagnostic: 4702 matched stars entering correct_measured_positions(), 5924 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Excluding outliers - 4702 stars left (next iteration limit 5173)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: SIP order 2 trial: matched=4702 robust_rms=9.090 arcsec worst_quadrant_rms=16.618 arcsec
SIP_REFIT: SIP order 3 trial: matched=4702 robust_rms=0.400 arcsec worst_quadrant_rms=0.429 arcsec
SIP_REFIT: SIP order 5 trial: matched=4702 robust_rms=0.320 arcsec worst_quadrant_rms=0.381 arcsec
SIP_REFIT: selected SIP order 5
SIP_REFIT: order=5 matched=4702 robust_rms_before=0.851 arcsec robust_rms_before_corrected=0.320 arcsec robust_rms_after=0.320 arcsec worst_quadrant_rms_before=0.397 worst_quadrant_rms_after=0.381
SIP_REFIT: refit does not sufficiently improve on the solution it would replace (best worst-quadrant baseline 0.397 arcsec) - keeping the original
WCS_QUALITY_DIAG: file=fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits N_match=4702 sigma_overall_arcsec=0.316 sigma_q1_arcsec=0.390 sigma_q2_arcsec=0.380 sigma_q3_arcsec=0.271 sigma_q4_arcsec=0.257 n_q1=1313 n_q2=954 n_q3=1402 n_q4=1033 worst_quadrant_to_overall_ratio=1.234
The image catalog is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits -region wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits sigma_overall=0.360 worst_q_ratio=1.239
ref2=Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits sigma_overall=0.453 worst_q_ratio=1.362
new1=fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits sigma_overall=0.310 worst_q_ratio=1.258
new2=fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits sigma_overall=0.316 worst_q_ratio=1.234
reference average sigma_overall=0.4065 worst_q_ratio=1.3005
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387_astrometric_residuals.png (4713 matched stars from wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.31 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198_astrometric_residuals.png (4709 matched stars from wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.39 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218_astrometric_residuals.png (4713 matched stars from wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.28 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219_astrometric_residuals.png (4702 matched stars from wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.29 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits'
Saving fully-calibrated image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits'
Preparing the HTML report for the field Aqr-03-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 20:56:35.48 -05:59:51.3: 11.64 +/- 0.01 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:18:11.14 -07:33:19.5: 15.53 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 20:59:16.27 -10:15:23.3: 10.44 +/- 0.00 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:44:06.25 -14:16:46.2: 15.26 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:23:30.35 -14:16:48.6: 15.39 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:44:06.25 -14:16:46.2: 15.17 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 20:59:16.27 -10:15:23.3: 10.44 +/- 0.00 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:18:11.14 -07:33:19.5: 15.59 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 20:56:35.48 -05:59:51.3: 11.55 +/- 0.01 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:23:30.35 -14:16:48.6: 15.42 +/- 99.00 upperlimit
Forced photometry reference-image weighted average: 10.44 +/- 0.00
Forced photometry reference-image weighted average: 11.59 +/- 0.01
Forced photometry filter REJECTED candidate at 20:59:16.27 -10:15:23.3: ref_mag=10.44 +/- 0.00 new_mean_mag=10.8348 delta=-0.39 (need > 0.90)
Forced photometry filter REJECTED candidate at 20:56:35.48 -05:59:51.3: ref_mag=11.59 +/- 0.01 new_mean_mag=11.5120 delta=0.07 (need > 0.90)
Adding exclusion_list_local.txt__out20809.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out20820.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out20890.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 7s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 3s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20754_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 20754_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20755_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 20755_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20809_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
Preparing report for the candidate 20809_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20820_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
Preparing report for the candidate 20820_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20890_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
Preparing report for the candidate 20890_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20022_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 20022_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
**** FOUND 21:02:32.69 -06:36:21.6 in the exclusion list exclusion_list.txt ****
make_report_in_HTML.sh Phase 2 (HTML assembly): 0s
make_report_in_HTML.sh TOTAL: 10s
Prepared the HTML report for the field Aqr-03-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
21:23:30.35 -14:16:48.6
21:44:06.25 -14:16:46.2
21:18:11.14 -07:33:19.5
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
SExtractor catalog cache: saved Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.cat to cache
SExtractor catalog cache: saved Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Creating symlink local_wcs_cache/wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
Creating symlink local_wcs_cache/wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
Creating symlink local_wcs_cache/wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Creating symlink local_wcs_cache/exclusion_list.txt
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits exists and is non-empty
wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits exists and is non-empty
wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits exists and is non-empty
wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits (1st reference image)
verification OK: wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Image size: 937.4'x624.3' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 21:25:43.484 -09:59:39.66 J2000 4789.000 3195.000
###################################
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits (1st new image)
verification OK: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
Image size: 940.8'x626.6' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.89"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 21:25:52.202 -09:59:25.54 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 21:25:43.484 -09:59:39.66
Second-epoch image center 21:25:52.202 -09:59:25.54
Angular distance between the image centers 0.0360 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits (2nd new image)
verification OK: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Image size: 940.8'x626.6' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.89"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 21:25:55.075 -09:58:50.52 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 21:25:43.484 -09:59:39.66
Second-epoch image center 21:25:55.075 -09:58:50.52
Angular distance between the image centers 0.0495 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 21:25:52.202 -09:59:25.54
Second-epoch second image center 21:25:55.075 -09:58:50.52
Angular distance between the image centers 0.01528 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits &> /tmp/tmp.Oosbnr2AEC
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits &> /tmp/tmp.AhlFtP7zMQ
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits &> /tmp/tmp.iTr34yei43
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits &> /tmp/tmp.EtpFUHJVNr
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Calibrating the magnitude scale
Found non-empty wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits and wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits and wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
Found non-empty wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits and wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
The reference image (wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits) and catalog (wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat) found
'wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat' -> 'wcsmag.cat'
Read 53069 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 313.3814 to 329.5453 deg, Dec -15.2618 to -4.6695 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 313.3814 to 329.5453 deg, Dec -15.2618 to -4.6695 deg
Loaded 6771 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5405 out of 5966 total matches.
Matched with Tycho-2 5966 out of 53069 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.562200
a=0.000000 b=1.000000 c=22.562200
From vast_summary.log: estimated ref. image limiting mag.: -7.56
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.00
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.00
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 53069 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 313.3814 to 329.5453 deg, Dec -15.2618 to -4.6695 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 313.3814 to 329.5453 deg, Dec -15.2618 to -4.6695 deg
Loaded 6771 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5405 out of 5966 total matches.
Matched with Tycho-2 5966 out of 53069 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00001.cat.aperture for wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Forced-photometry filter: calibrated wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits -> calib.txt_param_ref_wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits (aperture=5.0)
Read 51567 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 313.3495 to 329.5140 deg, Dec -15.2503 to -4.6788 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 313.3495 to 329.5140 deg, Dec -15.2503 to -4.6788 deg
Loaded 6759 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5424 out of 5938 total matches.
Matched with Tycho-2 5938 out of 51567 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits:
Forced-photometry filter: reusing the VaST-run aperture from image00002.cat.aperture for wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
Forced-photometry filter: calibrated wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits -> calib.txt_param_ref_wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits (aperture=5.2)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 15 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.2 pix Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
2.3 pix Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
2.9 pix fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
2.9 pix fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Limiting magnitude estimates:
15.0 mag. Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
15.0 mag. Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
14.2 mag. fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
14.2 mag. fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
All-image limiting magnitude estimate: 14.2 (SNR ) 13.7 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.Oosbnr2AEC (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits' -> 'wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
WCS_IMAGE_NAME=wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
WCS-calibrated image found: wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
Checking if the catalog wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat corresponding to the image wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits alredy exist and is non-empty...
Catalog wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat corresponding to the image wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits
WCS catalog name: wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=18, blended=2577, bad_region=1, passed=53051
Got 53051 stars (including 50399 good ones) from the SExtractor catalog wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat
util/solve_plate_with_UCAC5 got 53051 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.4'
Seting catalog search parameters based on the expected field of view 937.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013019 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010416 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4728 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4711 matched stars entering correct_measured_positions(), 4711 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4711 matched stars entering correct_measured_positions(), 53051 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4728 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4710 matched stars entering correct_measured_positions(), 53051 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Accuracy estimation diagnostic: 4710 matched stars entering correct_measured_positions(), 53051 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Excluding outliers - 4710 stars left (next iteration limit 5182)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits N_match=4710 sigma_overall_arcsec=0.353 sigma_q1_arcsec=0.315 sigma_q2_arcsec=0.423 sigma_q3_arcsec=0.355 sigma_q4_arcsec=0.371 n_q1=1352 n_q2=1001 n_q3=1239 n_q4=1118 worst_quadrant_to_overall_ratio=1.199
The image catalog is written to wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits -region wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.AhlFtP7zMQ (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits' -> 'wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits'
This WCS solution (astrometrynet) will be kept as is, not refit by util/solve_plate_with_UCAC5
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
WCS_IMAGE_NAME=wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
WCS-calibrated image found: wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
Checking if the catalog wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat corresponding to the image wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits alredy exist and is non-empty...
Catalog wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat corresponding to the image wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits
WCS catalog name: wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=17, blended=3043, bad_region=1, passed=51550
Got 51550 stars (including 48424 good ones) from the SExtractor catalog wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat
util/solve_plate_with_UCAC5 got 51550 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.1'
Seting catalog search parameters based on the expected field of view 937.1 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013015 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010412 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4720 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4700 matched stars entering correct_measured_positions(), 4700 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4700 matched stars entering correct_measured_positions(), 51550 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 4720 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4700 matched stars entering correct_measured_positions(), 51550 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Accuracy estimation diagnostic: 4700 matched stars entering correct_measured_positions(), 51550 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Excluding outliers - 4700 stars left (next iteration limit 5170)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits N_match=4700 sigma_overall_arcsec=0.449 sigma_q1_arcsec=0.325 sigma_q2_arcsec=0.622 sigma_q3_arcsec=0.373 sigma_q4_arcsec=0.566 n_q1=1120 n_q2=1278 n_q3=1031 n_q4=1271 worst_quadrant_to_overall_ratio=1.385
The image catalog is written to wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits -region wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.iTr34yei43 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
WCS_IMAGE_NAME=wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
WCS-calibrated image found: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
Checking if the catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat corresponding to the image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits alredy exist and is non-empty...
Catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat corresponding to the image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
WCS catalog name: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=7, blended=1189, bad_region=5, passed=32632
Got 32632 stars (including 31385 good ones) from the SExtractor catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat
util/solve_plate_with_UCAC5 got 32632 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 940.8'
Seting catalog search parameters based on the expected field of view 940.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013067 (47.0 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010453 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4742 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4719 matched stars entering correct_measured_positions(), 4720 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4719 matched stars entering correct_measured_positions(), 32632 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4744 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4719 matched stars entering correct_measured_positions(), 32632 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Accuracy estimation diagnostic: 4719 matched stars entering correct_measured_positions(), 32632 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Excluding outliers - 4719 stars left (next iteration limit 5190)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits N_match=4719 sigma_overall_arcsec=0.314 sigma_q1_arcsec=0.369 sigma_q2_arcsec=0.383 sigma_q3_arcsec=0.279 sigma_q4_arcsec=0.270 n_q1=1277 n_q2=938 n_q3=1430 n_q4=1074 worst_quadrant_to_overall_ratio=1.220
The image catalog is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits -region wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.EtpFUHJVNr (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
WCS_IMAGE_NAME=wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
WCS-calibrated image found: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Checking if the catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat corresponding to the image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits alredy exist and is non-empty...
Catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat corresponding to the image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
WCS catalog name: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=6, blended=1219, bad_region=7, passed=32508
Got 32508 stars (including 31240 good ones) from the SExtractor catalog wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat
util/solve_plate_with_UCAC5 got 32508 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 940.8'
Seting catalog search parameters based on the expected field of view 940.8 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013067 (47.0 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010453 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4732 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4711 matched stars entering correct_measured_positions(), 4711 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 4711 matched stars entering correct_measured_positions(), 32508 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
UCAC5 local query limit 5000: matching up to 5000 detected stars, deepening the UCAC5 window to mag 15.50
Reading UCAC5 zone files...
Searching UCAC5 zones 372 to 430 (Dec -15.6 to -4.2)
Done reading UCAC5 zone files...
Matched 4735 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 4712 matched stars entering correct_measured_positions(), 32508 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Accuracy estimation diagnostic: 4712 matched stars entering correct_measured_positions(), 32508 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Excluding outliers - 4712 stars left (next iteration limit 5182)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
SIP_REFIT: wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits is a symbolic link - not rewriting the WCS of whatever it points to, keeping the original solution
WCS_QUALITY_DIAG: file=fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits N_match=4712 sigma_overall_arcsec=0.314 sigma_q1_arcsec=0.382 sigma_q2_arcsec=0.379 sigma_q3_arcsec=0.274 sigma_q4_arcsec=0.262 n_q1=1275 n_q2=941 n_q3=1430 n_q4=1066 worst_quadrant_to_overall_ratio=1.216
The image catalog is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits -region wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-04-55_20.00sec_-0.00C_LIGHTs_0218.fits
Saving fully-calibrated image wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-08-10_CI_Aqr-03-Q1b1x1_010757_TTUQ1b1x1_3956322_aj3bneuy/wcs_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219.fits
Preparing the HTML report for the field Aqr-03-Q1b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:46:17.91 -10:18:46.7: 15.54 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:08:45.83 -12:53:13.7: 12.65 +/- 0.03 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 20:57:56.18 -08:21:40.7: 13.07 +/- 0.04 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:15:41.49 -11:48:01.5: 15.62 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:07:12.04 -09:46:39.6: 13.37 +/- 0.05 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:00:28.74 -05:46:33.2: 13.38 +/- 0.06 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:30:05.33 -07:17:15.6: 13.65 +/- 0.07 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 20:59:37.22 -05:00:57.0: 14.30 +/- 0.13 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-06-18_04-19-51_20.00sec_5.00C_LIGHT_0387.fits at 21:16:55.81 -14:19:26.0: 14.67 +/- 0.16 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 20:57:56.18 -08:21:40.7: 13.19 +/- 0.04 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:07:12.04 -09:46:39.6: 13.51 +/- 0.05 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:46:17.91 -10:18:46.7: 15.49 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:15:41.49 -11:48:01.5: 15.65 +/- 99.00 upperlimit
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:00:28.74 -05:46:33.2: 13.84 +/- 0.08 detection
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:30:05.33 -07:17:15.6: 13.60 +/- 0.06 detection
Forced photometry reference-image weighted average: 13.13 +/- 0.03
Forced photometry reference-image weighted average: 13.43 +/- 0.04
Forced photometry filter REJECTED candidate at 20:57:56.18 -08:21:40.7: ref_mag=13.13 +/- 0.03 new_mean_mag=13.1204 delta=0.01 (need > 0.90)
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:08:45.83 -12:53:13.7: 12.76 +/- 0.03 detection
Forced photometry reference-image weighted average: 13.62 +/- 0.04
Forced photometry filter REJECTED candidate at 21:07:12.04 -09:46:39.6: ref_mag=13.43 +/- 0.04 new_mean_mag=13.3759 delta=0.06 (need > 0.90)
Forced photometry reference-image weighted average: 13.55 +/- 0.05
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 20:59:37.22 -05:00:57.0: 14.52 +/- 0.15 detection
Forced photometry reference-image weighted average: 12.70 +/- 0.02
Forced photometry filter REJECTED candidate at 21:08:45.83 -12:53:13.7: ref_mag=12.70 +/- 0.02 new_mean_mag=12.8649 delta=-0.16 (need > 0.90)
Forced photometry filter REJECTED candidate at 21:00:28.74 -05:46:33.2: ref_mag=13.55 +/- 0.05 new_mean_mag=13.6065 delta=-0.05 (need > 0.90)
Forced photometry filter REJECTED candidate at 21:30:05.33 -07:17:15.6: ref_mag=13.62 +/- 0.04 new_mean_mag=13.7842 delta=-0.16 (need > 0.90)
Forced photometry reference-image weighted average: 14.39 +/- 0.10
Forced photometry filter REJECTED candidate at 20:59:37.22 -05:00:57.0: ref_mag=14.39 +/- 0.10 new_mean_mag=14.0969 delta=0.30 (need > 0.90)
Forced photometry on wcs_Aqr-03-Q1b1x1_2026-07-17_03-50-11_20.00sec_5.00C_LIGHT_0198.fits at 21:16:55.81 -14:19:26.0: 14.90 +/- 0.21 detection
Forced photometry reference-image weighted average: 14.76 +/- 0.13
Forced photometry filter KEPT candidate at 21:16:55.81 -14:19:26.0: ref_mag=14.76 +/- 0.13 new_mean_mag=12.9648 delta=1.79 (need > 0.90)
Adding exclusion_list_local.txt__out03648.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out68552.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out68964.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 10s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 2s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 68126_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 68126_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 68127_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 68127_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 68188_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 68188_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
**** FOUND 21:23:30.35 -14:16:48.6 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 68200_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 68200_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
**** FOUND 21:44:06.25 -14:16:46.2 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 68253_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 68253_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
**** FOUND 21:18:11.13 -07:33:19.5 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 68552_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
Preparing report for the candidate 68552_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 68902_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 68902_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
**** FOUND 21:44:59.97 -09:03:18.1 in the exclusion list exclusion_list_bsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 68947_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 68947_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 68964_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
Preparing report for the candidate 68964_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 69030_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 69030_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
**** FOUND 20:55:09.05 -12:20:47.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 69092_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 69092_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 69125_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 69125_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 69193_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 69193_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 65100_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219
The candidate 65100_fd_Aqr-03-Q1b1x1_2026-08-10_01-06-05_20.00sec_-0.00C_LIGHTs_0219 did not pass the final checks
