This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 07 16.2424 2461237.7424 13.43 14:58:36.28 +13:16:49.3
14.31128 57.24372 galactic Boo Second-epoch detections are separated by 1.7" and 10.1 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.148 Gallia 1 -1 1 13.4 0 -0
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 14:58:36.28 +13:16:49.3: 16.25 +/- 99.00 upperlimit
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 14:58:36.28 +13:16:49.3: 16.03 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461237.7424,13.43,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260716.2424 13.43CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 07 16.2424 2461237.7424 13.22 15:15:48.45 +15:45:59.0
21.68085 54.68755 galactic Ser Second-epoch detections are separated by 0.3" and 10.0 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was not found in astcheck.
online_id | target | 15:15:48.45 +15:45:59.0 (user input) | T | P | (position from user input) J-Ks=0.346+/-0.034 (G)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:15:48.45 +15:45:59.0: 14.19 +/- 0.06 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:15:48.45 +15:45:59.0: 14.13 +/- 0.07 detection
Forced photometry reference-image weighted average: 14.16 +/- 0.05
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 07 16.2424* 15 15 48.45 +15 45 59.0 13.2 U Ser 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
target,2461237.7424,13.22,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
target 20260716.2424 13.22CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 07 16.2424 2461237.7424 13.53 15:06:30.43 +17:07:08.0
22.23995 57.27677 galactic Boo Second-epoch detections are separated by 1.0" and 10.2 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was not found in astcheck.
online_id | target | 15:06:30.43 +17:07:08.0 (user input) | T | P | (position from user input) J-Ks=0.385+/-0.035 (G)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:06:30.43 +17:07:08.0: 14.52 +/- 0.07 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:06:30.43 +17:07:08.0: 14.49 +/- 0.09 detection
Forced photometry reference-image weighted average: 14.51 +/- 0.06
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
target,2461237.7424,13.53,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
target 20260716.2424 13.53CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 07 16.2424 2461237.7424 13.30 15:08:33.35 +09:08:30.4
10.40907 52.98731 galactic Boo Second-epoch detections are separated by 0.3" and 10.3 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was not found in astcheck.
online_id | target | 15:08:33.35 +09:08:30.4 (user input) | T | P | (position from user input) SpType: K7 (LAMOST DR5) J-Ks=0.841+/-0.035 (M)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:08:33.35 +09:08:30.4: 14.51 +/- 0.09 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:08:33.35 +09:08:30.4: 14.49 +/- 0.10 detection
Forced photometry reference-image weighted average: 14.50 +/- 0.07
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
target,2461237.7424,13.30,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
target 20260716.2424 13.30CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 07 16.2424 2461237.7424 13.37 15:11:50.22 +16:14:24.1
21.73472 55.75235 galactic Ser Second-epoch detections are separated by 1.1" and 9.9 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was not found in astcheck.
online_id | target | 15:11:50.22 +16:14:24.1 (user input) | T | P | (position from user input) J-Ks=0.662+/-0.030 (K)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:11:50.22 +16:14:24.1: 14.37 +/- 0.07 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:11:50.22 +16:14:24.1: 14.28 +/- 0.07 detection
Forced photometry reference-image weighted average: 14.33 +/- 0.05
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 07 16.2424* 15 11 50.22 +16 14 24.1 13.4 U Ser 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
target,2461237.7424,13.37,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
target 20260716.2424 13.37CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 07 16.2424 2461237.7424 13.10 15:16:01.12 +16:23:39.9
22.70868 54.90175 galactic Ser Second-epoch detections are separated by 1.0" and 10.2 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was not found in astcheck.
online_id | ATO J229.0044+16.3961 | 15:16:01.12 +16:23:39.9 (user input) | dubious (ATLAS) | (ATLAS) | (position from user input) J-Ks=0.329+/-0.039 (G)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:16:01.12 +16:23:39.9: 14.03 +/- 0.05 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:16:01.12 +16:23:39.9: 14.02 +/- 0.06 detection
Forced photometry reference-image weighted average: 14.03 +/- 0.04
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 07 16.2424* 15 16 01.12 +16 23 39.9 13.1 U Ser 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
ATO J229.0044+16.3961,2461237.7424,13.10,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
ATO J229.0044+16.3961 20260716.2424 13.10CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461172.82001713 12.05.2026 07:40:39.480 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
First image: 2461172.82001713 12.05.2026 07:40:39.480 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
Last image: 2461237.74266491 16.07.2026 05:49:16.248 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 3
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.49
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 4 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
Total objects detected (at least 2 times): 6349
Objects passed selection criteria: 6337
Measurements per detected object (mean, median, min, max): 3.1 3.0 2 4
Measurements per selected object (mean, median, min, max): 3.1 3.0 2 4
Average stars detected per image: 5170.5
Average stars matched: 5067.25 (98.0031 %)
Memory usage VmPeak: 115868 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Wed Jul 15 19:22:19 CDT 2026
VaST build number 1.0rc89-155-g87a29d73
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-07-15)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Thu Jul 16 04:30:37 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461172.82001713 12.05.2026 07:40:39.480 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
First image: 2461172.82001713 12.05.2026 07:40:39.480 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
Last image: 2461237.74266491 16.07.2026 05:49:16.248 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 23
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.18
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 21 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
Total objects detected (at least 2 times): 36246
Objects passed selection criteria: 36160
Measurements per detected object (mean, median, min, max): 3.1 3.0 2 4
Measurements per selected object (mean, median, min, max): 3.1 3.0 2 4
Average stars detected per image: 30697.8
Average stars matched: 30058.2 (97.9168 %)
Memory usage VmPeak: 144232 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Wed Jul 15 19:22:19 CDT 2026
VaST build number 1.0rc89-155-g87a29d73
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-07-15)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Thu Jul 16 04:32:31 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ1b1x1/TTUQ1_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --norotation --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
SExtractor catalog cache: saved Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.cat to cache
SExtractor catalog cache: saved Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461237.74204984
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits exists and is non-empty
Saving wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits to local_wcs_cache/
'wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits' -> 'local_wcs_cache/wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits'
wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits exists and is non-empty
Saving wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits to local_wcs_cache/
'wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits' -> 'local_wcs_cache/wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits'
wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits exists and is non-empty
Saving wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits to local_wcs_cache/
'wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits' -> 'local_wcs_cache/wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits'
wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits exists and is non-empty
Saving wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits to local_wcs_cache/
'wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits' -> 'local_wcs_cache/wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits'
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits (1st reference image)
verification OK: wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
Image size: 941.4'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 15:06:31.559 +14:00:32.46 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits (1st new image)
verification OK: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
Image size: 941.2'x626.6' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 15:06:50.067 +13:59:36.69 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 15:06:31.559 +14:00:32.46
Second-epoch image center 15:06:50.067 +13:59:36.69
Angular distance between the image centers 0.0764 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits (2nd new image)
verification OK: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Image size: 941.2'x626.6' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 15:06:53.119 +13:58:55.76 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 15:06:31.559 +14:00:32.46
Second-epoch image center 15:06:53.119 +13:58:55.76
Angular distance between the image centers 0.0912 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 15:06:50.067 +13:59:36.69
Second-epoch second image center 15:06:53.119 +13:58:55.76
Angular distance between the image centers 0.01678 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits &> /tmp/tmp.WFsl92q7lP
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits &> /tmp/tmp.24vJCI3s32
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits &> /tmp/tmp.WH5GuaH9h7
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits &> /tmp/tmp.aDRro3kXgG
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Calibrating the magnitude scale
Found non-empty wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits and wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits and wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
Found non-empty wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits and wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
The reference image (wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits) and catalog (wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat) found
'wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat' -> 'wcsmag.cat'
Read 7234 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 218.3797 to 235.2508 deg, Dec +8.2135 to +19.5779 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 218.3797 to 235.2508 deg, Dec 8.2135 to 19.5779 deg
Loaded 4766 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3531 out of 3718 total matches.
Matched with Tycho-2 3718 out of 7234 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.834100
a=0.000000 b=1.000000 c=22.834100
From vast_summary.log: estimated ref. image limiting mag.: -7.49
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.34
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.34
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 7234 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 218.3797 to 235.2508 deg, Dec +8.2135 to +19.5779 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 218.3797 to 235.2508 deg, Dec 8.2135 to 19.5779 deg
Loaded 4766 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3531 out of 3718 total matches.
Matched with Tycho-2 3718 out of 7234 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits:
Forced-photometry filter: calibrated wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits -> calib.txt_param_ref_wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits (aperture=6.3)
Read 6628 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 218.4353 to 234.9169 deg, Dec +8.6792 to +19.2477 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 218.4353 to 234.9169 deg, Dec 8.6792 to 19.2477 deg
Loaded 4308 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3555 out of 3660 total matches.
Matched with Tycho-2 3660 out of 6628 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits:
Forced-photometry filter: calibrated wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits -> calib.txt_param_ref_wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits (aperture=6.3)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 3 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.2 pix Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
2.2 pix Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
2.7 pix fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
2.7 pix fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
2.2 pix wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
2.2 pix wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
Limiting magnitude estimates:
15.3 mag. Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
15.2 mag. Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
14.2 mag. fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
13.9 mag. fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
All-image limiting magnitude estimate: 13.9 (SNR ) 11.4 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.WFsl92q7lP (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits 574.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits' -> 'wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
WCS_IMAGE_NAME=wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
WCS-calibrated image found: wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
Checking if the catalog wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat corresponding to the image wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits alredy exist and is non-empty...
Catalog wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat corresponding to the image wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
WCS catalog name: wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=532, bad_region=0, passed=7234
Got 7234 stars (including 6692 good ones) from the SExtractor catalog wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
util/solve_plate_with_UCAC5 got 7234 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.4'
Seting catalog search parameters based on the expected field of view 941.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013075 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010460 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 491 to 549 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 961 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 961 matched stars entering correct_measured_positions(), 948 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 961 matched stars entering correct_measured_positions(), 7089 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 491 to 549 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 961 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 961 matched stars entering correct_measured_positions(), 7087 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Accuracy estimation diagnostic: 961 matched stars entering correct_measured_positions(), 7087 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Excluding outliers - 961 stars left (next iteration limit 1057)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits N_match=961 sigma_overall_arcsec=0.372 sigma_q1_arcsec=0.365 sigma_q2_arcsec=0.403 sigma_q3_arcsec=0.322 sigma_q4_arcsec=0.378 n_q1=243 n_q2=205 n_q3=263 n_q4=250 worst_quadrant_to_overall_ratio=1.084
The image catalog is written to wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits -region wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.24vJCI3s32 (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits' -> 'wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
WCS_IMAGE_NAME=wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
WCS-calibrated image found: wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
Checking if the catalog wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat corresponding to the image wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits alredy exist and is non-empty...
Catalog wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat corresponding to the image wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
WCS catalog name: wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=395, bad_region=0, passed=6628
Got 6628 stars (including 6229 good ones) from the SExtractor catalog wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat
util/solve_plate_with_UCAC5 got 6628 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.2'
Seting catalog search parameters based on the expected field of view 937.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013017 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010413 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 493 to 548 (Dec 8.7 to 19.2)
Done reading UCAC5 zone files...
Matched 963 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 963 matched stars entering correct_measured_positions(), 953 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.41"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 963 matched stars entering correct_measured_positions(), 6473 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 493 to 548 (Dec 8.7 to 19.2)
Done reading UCAC5 zone files...
Matched 963 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 963 matched stars entering correct_measured_positions(), 6473 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
Accuracy estimation diagnostic: 963 matched stars entering correct_measured_positions(), 6473 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.40"
Excluding outliers - 963 stars left (next iteration limit 1059)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits N_match=963 sigma_overall_arcsec=0.423 sigma_q1_arcsec=0.319 sigma_q2_arcsec=0.533 sigma_q3_arcsec=0.382 sigma_q4_arcsec=0.500 n_q1=234 n_q2=227 n_q3=235 n_q4=267 worst_quadrant_to_overall_ratio=1.260
The image catalog is written to wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits -region wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.WH5GuaH9h7 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
WCS_IMAGE_NAME=wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
WCS-calibrated image found: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
Checking if the catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat corresponding to the image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits alredy exist and is non-empty...
Catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat corresponding to the image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
WCS catalog name: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=167, bad_region=0, passed=3548
Got 3548 stars (including 3376 good ones) from the SExtractor catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat
util/solve_plate_with_UCAC5 got 3548 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.2'
Seting catalog search parameters based on the expected field of view 941.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013072 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010458 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 491 to 549 (Dec 8.3 to 19.5)
Done reading UCAC5 zone files...
Matched 955 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 954 matched stars entering correct_measured_positions(), 940 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 954 matched stars entering correct_measured_positions(), 3467 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 491 to 549 (Dec 8.3 to 19.5)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 3467 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 3467 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Excluding outliers - 955 stars left (next iteration limit 1049)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits N_match=955 sigma_overall_arcsec=0.285 sigma_q1_arcsec=0.275 sigma_q2_arcsec=0.290 sigma_q3_arcsec=0.269 sigma_q4_arcsec=0.267 n_q1=275 n_q2=185 n_q3=235 n_q4=260 worst_quadrant_to_overall_ratio=1.018
The image catalog is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits -region wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.aDRro3kXgG (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
WCS_IMAGE_NAME=wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
WCS-calibrated image found: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Checking if the catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat corresponding to the image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits alredy exist and is non-empty...
Catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat corresponding to the image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
WCS catalog name: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=166, bad_region=0, passed=3399
Got 3399 stars (including 3228 good ones) from the SExtractor catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat
util/solve_plate_with_UCAC5 got 3399 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.2'
Seting catalog search parameters based on the expected field of view 941.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013072 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010458 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.2 to 19.5)
Done reading UCAC5 zone files...
Matched 957 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 945 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 3339 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.2 to 19.5)
Done reading UCAC5 zone files...
Matched 958 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 3336 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 3336 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Excluding outliers - 957 stars left (next iteration limit 1051)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits N_match=957 sigma_overall_arcsec=0.307 sigma_q1_arcsec=0.296 sigma_q2_arcsec=0.364 sigma_q3_arcsec=0.278 sigma_q4_arcsec=0.327 n_q1=285 n_q2=173 n_q3=268 n_q4=231 worst_quadrant_to_overall_ratio=1.185
The image catalog is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits -region wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits sigma_overall=0.372 worst_q_ratio=1.084
ref2=Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits sigma_overall=0.423 worst_q_ratio=1.260
new1=fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits sigma_overall=0.285 worst_q_ratio=1.018
new2=fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits sigma_overall=0.307 worst_q_ratio=1.185
reference average sigma_overall=0.3975 worst_q_ratio=1.172
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268_astrometric_residuals.png (961 matched stars from wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.33 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618_astrometric_residuals.png (963 matched stars from wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.36 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172_astrometric_residuals.png (955 matched stars from wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.26 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173_astrometric_residuals.png (957 matched stars from wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.27 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits'
Saving fully-calibrated image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits'
Preparing the HTML report for the field Boo-10-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
make_report_in_HTML.sh Phase 1 (network queries): 0s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 1s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 01157_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 01157_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
**** FOUND 14:54:19.97 +17:41:43.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 03054_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 03054_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
**** FOUND 15:21:39.49 +14:18:52.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 01775_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 01775_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
**** FOUND 15:16:28.47 +16:26:39.7 in the exclusion list exclusion_list.txt ****
make_report_in_HTML.sh Phase 2 (HTML assembly): 0s
make_report_in_HTML.sh TOTAL: 1s
Prepared the HTML report for the field Boo-10-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --norotation --noflagimage --starmatchraius 5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
SExtractor catalog cache: saved Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.cat to cache
SExtractor catalog cache: saved Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
Creating symlink local_wcs_cache/wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
Creating symlink local_wcs_cache/wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
Creating symlink local_wcs_cache/wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Creating symlink local_wcs_cache/exclusion_list.txt
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits exists and is non-empty
wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits exists and is non-empty
wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits exists and is non-empty
wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits (1st reference image)
verification OK: wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
Image size: 941.4'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 15:06:31.559 +14:00:32.46 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits (1st new image)
verification OK: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
Image size: 941.2'x626.6' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 15:06:50.067 +13:59:36.69 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 15:06:31.559 +14:00:32.46
Second-epoch image center 15:06:50.067 +13:59:36.69
Angular distance between the image centers 0.0764 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits (2nd new image)
verification OK: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Image size: 941.2'x626.6' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 15:06:53.119 +13:58:55.76 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 15:06:31.559 +14:00:32.46
Second-epoch image center 15:06:53.119 +13:58:55.76
Angular distance between the image centers 0.0912 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 15:06:50.067 +13:59:36.69
Second-epoch second image center 15:06:53.119 +13:58:55.76
Angular distance between the image centers 0.01678 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits &> /tmp/tmp.4ZraVoRvvn
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits &> /tmp/tmp.vDNltvqL7x
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits &> /tmp/tmp.lBP1Ckuia0
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits &> /tmp/tmp.w0yCTsJqFM
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Calibrating the magnitude scale
Found non-empty wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits and wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits and wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
Found non-empty wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits and wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
The reference image (wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits) and catalog (wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat) found
'wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat' -> 'wcsmag.cat'
Read 44426 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 218.3704 to 235.2508 deg, Dec +8.1862 to +19.5920 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 218.3704 to 235.2508 deg, Dec 8.1862 to 19.5920 deg
Loaded 4783 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3318 out of 3737 total matches.
Matched with Tycho-2 3737 out of 44426 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.706700
a=0.000000 b=1.000000 c=22.706700
From vast_summary.log: estimated ref. image limiting mag.: -7.18
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.53
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.53
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 44426 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 218.3704 to 235.2508 deg, Dec +8.1862 to +19.5920 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 218.3704 to 235.2508 deg, Dec 8.1862 to 19.5920 deg
Loaded 4783 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3318 out of 3737 total matches.
Matched with Tycho-2 3737 out of 44426 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits:
Forced-photometry filter: calibrated wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits -> calib.txt_param_ref_wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits (aperture=4.7)
Read 37570 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 218.4353 to 234.9169 deg, Dec +8.6742 to +19.2568 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 218.4353 to 234.9169 deg, Dec 8.6742 to 19.2568 deg
Loaded 4313 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 3416 out of 3706 total matches.
Matched with Tycho-2 3706 out of 37570 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits:
Forced-photometry filter: calibrated wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits -> calib.txt_param_ref_wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits (aperture=4.9)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 18 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.0 pix Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
2.1 pix Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
2.5 pix fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
2.5 pix fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
2.0 pix wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
2.1 pix wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
Limiting magnitude estimates:
15.5 mag. Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
15.3 mag. Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
14.2 mag. fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
13.9 mag. fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
All-image limiting magnitude estimate: 13.9 (SNR ) 13.7 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.4ZraVoRvvn (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits 574.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits' -> 'wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
WCS_IMAGE_NAME=wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
WCS-calibrated image found: wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
Checking if the catalog wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat corresponding to the image wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits alredy exist and is non-empty...
Catalog wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat corresponding to the image wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits
WCS catalog name: wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=30, blended=1964, bad_region=21, passed=44396
Got 44396 stars (including 42330 good ones) from the SExtractor catalog wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat
util/solve_plate_with_UCAC5 got 44396 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.4'
Seting catalog search parameters based on the expected field of view 941.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013075 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010460 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 962 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 962 matched stars entering correct_measured_positions(), 950 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 962 matched stars entering correct_measured_positions(), 43354 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 962 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 962 matched stars entering correct_measured_positions(), 43353 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Accuracy estimation diagnostic: 962 matched stars entering correct_measured_positions(), 43352 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.35"
Excluding outliers - 962 stars left (next iteration limit 1058)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits N_match=962 sigma_overall_arcsec=0.370 sigma_q1_arcsec=0.360 sigma_q2_arcsec=0.389 sigma_q3_arcsec=0.327 sigma_q4_arcsec=0.373 n_q1=245 n_q2=205 n_q3=260 n_q4=252 worst_quadrant_to_overall_ratio=1.051
The image catalog is written to wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits -region wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.vDNltvqL7x (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits' -> 'wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
WCS_IMAGE_NAME=wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
WCS-calibrated image found: wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
Checking if the catalog wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat corresponding to the image wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits alredy exist and is non-empty...
Catalog wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat corresponding to the image wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits
WCS catalog name: wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=19, blended=1496, bad_region=0, passed=37551
Got 37551 stars (including 36005 good ones) from the SExtractor catalog wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat
util/solve_plate_with_UCAC5 got 37551 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.2'
Seting catalog search parameters based on the expected field of view 937.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013017 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010413 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 493 to 548 (Dec 8.7 to 19.3)
Done reading UCAC5 zone files...
Matched 962 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 962 matched stars entering correct_measured_positions(), 953 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.41"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 962 matched stars entering correct_measured_positions(), 36879 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 493 to 548 (Dec 8.7 to 19.3)
Done reading UCAC5 zone files...
Matched 962 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 962 matched stars entering correct_measured_positions(), 36880 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Accuracy estimation diagnostic: 962 matched stars entering correct_measured_positions(), 36881 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Excluding outliers - 962 stars left (next iteration limit 1058)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits N_match=962 sigma_overall_arcsec=0.424 sigma_q1_arcsec=0.300 sigma_q2_arcsec=0.519 sigma_q3_arcsec=0.393 sigma_q4_arcsec=0.466 n_q1=233 n_q2=226 n_q3=236 n_q4=267 worst_quadrant_to_overall_ratio=1.225
The image catalog is written to wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits -region wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.lBP1Ckuia0 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
WCS_IMAGE_NAME=wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
WCS-calibrated image found: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
Checking if the catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat corresponding to the image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits alredy exist and is non-empty...
Catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat corresponding to the image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
WCS catalog name: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=4, blended=599, bad_region=30, passed=21301
Got 21301 stars (including 20636 good ones) from the SExtractor catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat
util/solve_plate_with_UCAC5 got 21301 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.2'
Seting catalog search parameters based on the expected field of view 941.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013072 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010458 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 941 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 20896 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 20896 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 20896 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Excluding outliers - 956 stars left (next iteration limit 1051)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits N_match=956 sigma_overall_arcsec=0.277 sigma_q1_arcsec=0.271 sigma_q2_arcsec=0.316 sigma_q3_arcsec=0.264 sigma_q4_arcsec=0.267 n_q1=281 n_q2=180 n_q3=236 n_q4=259 worst_quadrant_to_overall_ratio=1.139
The image catalog is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits -region wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.w0yCTsJqFM (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
WCS_IMAGE_NAME=wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
WCS-calibrated image found: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Checking if the catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat corresponding to the image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits alredy exist and is non-empty...
Catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat corresponding to the image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
WCS catalog name: wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat
Excluding image region: 190.0 1039.0 192.0 1041.0 (defined in bad_region.lst)
Excluding image region: 226.0 1548.0 228.0 1550.0 (defined in bad_region.lst)
Excluding image region: 351.0 1875.0 353.0 1877.0 (defined in bad_region.lst)
Excluding image region: 501.0 5912.0 503.0 5914.0 (defined in bad_region.lst)
Excluding image region: 638.0 5545.0 640.0 5547.0 (defined in bad_region.lst)
Excluding image region: 724.0 2731.0 726.0 2733.0 (defined in bad_region.lst)
Excluding image region: 883.0 1376.0 885.0 1378.0 (defined in bad_region.lst)
Excluding image region: 901.0 3972.0 903.0 3974.0 (defined in bad_region.lst)
Excluding image region: 1151.0 918.0 1153.0 920.0 (defined in bad_region.lst)
Excluding image region: 1157.0 135.0 1159.0 137.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 50 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=7, blended=495, bad_region=35, passed=20438
Got 20438 stars (including 19871 good ones) from the SExtractor catalog wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat
util/solve_plate_with_UCAC5 got 20438 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.2'
Seting catalog search parameters based on the expected field of view 941.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013072 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010458 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.2 to 19.5)
Done reading UCAC5 zone files...
Matched 957 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 943 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 20055 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 549 (Dec 8.2 to 19.5)
Done reading UCAC5 zone files...
Matched 957 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 20056 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 20056 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Excluding outliers - 957 stars left (next iteration limit 1052)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits N_match=957 sigma_overall_arcsec=0.298 sigma_q1_arcsec=0.285 sigma_q2_arcsec=0.371 sigma_q3_arcsec=0.271 sigma_q4_arcsec=0.312 n_q1=287 n_q2=170 n_q3=269 n_q4=231 worst_quadrant_to_overall_ratio=1.246
The image catalog is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits -region wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-48-23_20.00sec_-0.00C_LIGHTs_0172.fits
Saving fully-calibrated image wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-07-16_CI_Boo-10-Q1b1x1_005102_TTUQ1b1x1_2344803_TV40vvkl/wcs_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173.fits
Preparing the HTML report for the field Boo-10-Q1b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 14:37:49.97 +14:48:25.4: 13.14 +/- 0.02 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:36:58.98 +11:37:12.1: 13.11 +/- 0.03 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 14:38:47.19 +15:02:45.8: 11.52 +/- 0.01 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:16:27.82 +16:46:28.4: 13.15 +/- 0.03 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 14:40:11.61 +14:12:25.6: 12.85 +/- 0.02 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 14:58:36.28 +13:16:49.3: 16.25 +/- 99.00 upperlimit
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:16:03.60 +15:32:21.9: 14.40 +/- 0.09 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:19:32.73 +15:56:20.9: 13.82 +/- 0.05 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:16:00.46 +15:43:51.5: 14.31 +/- 0.08 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:15:48.45 +15:45:59.0: 14.19 +/- 0.06 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 14:37:49.97 +14:48:25.4: 13.10 +/- 0.03 detection
Forced photometry reference-image weighted average: 13.12 +/- 0.02
Forced photometry filter REJECTED candidate at 14:37:49.97 +14:48:25.4: ref_mag=13.12 +/- 0.02 new_mean_mag=12.8902 delta=0.23 (need > 0.90)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:19:32.73 +15:56:20.9: 13.64 +/- 0.05 detection
Forced photometry reference-image weighted average: 13.72 +/- 0.04
Forced photometry filter REJECTED candidate at 15:19:32.73 +15:56:20.9: ref_mag=13.72 +/- 0.04 new_mean_mag=13.0589 delta=0.66 (need > 0.90)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 14:38:47.19 +15:02:45.8: 11.50 +/- 0.01 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 14:40:11.61 +14:12:25.6: 12.89 +/- 0.02 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:16:03.60 +15:32:21.9: 14.27 +/- 0.08 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:16:00.46 +15:43:51.5: 14.20 +/- 0.08 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 14:58:36.28 +13:16:49.3: 16.03 +/- 99.00 upperlimit
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:16:27.82 +16:46:28.4: 13.14 +/- 0.03 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:36:58.98 +11:37:12.1: 13.04 +/- 0.03 detection
Forced photometry reference-image weighted average: 11.51 +/- 0.00
Forced photometry reference-image weighted average: 12.87 +/- 0.01
Forced photometry filter REJECTED candidate at 14:38:47.19 +15:02:45.8: ref_mag=11.51 +/- 0.00 new_mean_mag=11.7713 delta=-0.26 (need > 0.90)
Forced photometry reference-image weighted average: 14.33 +/- 0.06
Forced photometry reference-image weighted average: 14.26 +/- 0.06
Forced photometry filter REJECTED candidate at 14:40:11.61 +14:12:25.6: ref_mag=12.87 +/- 0.01 new_mean_mag=12.9601 delta=-0.09 (need > 0.90)
Forced photometry reference-image weighted average: 13.15 +/- 0.02
Forced photometry filter REJECTED candidate at 15:16:03.60 +15:32:21.9: ref_mag=14.33 +/- 0.06 new_mean_mag=13.7086 delta=0.62 (need > 0.90)
Forced photometry reference-image weighted average: 13.07 +/- 0.02
Forced photometry filter REJECTED candidate at 15:16:00.46 +15:43:51.5: ref_mag=14.26 +/- 0.06 new_mean_mag=13.4700 delta=0.79 (need > 0.90)
Forced photometry filter REJECTED candidate at 15:16:27.82 +16:46:28.4: ref_mag=13.15 +/- 0.02 new_mean_mag=12.6962 delta=0.45 (need > 0.90)
Forced photometry filter REJECTED candidate at 15:36:58.98 +11:37:12.1: ref_mag=13.07 +/- 0.02 new_mean_mag=13.0185 delta=0.06 (need > 0.90)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:15:48.45 +15:45:59.0: 14.13 +/- 0.07 detection
Forced photometry reference-image weighted average: 14.16 +/- 0.05
Forced photometry filter KEPT candidate at 15:15:48.45 +15:45:59.0: ref_mag=14.16 +/- 0.05 new_mean_mag=13.2210 delta=0.94 (need > 0.90)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:06:30.43 +17:07:08.0: 14.52 +/- 0.07 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:08:33.35 +09:08:30.4: 14.51 +/- 0.09 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:11:50.22 +16:14:24.1: 14.37 +/- 0.07 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-12_02-40-39_20.00sec_-5.00C_LIGHTs_0268.fits at 15:16:01.12 +16:23:39.9: 14.03 +/- 0.05 detection
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:06:30.43 +17:07:08.0: 14.49 +/- 0.09 detection
Forced photometry reference-image weighted average: 14.51 +/- 0.06
Forced photometry filter KEPT candidate at 15:06:30.43 +17:07:08.0: ref_mag=14.51 +/- 0.06 new_mean_mag=13.5347 delta=0.97 (need > 0.90)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:08:33.35 +09:08:30.4: 14.49 +/- 0.10 detection
Forced photometry reference-image weighted average: 14.50 +/- 0.07
Forced photometry filter KEPT candidate at 15:08:33.35 +09:08:30.4: ref_mag=14.50 +/- 0.07 new_mean_mag=13.3058 delta=1.20 (need > 0.90)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:11:50.22 +16:14:24.1: 14.28 +/- 0.07 detection
Forced photometry reference-image weighted average: 14.33 +/- 0.05
Forced photometry filter KEPT candidate at 15:11:50.22 +16:14:24.1: ref_mag=14.33 +/- 0.05 new_mean_mag=13.3741 delta=0.95 (need > 0.90)
Forced photometry on wcs_Boo-10-Q1b1x1_2026-05-18_01-36-54_20.00sec_4.90C_LIGHT_1618.fits at 15:16:01.12 +16:23:39.9: 14.02 +/- 0.06 detection
Forced photometry reference-image weighted average: 14.03 +/- 0.04
Forced photometry filter KEPT candidate at 15:16:01.12 +16:23:39.9: ref_mag=14.03 +/- 0.04 new_mean_mag=13.0798 delta=0.95 (need > 0.90)
Adding exclusion_list_local.txt__out09156.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out11627.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out12567.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out14337.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out29062.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out52176.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 82s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 4s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52001_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 52001_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52002_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 52002_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52004_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 52004_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52051_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 52051_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52073_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 52073_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52094_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 52094_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52176_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
Preparing report for the candidate 52176_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52215_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 52215_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 52248_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 52248_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 14337_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
Preparing report for the candidate 14337_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 09156_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
Preparing report for the candidate 09156_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 29062_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
Preparing report for the candidate 29062_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 12567_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
Preparing report for the candidate 12567_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 19595_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 19595_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
**** FOUND 15:21:39.51 +14:18:51.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 41883_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 41883_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
**** FOUND 15:33:06.64 +11:24:55.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 11627_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
Preparing report for the candidate 11627_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 11286_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 11286_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
**** FOUND 15:16:28.48 +16:26:39.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 07169_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173
The candidate 07169_fd_Boo-10-Q1b1x1_2026-07-16_00-49-16_20.00sec_-0.00C_LIGHTs_0173 did not pass the final checks
