This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 07 05.2099 2461226.7099 10.85 17:47:17.96 -06:32:00.7
19.59314 11.09000 galactic Oph Second-epoch detections are separated by 0.4" and 10.5 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.51 Nemausa 1 0 1 11.0 -0 -0
Forced photometry on wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits at 17:47:17.96 -06:32:00.7: 15.57 +/- 99.00 upperlimit
Forced photometry on wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits at 17:47:17.96 -06:32:00.7: 15.59 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461226.7099,10.85,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260705.2099 10.85CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 07 05.2099 2461226.7099 11.34 17:51:30.11 -06:55:16.4
19.76810 9.99028 galactic Oph Second-epoch detections are separated by 1.3" and 10.3 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.216 Kleopatra -1 0 1 11.5 -0 -0
Forced photometry on wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits at 17:51:30.11 -06:55:16.4: 15.63 +/- 99.00 upperlimit
Forced photometry on wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits at 17:51:30.11 -06:55:16.4: 15.61 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461226.7099,11.34,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-2 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260705.2099 11.34CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461176.83459459 16.05.2026 08:01:38.973 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
First image: 2461176.83459459 16.05.2026 08:01:38.973 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
Last image: 2461226.71016822 05.07.2026 05:02:28.534 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
JD time system (TT/UTC/UNKNOWN): UTC
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.93
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 3 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
Total objects detected (at least 2 times): 6118
Objects passed selection criteria: 6079
Measurements per detected object (mean, median, min, max): 2.1 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.1 2.0 2 4
Average stars detected per image: 3490
Average stars matched: 3372.5 (96.6332 %)
Memory usage VmPeak: 113420 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Fri Jul 3 15:05:03 CDT 2026
VaST build number 1.0rc89-123-g57107621
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-07-03)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Sun Jul 5 00:06:23 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461176.83459459 16.05.2026 08:01:38.973 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
First image: 2461176.83459459 16.05.2026 08:01:38.973 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
Last image: 2461226.71016822 05.07.2026 05:02:28.534 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 10
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.58
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 15 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
Total objects detected (at least 2 times): 62969
Objects passed selection criteria: 62810
Measurements per detected object (mean, median, min, max): 2.2 2.0 2 4
Measurements per selected object (mean, median, min, max): 2.2 2.0 2 4
Average stars detected per image: 38199.5
Average stars matched: 36179.5 (94.712 %)
Memory usage VmPeak: 173048 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Fri Jul 3 15:05:03 CDT 2026
VaST build number 1.0rc89-123-g57107621
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-07-03)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Sun Jul 5 00:09:04 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ2b1x1/TTUQ2_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --norotation --noflagimage --starmatchraius 4 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
SExtractor catalog cache: saved Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.cat to cache
SExtractor catalog cache: saved Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461226.70956885
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits exists and is non-empty
Saving wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits to local_wcs_cache/
'wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits' -> 'local_wcs_cache/wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits'
wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits exists and is non-empty
Saving wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits to local_wcs_cache/
'wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits' -> 'local_wcs_cache/wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits'
wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits exists and is non-empty
Saving wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits to local_wcs_cache/
'wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits' -> 'local_wcs_cache/wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits'
wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits exists and is non-empty
Saving wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits to local_wcs_cache/
'wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits' -> 'local_wcs_cache/wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits'
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits (1st reference image)
verification OK: wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
Image size: 937.4'x624.3' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 17:59:59.128 -09:59:33.92 J2000 4789.000 3195.000
###################################
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits (1st new image)
verification OK: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
Image size: 936.9'x624.1' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 18:00:00.835 -09:59:54.07 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 17:59:59.128 -09:59:33.92
Second-epoch image center 18:00:00.835 -09:59:54.07
Angular distance between the image centers 0.0090 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits (2nd new image)
verification OK: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Image size: 937.0'x624.1' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 17:59:58.088 -09:59:07.29 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 17:59:59.128 -09:59:33.92
Second-epoch image center 17:59:58.088 -09:59:07.29
Angular distance between the image centers 0.0085 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 18:00:00.835 -09:59:54.07
Second-epoch second image center 17:59:58.088 -09:59:07.29
Angular distance between the image centers 0.01720 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits &> /tmp/tmp.73mK5oW0ij
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits &> /tmp/tmp.4tzBwOwdNR
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits &> /tmp/tmp.nH7GE748l3
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits &> /tmp/tmp.vChg6utM5L
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Calibrating the magnitude scale
Found non-empty wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits and wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits and wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
Found non-empty wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits and wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
The reference image (wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits) and catalog (wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat) found
'wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat' -> 'wcsmag.cat'
Read 10482 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 261.9712 to 278.0974 deg, Dec -15.2568 to -4.6948 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 261.9712 to 278.0974 deg, Dec -15.2568 to -4.6948 deg
Loaded 6275 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4878 out of 5154 total matches.
Matched with Tycho-2 5154 out of 10482 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.707650
a=0.000000 b=1.000000 c=22.707650
From vast_summary.log: estimated ref. image limiting mag.: -7.93
Updating vast_summary.log: Estimated ref. image limiting mag.: 14.78
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 14.78
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 10482 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 261.9712 to 278.0974 deg, Dec -15.2568 to -4.6948 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 261.9712 to 278.0974 deg, Dec -15.2568 to -4.6948 deg
Loaded 6275 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4878 out of 5154 total matches.
Matched with Tycho-2 5154 out of 10482 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits:
Forced-photometry filter: calibrated wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits -> calib.txt_param_ref_wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits (aperture=6.3)
Read 10473 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 261.9847 to 278.0962 deg, Dec -15.2534 to -4.6915 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 261.9847 to 278.0962 deg, Dec -15.2534 to -4.6915 deg
Loaded 6271 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4878 out of 5146 total matches.
Matched with Tycho-2 5146 out of 10473 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits:
Forced-photometry filter: calibrated wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits -> calib.txt_param_ref_wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits (aperture=6.3)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 0 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.5 pix Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
2.5 pix Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
2.4 pix fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
2.4 pix fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
2.5 pix wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
2.5 pix wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
Limiting magnitude estimates:
14.8 mag. Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
14.8 mag. Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
11.2 mag. fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
11.4 mag. fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
All-image limiting magnitude estimate: 11.2 (SNR ) 9.3 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.73mK5oW0ij (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits' -> 'wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
WCS_IMAGE_NAME=wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
WCS-calibrated image found: wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
Checking if the catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat corresponding to the image wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits alredy exist and is non-empty...
Catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat corresponding to the image wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
WCS catalog name: wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=794, bad_region=3862, passed=10482
Got 10482 stars (including 6139 good ones) from the SExtractor catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
util/solve_plate_with_UCAC5 got 10482 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.4'
Seting catalog search parameters based on the expected field of view 937.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013019 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010416 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 932 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 931 matched stars entering correct_measured_positions(), 920 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.49"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 931 matched stars entering correct_measured_positions(), 7085 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 932 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 931 matched stars entering correct_measured_positions(), 7086 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.49"
Accuracy estimation diagnostic: 931 matched stars entering correct_measured_positions(), 7086 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.51"
Excluding outliers - 931 stars left (next iteration limit 1024)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits N_match=931 sigma_overall_arcsec=0.530 sigma_q1_arcsec=0.493 sigma_q2_arcsec=0.558 sigma_q3_arcsec=0.593 sigma_q4_arcsec=0.473 n_q1=357 n_q2=271 n_q3=193 n_q4=110 worst_quadrant_to_overall_ratio=1.120
The image catalog is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits -region wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.4tzBwOwdNR (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits' -> 'wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
WCS_IMAGE_NAME=wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
WCS-calibrated image found: wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
Checking if the catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat corresponding to the image wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits alredy exist and is non-empty...
Catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat corresponding to the image wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
WCS catalog name: wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=789, bad_region=3843, passed=10473
Got 10473 stars (including 6155 good ones) from the SExtractor catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat
util/solve_plate_with_UCAC5 got 10473 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.4'
Seting catalog search parameters based on the expected field of view 937.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013019 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010416 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 934 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 921 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.50"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 7128 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.49"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 934 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 7129 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.50"
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 7129 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.52"
Excluding outliers - 933 stars left (next iteration limit 1026)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits N_match=933 sigma_overall_arcsec=0.531 sigma_q1_arcsec=0.511 sigma_q2_arcsec=0.578 sigma_q3_arcsec=0.609 sigma_q4_arcsec=0.441 n_q1=357 n_q2=280 n_q3=186 n_q4=110 worst_quadrant_to_overall_ratio=1.146
The image catalog is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits -region wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.nH7GE748l3 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
WCS_IMAGE_NAME=wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
WCS-calibrated image found: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
Checking if the catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat corresponding to the image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits alredy exist and is non-empty...
Catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat corresponding to the image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
WCS catalog name: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=38, bad_region=182, passed=576
Got 576 stars (including 369 good ones) from the SExtractor catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat
util/solve_plate_with_UCAC5 got 576 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 936.9'
Seting catalog search parameters based on the expected field of view 936.9 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013013 (46.8 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010410 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.8)
Done reading UCAC5 zone files...
Matched 343 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 342 matched stars entering correct_measured_positions(), 258 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.53"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 342 matched stars entering correct_measured_positions(), 321 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.54"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.8)
Done reading UCAC5 zone files...
Matched 343 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 342 matched stars entering correct_measured_positions(), 324 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.62"
Accuracy estimation diagnostic: 342 matched stars entering correct_measured_positions(), 324 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.63"
Excluding outliers - 342 stars left (next iteration limit 376)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits N_match=342 sigma_overall_arcsec=0.596 sigma_q1_arcsec=0.597 sigma_q2_arcsec=0.682 sigma_q3_arcsec=0.679 sigma_q4_arcsec=0.442 n_q1=106 n_q2=80 n_q3=104 n_q4=52 worst_quadrant_to_overall_ratio=1.145
The image catalog is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits -region wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.vChg6utM5L (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
WCS_IMAGE_NAME=wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
WCS-calibrated image found: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Checking if the catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat corresponding to the image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits alredy exist and is non-empty...
Catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat corresponding to the image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
WCS catalog name: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=45, bad_region=180, passed=596
Got 596 stars (including 385 good ones) from the SExtractor catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat
util/solve_plate_with_UCAC5 got 596 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.0'
Seting catalog search parameters based on the expected field of view 937.0 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013014 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010411 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.7)
Done reading UCAC5 zone files...
Matched 354 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 353 matched stars entering correct_measured_positions(), 278 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.53"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 353 matched stars entering correct_measured_positions(), 340 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.53"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.7)
Done reading UCAC5 zone files...
Matched 354 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 353 matched stars entering correct_measured_positions(), 337 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.57"
Accuracy estimation diagnostic: 353 matched stars entering correct_measured_positions(), 337 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.58"
Excluding outliers - 353 stars left (next iteration limit 388)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits N_match=353 sigma_overall_arcsec=0.646 sigma_q1_arcsec=0.670 sigma_q2_arcsec=0.709 sigma_q3_arcsec=0.636 sigma_q4_arcsec=0.565 n_q1=111 n_q2=76 n_q3=107 n_q4=59 worst_quadrant_to_overall_ratio=1.096
The image catalog is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits -region wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
###################################
# Pre-local-correction WCS quality summary (see WCS_QUALITY_DIAG lines above)
ref1=Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits sigma_overall=0.530 worst_q_ratio=1.120
ref2=Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits sigma_overall=0.531 worst_q_ratio=1.146
new1=fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits sigma_overall=0.596 worst_q_ratio=1.145
new2=fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits sigma_overall=0.646 worst_q_ratio=1.096
reference average sigma_overall=0.5305 worst_q_ratio=1.133
warn-on-ratio threshold: 2.0x reference
###################################
Astrometric residual vector field (catalog-matched stars):
plot_astrometric_residuals_xy.py: wrote wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209_astrometric_residuals.png (931 matched stars from wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.47 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210_astrometric_residuals.png (933 matched stars from wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.49 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006_astrometric_residuals.png (342 matched stars from wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.59 arcsec)
plot_astrometric_residuals_xy.py: wrote wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007_astrometric_residuals.png (353 matched stars from wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat.astrometric_residuals, image 9576x6388, median residual 0.61 arcsec)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits'
Saving fully-calibrated image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits'
Preparing the HTML report for the field Oph-06-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
No candidates found here
Prepared the HTML report for the field Oph-06-Q2b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --norotation --noflagimage --starmatchraius 4 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
SExtractor catalog cache: saved Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.cat to cache
SExtractor catalog cache: saved Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
Creating symlink local_wcs_cache/wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
Creating symlink local_wcs_cache/wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
Creating symlink local_wcs_cache/wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Creating symlink local_wcs_cache/exclusion_list.txt
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits exists and is non-empty
wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits exists and is non-empty
wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits exists and is non-empty
wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits (1st reference image)
verification OK: wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
Image size: 937.4'x624.3' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 17:59:59.128 -09:59:33.92 J2000 4789.000 3195.000
###################################
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits (1st new image)
verification OK: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
Image size: 936.9'x624.1' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 18:00:00.835 -09:59:54.07 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 17:59:59.128 -09:59:33.92
Second-epoch image center 18:00:00.835 -09:59:54.07
Angular distance between the image centers 0.0090 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits (2nd new image)
verification OK: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Image size: 937.0'x624.1' 15.6(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.87"/pix along the X axis and 5.86"/pix along the Y axis
Image center: 17:59:58.088 -09:59:07.29 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 17:59:59.128 -09:59:33.92
Second-epoch image center 17:59:58.088 -09:59:07.29
Angular distance between the image centers 0.0085 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 18:00:00.835 -09:59:54.07
Second-epoch second image center 17:59:58.088 -09:59:07.29
Angular distance between the image centers 0.01720 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for a parallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits &> /tmp/tmp.t87O8xY7dc
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits &> /tmp/tmp.hczPomNGPo
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits &> /tmp/tmp.g2QgvfR098
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits &> /tmp/tmp.a7B9cvsodX
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Calibrating the magnitude scale
Found non-empty wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits and wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
wait (drain background util/solve_plate_with_UCAC5 jobs before Tycho-2 calibration -- avoids wcs_.fits write race)
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits and wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
Found non-empty wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits and wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
The reference image (wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits) and catalog (wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat) found
'wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat' -> 'wcsmag.cat'
Read 98551 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 261.9293 to 278.0974 deg, Dec -15.2608 to -4.6871 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 261.9293 to 278.0974 deg, Dec -15.2608 to -4.6871 deg
Loaded 6295 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4581 out of 5549 total matches.
Matched with Tycho-2 5549 out of 98551 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.509900
a=0.000000 b=1.000000 c=22.509900
From vast_summary.log: estimated ref. image limiting mag.: -7.58
Updating vast_summary.log: Estimated ref. image limiting mag.: 14.93
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 14.93
Lightcurve magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 98551 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 261.9293 to 278.0974 deg, Dec -15.2608 to -4.6871 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 261.9293 to 278.0974 deg, Dec -15.2608 to -4.6871 deg
Loaded 6295 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4581 out of 5549 total matches.
Matched with Tycho-2 5549 out of 98551 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits:
Forced-photometry filter: calibrated wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits -> calib.txt_param_ref_wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits (aperture=4.5)
Read 98094 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 261.9349 to 278.1088 deg, Dec -15.2533 to -4.6750 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 261.9349 to 278.1088 deg, Dec -15.2533 to -4.6750 deg
Loaded 6299 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4565 out of 5541 total matches.
Matched with Tycho-2 5541 out of 98094 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits via Tycho-2
Single-image forced-photometry magnitude calibration plot for wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits:
Forced-photometry filter: calibrated wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits -> calib.txt_param_ref_wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits (aperture=4.5)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 10 candidate transients before the final filtering. (Hard limit: 10000)
Median FWHM seeing for isolated stars:
2.2 pix Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
2.2 pix Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
2.1 pix fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
2.2 pix fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
2.2 pix wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
2.2 pix wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
Limiting magnitude estimates:
14.9 mag. Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
14.9 mag. Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
12.2 mag. fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
12.3 mag. fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
All-image limiting magnitude estimate: 12.2 (SNR ) 12.0 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.5 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.t87O8xY7dc (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits' -> 'wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
WCS_IMAGE_NAME=wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
WCS-calibrated image found: wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
Checking if the catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat corresponding to the image wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits alredy exist and is non-empty...
Catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat corresponding to the image wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits
WCS catalog name: wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=11, blended=8119, bad_region=26419, passed=98540
Got 98540 stars (including 66756 good ones) from the SExtractor catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat
util/solve_plate_with_UCAC5 got 98540 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.4'
Seting catalog search parameters based on the expected field of view 937.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013019 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010416 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 933 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 922 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.49"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 75140 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 933 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 75139 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 75140 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.50"
Excluding outliers - 933 stars left (next iteration limit 1026)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits N_match=933 sigma_overall_arcsec=0.522 sigma_q1_arcsec=0.472 sigma_q2_arcsec=0.531 sigma_q3_arcsec=0.574 sigma_q4_arcsec=0.516 n_q1=348 n_q2=272 n_q3=199 n_q4=114 worst_quadrant_to_overall_ratio=1.100
The image catalog is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits -region wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.hczPomNGPo (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits 571.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits' -> 'wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
WCS_IMAGE_NAME=wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
WCS-calibrated image found: wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
Checking if the catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat corresponding to the image wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits alredy exist and is non-empty...
Catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat corresponding to the image wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits
WCS catalog name: wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=15, blended=8187, bad_region=26418, passed=98079
Got 98079 stars (including 66276 good ones) from the SExtractor catalog wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat
util/solve_plate_with_UCAC5 got 98079 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.4'
Seting catalog search parameters based on the expected field of view 937.4 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013019 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010416 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 933 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 926 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.50"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 75389 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 933 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 75389 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
Accuracy estimation diagnostic: 933 matched stars entering correct_measured_positions(), 75391 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.49"
Excluding outliers - 933 stars left (next iteration limit 1026)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits N_match=933 sigma_overall_arcsec=0.534 sigma_q1_arcsec=0.493 sigma_q2_arcsec=0.562 sigma_q3_arcsec=0.590 sigma_q4_arcsec=0.478 n_q1=343 n_q2=273 n_q3=200 n_q4=117 worst_quadrant_to_overall_ratio=1.106
The image catalog is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits -region wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.g2QgvfR098 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
WCS_IMAGE_NAME=wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
WCS-calibrated image found: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
Checking if the catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat corresponding to the image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits alredy exist and is non-empty...
Catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat corresponding to the image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
WCS catalog name: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=159, bad_region=1518, passed=6632
Got 6632 stars (including 5026 good ones) from the SExtractor catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat
util/solve_plate_with_UCAC5 got 6632 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 936.9'
Seting catalog search parameters based on the expected field of view 936.9 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013013 (46.8 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010410 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 919 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 916 matched stars entering correct_measured_positions(), 911 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.49"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 916 matched stars entering correct_measured_positions(), 5386 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.3 to -4.7)
Done reading UCAC5 zone files...
Matched 919 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 916 matched stars entering correct_measured_positions(), 5386 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
Accuracy estimation diagnostic: 916 matched stars entering correct_measured_positions(), 5386 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.50"
Excluding outliers - 916 stars left (next iteration limit 1007)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits N_match=916 sigma_overall_arcsec=0.544 sigma_q1_arcsec=0.617 sigma_q2_arcsec=0.705 sigma_q3_arcsec=0.510 sigma_q4_arcsec=0.451 n_q1=268 n_q2=188 n_q3=307 n_q4=153 worst_quadrant_to_overall_ratio=1.296
The image catalog is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits -region wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.a7B9cvsodX (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
WCS_IMAGE_NAME=wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
WCS-calibrated image found: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Checking if the catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat corresponding to the image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits alredy exist and is non-empty...
Catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat corresponding to the image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
WCS catalog name: wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat
Excluding image region: -1.0 -1.0 1.0 1.0 (defined in bad_region.lst)
Excluding image region: 7500.0 0.0 9576.0 6388.0 (defined in bad_region.lst)
Excluding image region: 1122.0 1550.0 1124.0 1552.0 (defined in bad_region.lst)
Excluding image region: 1637.0 2824.0 1639.0 2826.0 (defined in bad_region.lst)
Excluding image region: 1831.0 2839.0 1833.0 2841.0 (defined in bad_region.lst)
Excluding image region: 1905.0 4570.0 1907.0 4572.0 (defined in bad_region.lst)
Excluding image region: 2012.0 4693.0 2014.0 4695.0 (defined in bad_region.lst)
Excluding image region: 2397.0 4241.0 2399.0 4243.0 (defined in bad_region.lst)
Excluding image region: 2679.0 2807.0 2681.0 2809.0 (defined in bad_region.lst)
Excluding more image regions!.. (will not print them all)
Excluded a total of 31 image regions (defined in bad_region.lst).
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=155, bad_region=1513, passed=6911
Got 6911 stars (including 5312 good ones) from the SExtractor catalog wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat
util/solve_plate_with_UCAC5 got 6911 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.0'
Seting catalog search parameters based on the expected field of view 937.0 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013014 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010411 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.7)
Done reading UCAC5 zone files...
Matched 918 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 916 matched stars entering correct_measured_positions(), 913 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.50"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 916 matched stars entering correct_measured_positions(), 5662 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.49"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 373 to 428 (Dec -15.2 to -4.7)
Done reading UCAC5 zone files...
Matched 918 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 916 matched stars entering correct_measured_positions(), 5663 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.49"
Accuracy estimation diagnostic: 916 matched stars entering correct_measured_positions(), 5663 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.51"
Excluding outliers - 916 stars left (next iteration limit 1007)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
WCS_QUALITY_DIAG: file=fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits N_match=916 sigma_overall_arcsec=0.578 sigma_q1_arcsec=0.625 sigma_q2_arcsec=0.681 sigma_q3_arcsec=0.519 sigma_q4_arcsec=0.513 n_q1=270 n_q2=172 n_q3=300 n_q4=174 worst_quadrant_to_overall_ratio=1.178
The image catalog is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits -region wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits.wcscat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Skipping WCS quality comparison: not the first SExtractor pass (default.sex.telephoto_lens_vSTL)
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-01-36_20.00sec_5.00C_LIGHT_0006.fits
Saving fully-calibrated image wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-07-05_CI_Oph-06-Q2b1x1_000331_TTUQ2b1x1_3300514_HX5GJr6u/wcs_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007.fits
Preparing the HTML report for the field Oph-06-Q2b1x1 with default.sex.telephoto_lens_vSTL
Forced photometry on wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits at 17:47:17.96 -06:32:00.7: 15.57 +/- 99.00 upperlimit
Forced photometry on wcs_Oph-06-Q2b1x1_2026-05-16_03-01-38_20.00sec_-0.00C_LIGHT_0209.fits at 17:51:30.11 -06:55:16.4: 15.63 +/- 99.00 upperlimit
Forced photometry on wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits at 17:51:30.11 -06:55:16.4: 15.61 +/- 99.00 upperlimit
Forced photometry on wcs_Oph-06-Q2b1x1_2026-05-16_03-02-19_20.00sec_-0.00C_LIGHT_0210.fits at 17:47:17.96 -06:32:00.7: 15.59 +/- 99.00 upperlimit
Adding exclusion_list_local.txt__out116565.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out116573.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 59s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 2s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 116562_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
The candidate 116562_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007 did not pass the final checks
**** FOUND 17:35:30.52 -05:55:26.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 116565_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
Preparing report for the candidate 116565_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 116570_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
The candidate 116570_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007 did not pass the final checks
**** FOUND 18:03:10.37 -08:11:47.1 in the exclusion list exclusion_list_bsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 116573_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
Preparing report for the candidate 116573_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 66103_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
The candidate 66103_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007 did not pass the final checks
**** FOUND 17:59:01.60 -09:46:29.6 in the exclusion list exclusion_list_bbsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 91426_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
The candidate 91426_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007 did not pass the final checks
**** FOUND 18:03:04.84 -08:10:52.5 in the exclusion list exclusion_list_bsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 57441_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
The candidate 57441_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007 did not pass the final checks
**** FOUND 17:38:09.53 -10:55:34.6 in the exclusion list exclusion_list_bsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54337_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
The candidate 54337_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007 did not pass the final checks
**** FOUND 17:34:46.44 -11:14:31.5 in the exclusion list exclusion_list_bsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 90836_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
The candidate 90836_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007 did not pass the final checks
**** FOUND 17:37:50.85 -08:07:08.9 in the exclusion list exclusion_list_bsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 34676_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007
The candidate 34676_fd_Oph-06-Q2b1x1_2026-07-05_00-02-28_20.00sec_4.90C_LIGHT_0007 did not pass the final checks