This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Mean magnitude and position on the discovery images:
2026 04 23.2268 2461153.7268 11.71 09:05:34.51 +10:41:13.6
218.68258 34.58956 galactic Cnc Second-epoch detections are separated by 0.5" and 8.7 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.41 Daphne -1 0 1 11.9 0 0
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits at 09:05:34.51 +10:41:13.6: 15.79 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits at 09:05:34.51 +10:41:13.6: 15.75 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461153.7268,11.71,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260423.2268 11.71CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 04 23.2268 2461153.7268 13.38 08:40:59.47 +14:59:24.7
211.09043 30.89196 galactic Cnc Second-epoch detections are separated by 0.7" and 8.6 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.54 Alexandra -2 0 2 13.7 0 -0
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits at 08:40:59.47 +14:59:24.7: 16.01 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits at 08:40:59.47 +14:59:24.7: 16.03 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461153.7268,13.38,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260423.2268 13.38CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 04 23.2268 2461153.7268 13.85 08:56:54.52 +18:14:11.7
209.18682 35.64007 galactic Cnc Second-epoch detections are separated by 0.5" and 8.6 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.203 Pompeja -1 0 1 14.1 -0 0
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits at 08:56:54.52 +18:14:11.7: 16.01 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits at 08:56:54.52 +18:14:11.7: 15.98 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461153.7268,13.85,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260423.2268 13.85CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 04 23.2268 2461153.7268 14.04 08:22:18.12 +17:51:03.0
206.09900 27.83410 galactic Cnc Second-epoch detections are separated by 2.4" and 9.3 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.201 Penelope -3 0 3 14.4 -0 0
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits at 08:22:18.12 +17:51:03.0: 15.76 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits at 08:22:18.12 +17:51:03.0: 15.73 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461153.7268,14.04,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260423.2268 14.04CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Mean magnitude and position on the discovery images:
2026 04 23.2268 2461153.7268 14.73 09:00:27.10 +13:16:40.0
215.18837 34.54032 galactic Cnc Second-epoch detections are separated by 1.0" and 8.6 pix
The object was not found in VSX
The object was not found in ASASSN-V
The object was found in astcheck.773 Irmintraud -2 -1 2 14.6 -0 0
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits at 09:00:27.10 +13:16:40.0: 16.08 +/- 99.00 upperlimit
Forced photometry on wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits at 09:00:27.10 +13:16:40.0: 16.10 +/- 99.00 upperlimit
Check this position in TNS.Manually check the ASAS-SN list of transients!Search this object in SIMBAD.Search this object in VizieR catalogs.WISE atlasAladin LiteSNAD ZTF viewer
Online MPChecker may fail to identify bright comets! Please manually check the Seiichi Yoshida's and Gideon van Buitenen's pages.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461153.7268,14.73,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260423.2268 14.73CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461082.75729163 11.02.2026 06:10:19.997 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
First image: 2461082.75729163 11.02.2026 06:10:19.997 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
Last image: 2461153.72724633 23.04.2026 05:27:04.083 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 2
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.61
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 4 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
Total objects detected (at least 2 times): 9457
Objects passed selection criteria: 9428
Measurements per detected object (mean, median, min, max): 3.3 4.0 2 4
Measurements per selected object (mean, median, min, max): 3.3 4.0 2 4
Average stars detected per image: 8115.75
Average stars matched: 7905.5 (97.4094 %)
Memory usage VmPeak: 114884 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Tue Apr 21 18:08:25 CDT 2026
VaST build number 1.0rc89-27-g1ba0f777
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-04-21)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Thu Apr 23 00:29:36 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461082.75729163 11.02.2026 06:10:19.997 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
First image: 2461082.75729163 11.02.2026 06:10:19.997 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
Last image: 2461153.72724633 23.04.2026 05:27:04.083 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 39
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.31
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 18 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
Total objects detected (at least 2 times): 58647
Objects passed selection criteria: 58496
Measurements per detected object (mean, median, min, max): 3.3 4.0 2 4
Measurements per selected object (mean, median, min, max): 3.3 4.0 2 4
Average stars detected per image: 51283
Average stars matched: 49623.2 (96.7635 %)
Memory usage VmPeak: 157584 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Tue Apr 21 18:08:25 CDT 2026
VaST build number 1.0rc89-27-g1ba0f777
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-04-21)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Thu Apr 23 00:31:19 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ1b1x1/TTUQ1_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --norotation --noflagimage --starmatchraius 3.5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
SExtractor catalog cache: saved Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat to cache
SExtractor catalog cache: saved Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461153.72641865
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits exists and is non-empty
Saving wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits to local_wcs_cache/
'wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits' -> 'local_wcs_cache/wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits'
wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits exists and is non-empty
Saving wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits to local_wcs_cache/
'wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits' -> 'local_wcs_cache/wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits'
wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits exists and is non-empty
Saving wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits to local_wcs_cache/
'wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits' -> 'local_wcs_cache/wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits'
wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits exists and is non-empty
Saving wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits to local_wcs_cache/
'wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits' -> 'local_wcs_cache/wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits'
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits (1st reference image)
verification OK: wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
Image size: 941.6'x627.0' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 08:53:20.681 +13:59:51.92 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits (1st new image)
verification OK: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
Image size: 941.5'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 08:53:10.238 +14:02:00.73 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 08:53:20.681 +13:59:51.92
Second-epoch image center 08:53:10.238 +14:02:00.73
Angular distance between the image centers 0.0553 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits (2nd new image)
verification OK: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Image size: 941.5'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 08:53:13.202 +14:01:31.56 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 08:53:20.681 +13:59:51.92
Second-epoch image center 08:53:13.202 +14:01:31.56
Angular distance between the image centers 0.0410 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 08:53:10.238 +14:02:00.73
Second-epoch second image center 08:53:13.202 +14:01:31.56
Angular distance between the image centers 0.01446 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for ar aprallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits &> /tmp/tmp.XdRTiVcTcE
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits &> /tmp/tmp.tvEyMS40tR
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits &> /tmp/tmp.aT6uC1SYDX
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits &> /tmp/tmp.hmmkiKVsVU
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Calibrating the magnitude scale
Found non-empty wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits and wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits and wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
Found non-empty wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits and wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
The reference image (wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits) and catalog (wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat) found
'wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat' -> 'wcsmag.cat'
Read 9772 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 124.9313 to 141.4877 deg, Dec +8.4819 to +19.3313 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 124.9313 to 141.4877 deg, Dec 8.4819 to 19.3313 deg
Loaded 7052 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5574 out of 5900 total matches.
Matched with Tycho-2 5900 out of 9772 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.809505
a=0.000000 b=1.000000 c=22.809505
From vast_summary.log: estimated ref. image limiting mag.: -7.61
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.20
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.20
Magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 9772 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 124.9313 to 141.4877 deg, Dec +8.4819 to +19.3313 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 124.9313 to 141.4877 deg, Dec 8.4819 to 19.3313 deg
Loaded 7052 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5574 out of 5900 total matches.
Matched with Tycho-2 5900 out of 9772 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits via Tycho-2
Forced-photometry filter: calibrated wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits -> calib.txt_param_ref_wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits (aperture=6.0)
Read 9656 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 124.9313 to 141.4879 deg, Dec +8.4820 to +19.3425 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 124.9313 to 141.4879 deg, Dec 8.4820 to 19.3425 deg
Loaded 7059 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5549 out of 5886 total matches.
Matched with Tycho-2 5886 out of 9656 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits via Tycho-2
Forced-photometry filter: calibrated wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits -> calib.txt_param_ref_wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits (aperture=6.0)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 1 candidate transients before the final filtering. (Hard limit: 8000)
Median FWHM seeing for isolated stars:
2.0 pix Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
2.0 pix Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
2.2 pix fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
2.2 pix fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
2.0 pix wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
2.0 pix wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
Limiting magnitude estimates:
15.2 mag. Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
15.2 mag. Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
14.6 mag. fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
14.6 mag. fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
All-image limiting magnitude estimate: 14.6 (SNR ) 11.6 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.0 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.XdRTiVcTcE (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits' -> 'wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
WCS_IMAGE_NAME=wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
WCS-calibrated image found: wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
Checking if the catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat corresponding to the image wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits alredy exist and is non-empty...
Catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat corresponding to the image wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
WCS catalog name: wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=759, passed=9772
Got 9772 stars (including 8997 good ones) from the SExtractor catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
util/solve_plate_with_UCAC5 got 9772 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.6'
Seting catalog search parameters based on the expected field of view 941.6 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013078 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010462 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 967 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 967 matched stars entering correct_measured_positions(), 943 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 967 matched stars entering correct_measured_positions(), 9575 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 967 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 967 matched stars entering correct_measured_positions(), 9576 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.36"
Accuracy estimation diagnostic: 967 matched stars entering correct_measured_positions(), 9576 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Excluding outliers - 967 stars left (next iteration limit 1063)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits -region wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.tvEyMS40tR (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits' -> 'wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
WCS_IMAGE_NAME=wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
WCS-calibrated image found: wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
Checking if the catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat corresponding to the image wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits alredy exist and is non-empty...
Catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat corresponding to the image wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
WCS catalog name: wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=774, passed=9656
Got 9656 stars (including 8873 good ones) from the SExtractor catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat
util/solve_plate_with_UCAC5 got 9656 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 964 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 964 matched stars entering correct_measured_positions(), 941 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 964 matched stars entering correct_measured_positions(), 9493 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 964 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 964 matched stars entering correct_measured_positions(), 9491 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Accuracy estimation diagnostic: 964 matched stars entering correct_measured_positions(), 9491 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Excluding outliers - 964 stars left (next iteration limit 1060)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits -region wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.aT6uC1SYDX (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
WCS-calibrated image found: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
Checking if the catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat corresponding to the image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat corresponding to the image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
WCS catalog name: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=466, passed=6551
Got 6551 stars (including 6081 good ones) from the SExtractor catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat
util/solve_plate_with_UCAC5 got 6551 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 491 to 550 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 957 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 931 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 6318 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 491 to 550 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 957 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 6318 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 6318 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Excluding outliers - 957 stars left (next iteration limit 1052)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits -region wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.hmmkiKVsVU (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
WCS-calibrated image found: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Checking if the catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat corresponding to the image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat corresponding to the image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
WCS catalog name: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=467, passed=6665
Got 6665 stars (including 6195 good ones) from the SExtractor catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat
util/solve_plate_with_UCAC5 got 6665 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 936 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 6471 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 6468 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 6468 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Excluding outliers - 956 stars left (next iteration limit 1051)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits -region wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits'
Saving fully-calibrated image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits'
Preparing the HTML report for the field Cnc-05-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
Adding exclusion_list_local.txt__out20745.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 5s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 1s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20745_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
Preparing report for the candidate 20745_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
make_report_in_HTML.sh Phase 2 (HTML assembly): 0s
make_report_in_HTML.sh TOTAL: 6s
Prepared the HTML report for the field Cnc-05-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
09:05:34.51 +10:41:13.6
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --norotation --noflagimage --starmatchraius 3.5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
SExtractor catalog cache: saved Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat to cache
SExtractor catalog cache: saved Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
Creating symlink local_wcs_cache/wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
Creating symlink local_wcs_cache/wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
Creating symlink local_wcs_cache/wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Creating symlink local_wcs_cache/exclusion_list.txt
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits exists and is non-empty
wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits exists and is non-empty
wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits exists and is non-empty
wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits exists and is non-empty
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits (1st reference image)
verification OK: wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
Image size: 941.6'x627.0' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 08:53:20.681 +13:59:51.92 J2000 4789.000 3195.000
###################################
The image scale is 5.90"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.9"
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits (1st new image)
verification OK: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
Image size: 941.5'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 08:53:10.238 +14:02:00.73 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 08:53:20.681 +13:59:51.92
Second-epoch image center 08:53:10.238 +14:02:00.73
Angular distance between the image centers 0.0553 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# fov_of_wcs_calibrated_image.sh output for wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits (2nd new image)
verification OK: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Image size: 941.5'x626.7' 15.7(deg)x10.4(deg) 9576x6388 pix
Image scale: 5.90"/pix along the X axis and 5.89"/pix along the Y axis
Image center: 08:53:13.202 +14:01:31.56 J2000 4789.000 3195.000
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 08:53:20.681 +13:59:51.92
Second-epoch image center 08:53:13.202 +14:01:31.56
Angular distance between the image centers 0.0410 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 08:53:10.238 +14:02:00.73
Second-epoch second image center 08:53:13.202 +14:01:31.56
Angular distance between the image centers 0.01446 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for ar aprallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits &> /tmp/tmp.jTd9cuetfg
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits &> /tmp/tmp.G3CtiS7ZSE
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits &> /tmp/tmp.nHHbg5qFKA
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits &> /tmp/tmp.jsFrXBiPWY
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Calibrating the magnitude scale
Found non-empty wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits and wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits and wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
Found non-empty wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits and wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
The reference image (wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits) and catalog (wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat) found
'wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat' -> 'wcsmag.cat'
Read 61604 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 124.9313 to 141.4942 deg, Dec +8.4527 to +19.3337 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 124.9313 to 141.4942 deg, Dec 8.4527 to 19.3337 deg
Loaded 7075 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5222 out of 6038 total matches.
Matched with Tycho-2 6038 out of 61604 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.681241
a=0.000000 b=1.000000 c=22.681241
From vast_summary.log: estimated ref. image limiting mag.: -7.31
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.37
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.37
Magnitude calibration plot:
Preparing per-reference-image forced-photometry calibration (method=tycho2 band=V)
Read 61604 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 124.9313 to 141.4942 deg, Dec +8.4527 to +19.3337 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 124.9313 to 141.4942 deg, Dec 8.4527 to 19.3337 deg
Loaded 7075 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5222 out of 6038 total matches.
Matched with Tycho-2 6038 out of 61604 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits via Tycho-2
Forced-photometry filter: calibrated wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits -> calib.txt_param_ref_wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits (aperture=4.6)
Read 61596 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 124.9313 to 141.5003 deg, Dec +8.4590 to +19.3425 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 124.9313 to 141.5003 deg, Dec 8.4590 to 19.3425 deg
Loaded 7077 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 5215 out of 6040 total matches.
Matched with Tycho-2 6040 out of 61596 detected stars.
util/calibrate_single_image_with_tycho2.sh: calibrated wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits via Tycho-2
Forced-photometry filter: calibrated wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits -> calib.txt_param_ref_wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits (aperture=4.6)
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 36 candidate transients before the final filtering. (Hard limit: 8000)
Median FWHM seeing for isolated stars:
1.8 pix Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
1.8 pix Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
2.0 pix fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
2.0 pix fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
1.8 pix wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
1.8 pix wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
Limiting magnitude estimates:
15.4 mag. Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
15.4 mag. Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
14.7 mag. fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
14.8 mag. fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
All-image limiting magnitude estimate: 14.7 (SNR ) 14.2 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.0 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.jTd9cuetfg (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits' -> 'wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
WCS_IMAGE_NAME=wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
WCS-calibrated image found: wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
Checking if the catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat corresponding to the image wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits alredy exist and is non-empty...
Catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat corresponding to the image wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits
WCS catalog name: wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=19, blended=3469, passed=61585
Got 61585 stars (including 58012 good ones) from the SExtractor catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat
util/solve_plate_with_UCAC5 got 61585 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.6'
Seting catalog search parameters based on the expected field of view 941.6 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013078 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010462 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 963 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 963 matched stars entering correct_measured_positions(), 941 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 963 matched stars entering correct_measured_positions(), 60529 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 963 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 963 matched stars entering correct_measured_positions(), 60528 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
Accuracy estimation diagnostic: 963 matched stars entering correct_measured_positions(), 60528 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.37"
Excluding outliers - 963 stars left (next iteration limit 1059)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits -region wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-10-19_20.00sec_-15.00C_LIGHT_0235.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.G3CtiS7ZSE (6) ############
Parsing command line arguments...
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits 573.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits' -> 'wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
WCS_IMAGE_NAME=wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
WCS-calibrated image found: wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
Checking if the catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat corresponding to the image wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits alredy exist and is non-empty...
Catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat corresponding to the image wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits
WCS catalog name: wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=29, blended=3459, passed=61567
Got 61567 stars (including 57993 good ones) from the SExtractor catalog wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat
util/solve_plate_with_UCAC5 got 61567 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 961 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 961 matched stars entering correct_measured_positions(), 941 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 961 matched stars entering correct_measured_positions(), 60507 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 492 to 548 (Dec 8.5 to 19.3)
Done reading UCAC5 zone files...
Matched 961 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 961 matched stars entering correct_measured_positions(), 60504 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.39"
Accuracy estimation diagnostic: 961 matched stars entering correct_measured_positions(), 60505 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.38"
Excluding outliers - 961 stars left (next iteration limit 1057)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits -region wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-05-Q1b1x1_2026-02-11_00-11-00_20.00sec_-14.90C_LIGHT_0236.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.nHHbg5qFKA (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
WCS-calibrated image found: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
Checking if the catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat corresponding to the image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat corresponding to the image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
WCS catalog name: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=9, blended=1678, passed=41538
Got 41538 stars (including 39801 good ones) from the SExtractor catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat
util/solve_plate_with_UCAC5 got 41538 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.2 to 19.7)
Done reading UCAC5 zone files...
Matched 955 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 934 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.31"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 40410 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.2 to 19.7)
Done reading UCAC5 zone files...
Matched 955 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 40407 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 40407 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Excluding outliers - 955 stars left (next iteration limit 1050)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits -region wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.jsFrXBiPWY (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
WCS-calibrated image found: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Checking if the catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat corresponding to the image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat corresponding to the image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
WCS catalog name: wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=11, blended=1725, passed=41734
Got 41734 stars (including 39946 good ones) from the SExtractor catalog wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat
util/solve_plate_with_UCAC5 got 41734 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.5'
Seting catalog search parameters based on the expected field of view 941.5 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013076 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010461 (37.7 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 957 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 932 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.33"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 40641 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 490 to 550 (Dec 8.2 to 19.6)
Done reading UCAC5 zone files...
Matched 957 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 40641 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.32"
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 40639 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Excluding outliers - 957 stars left (next iteration limit 1052)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits -region wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-25-52_20.00sec_-5.00C_LIGHTs_0061.fits
Saving fully-calibrated image wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-04-23_CI_Cnc-05-Q1b1x1_002807_TTUQ1b1x1_937365_hCNahYqj/wcs_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062.fits
Preparing the HTML report for the field Cnc-05-Q1b1x1 with default.sex.telephoto_lens_vSTL
Adding exclusion_list_local.txt__out77150.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out77564.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out77806.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out77956.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 7s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 3s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76201_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 76201_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 09:18:58.05 +11:37:01.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76203_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 76203_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:41:54.16 +17:05:23.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76206_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 76206_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 09:06:48.56 +17:36:30.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76208_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 76208_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:50:39.02 +19:08:34.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76212_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 76212_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 09:16:55.41 +17:38:23.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76486_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 76486_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 09:05:34.51 +10:41:13.6 in the exclusion list exclusion_list_local.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76704_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 76704_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:51:25.76 +11:49:06.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 76986_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 76986_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:21:48.28 +13:37:44.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77017_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77017_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:49:32.77 +12:08:57.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77082_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77082_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:43:57.57 +19:01:04.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77150_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
Preparing report for the candidate 77150_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77204_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77204_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 09:17:20.70 +16:32:07.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77259_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77259_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:43:42.85 +16:53:19.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77264_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77264_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:43:08.96 +14:05:36.8 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77314_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77314_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:56:54.69 +09:14:44.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77326_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77326_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 09:05:14.14 +14:15:44.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77329_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77329_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:29:22.86 +11:17:00.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77339_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77339_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:27:58.30 +11:43:20.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77366_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77366_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:45:37.58 +09:16:25.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77393_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77393_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:35:37.72 +14:37:37.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77419_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77419_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:37:49.39 +09:09:37.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77436_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77436_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:43:51.43 +18:22:00.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77489_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77489_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:49:56.30 +14:48:29.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77512_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77512_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:22:30.30 +13:09:16.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77564_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
Preparing report for the candidate 77564_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77567_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77567_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 09:03:45.26 +09:54:15.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77699_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77699_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:45:55.23 +11:26:05.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77741_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77741_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:43:02.54 +14:28:06.5 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77752_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77752_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:54:31.03 +15:35:53.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77785_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77785_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:42:55.50 +14:05:53.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77806_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
Preparing report for the candidate 77806_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77906_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77906_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:39:23.61 +16:32:03.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77951_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77951_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:50:26.76 +15:19:20.8 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77956_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
Preparing report for the candidate 77956_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77962_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77962_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks
**** FOUND 08:52:02.41 +14:36:05.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 77965_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062
The candidate 77965_fd_Cnc-05-Q1b1x1_2026-04-23_00-27-04_20.00sec_-5.00C_LIGHTs_0062 did not pass the final checks