This analysis is done by the script util/transients/transient_factory_test31.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d
The list of candidates will appear below. Please manually reload the page every few minutes untill the 'Processing complete' message appears.
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461144.6825,13.65,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260414.1825 13.65CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461144.6825,14.18,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260414.1825 14.18CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 04 14.1825* 09 36 03.79 +26 11 48.8 14.2 U Leo 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461144.6825,14.17,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260414.1825 14.17CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461144.6825,14.30,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260414.1825 14.30CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 04 14.1825* 09 28 21.94 +24 20 41.4 14.5 U Leo 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461144.6825,14.47,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260414.1825 14.47CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461144.6825,14.39,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260414.1825 14.39CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
TCP 2026 04 14.1825* 09 43 34.88 +19 54 06.5 14.6 U Leo 9 0
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461144.6825,14.62,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260414.1825 14.62CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
Don't forget to copy the leading white spaces and change the observatory code!
The code 'C32' is 'Ka-Dar Observatory, TAU Station, Nizhny Arkhyz', the code '500' is the geocenter.
Make sure there are no trailing white spaces after the observatory code.
The string should be exactly 80 characters long to conform to the MPC format.
Mean position:
You may copy/paste the above measurements to the following online services: MPChecker (in case the button does not work) NEOCMTChecker (NEO's and comets) sat_id2 (artificial satellites; needs at least two observations to work) fitsblink_satellites (art. sat.; you'll need to save the astrometry as a text file and upload it)
Here is a stub line for reporting a new transient to the TOCP.
Don't forget to set the constellation name and the number of days since the last non-detection!
Don't forget to change the observer code for the AAVSO and VSNET format data!
**** AAVSO file format ****
#TYPE=EXTENDED
#OBSCODE=SKA
#SOFTWARE=VaST 1.0rc90 transient pipeline
#DELIM=,
#DATE=JD
#NAME,DATE,MAG,MERR,FILT,TRANS,MTYPE,CNAME,CMAG,KNAME,KMAG,AMASS,GROUP,CHART,NOTES
VARIABLE_NAME,2461144.6825,14.63,0.05,CV,NO,STD,ENSEMBLE,na,na,na,na,1,na,NMW-TexasTech Camera-1 135mm f/2.2 telephoto lens + QHY600M CMOS
**** VSNET file format ****
# Here are some valid formatiing examples:
#CETFZ 20230815.9829 <13.5CV NMW
#CETFZ 20230818.9746 12.5CV NMW
#CETFZ 20230819.9732 12.6CV NMW
#TCPJ17453768-1756253 20230831.7290 12.7CV NMW
VARIABLE_NAME 20260414.1825 14.63CV NMW
The AAVSO data should be submitted to https://www.aavso.org/webobs
The VSNET data, depending on how interesting the target is, should be e-mailed to
vsnet-alert@ooruri.kusastro.kyoto-u.ac.jp
vsnet-outburst-wanted@ooruri.kusastro.kyoto-u.ac.jp
vsnet-obs@ooruri.kusastro.kyoto-u.ac.jp
# Time-series data may be sent to vsnet-campaign-report@ooruri.kusastro.kyoto-u.ac.jp
## VaST run with SExtractor config file default.sex.telephoto_lens_onlybrightstars_v1 ##
Images processed 4
Images used for photometry 4
Ref. image: 2461119.67641736 20.03.2026 04:13:52.460 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
First image: 2461119.67641736 20.03.2026 04:13:52.460 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
Last image: 2461144.68295973 14.04.2026 04:23:17.721 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 5
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.61
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 3 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 10.0 # minimum number of pixels above threshold
DETECT_THRESH 10.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 10.0 # or , in mag.arcsec-2
SATUR_LEVEL 55000.0 # level (in ADUs) at which arises saturation
GAIN 0.37 # detector gain in e-/ADU
Total objects detected (at least 2 times): 9186
Objects passed selection criteria: 9183
Measurements per detected object (mean, median, min, max): 3.5 4.0 2 4
Measurements per selected object (mean, median, min, max): 3.5 4.0 2 4
Average stars detected per image: 8370.25
Average stars matched: 8207 (98.0496 %)
Memory usage VmPeak: 114596 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Sun Apr 12 15:05:06 CDT 2026
VaST build number 1.0rc89-12-g393f88de
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-04-12)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Mon Apr 13 23:25:13 CDT 2026
Host name: tau
############################################################
## VaST run with SExtractor config file default.sex.telephoto_lens_vSTL ##
Images processed 4
Images used for photometry 4
Ref. image: 2461119.67641736 20.03.2026 04:13:52.460 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
First image: 2461119.67641736 20.03.2026 04:13:52.460 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
Last image: 2461144.68295973 14.04.2026 04:23:17.721 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
JD time system (TT/UTC/UNKNOWN): UTC
Transient candidates found: 145
FILTER key from ref. img. header: CV
Magnitude scale: instrumental
Estimated ref. image limiting mag.: -7.36
Magnitude-Size filter: Disabled
For each source choose aperture with the smallest scatter: YES
Photometric errors rescaling: NO
Number of identified bad images: 0
Number of SysRem iterations: 0
User-specified moving object: none
Computation time: 18 seconds
Number of parallel threads: 24
SExtractor parameter file: default.sex
Some important SExtractor parameters:
DETECT_MINAREA 2.0 # minimum number of pixels above threshold
DETECT_THRESH 3.0 # or , in mag.arcsec-2
ANALYSIS_THRESH 3.0 # or , in mag.arcsec-2
SATUR_LEVEL 57000.0 # level (in ADUs) at which arises saturation
GAIN 0.83 # detector gain in e-/ADU
WEIGHT_TYPE BACKGROUND
Total objects detected (at least 2 times): 48120
Objects passed selection criteria: 48003
Measurements per detected object (mean, median, min, max): 3.6 4.0 2 4
Measurements per selected object (mean, median, min, max): 3.7 4.0 2 4
Average stars detected per image: 45328.5
Average stars matched: 43381 (95.7036 %)
Memory usage VmPeak: 145792 kB
Software: VaST 1.0rc90 compiled with gcc (Gentoo 15.2.1_p20260214 p5) 15.2.1 20260214
VaST compiled on Sun Apr 12 15:05:06 CDT 2026
VaST build number 1.0rc89-12-g393f88de
OpenMP enabled: Yes
SExtractor version 2.19.5 (2026-04-12)
GNU bash, version 5.3.9(1)-release (x86_64-pc-linux-gnu)
Processing completed on Mon Apr 13 23:26:06 CDT 2026
Host name: tau
############################################################
Updating neverexclude_list.txt
'/var/www/nmw_calibration/neverexclude_list.txt' -> './neverexclude_list.txt'
Choosing bad regions list
'/var/www/nmw_calibration/TTUQ1b1x1/TTUQ1_bad_region.lst' -> 'bad_region.lst'
wait
*------ default.sex.telephoto_lens_onlybrightstars_v1 ------*
'default.sex.telephoto_lens_onlybrightstars_v1' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_onlybrightstars_v1
./vast --norotation --noflagimage --starmatchraius 3.5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
SExtractor catalog cache: saved Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat to cache
SExtractor catalog cache: saved Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_onlybrightstars_v1
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Checking WCS cache directory local_wcs_cache
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
The reference JD(UT) for computing planet and comet positions: 2461144.68208301
Re-using ../asassn_transients_list.txt
'../asassn_transients_list.txt' -> 'asassn_transients_list.txt'
Re-using ../tocp_transients_list.txt
'../tocp_transients_list.txt' -> 'tocp_transients_list.txt'
Re-using ../tns_transients_list.txt
'../tns_transients_list.txt' -> 'tns_transients_list.txt'
Plate-solving the images
wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits exists and is non-empty
Saving wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits to local_wcs_cache/
'wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits' -> 'local_wcs_cache/wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits'
wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits exists and is non-empty
Saving wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits to local_wcs_cache/
'wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits' -> 'local_wcs_cache/wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits'
wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits exists and is non-empty
Saving wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits to local_wcs_cache/
'wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits' -> 'local_wcs_cache/wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits'
wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits exists and is non-empty
Saving wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits to local_wcs_cache/
'wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits' -> 'local_wcs_cache/wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits'
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 09:14:05.815 +22:02:06.51
Second-epoch image center 09:13:52.521 +22:00:03.20
Angular distance between the image centers 0.0617 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 09:14:05.815 +22:02:06.51
Second-epoch image center 09:13:50.273 +22:00:30.29
Angular distance between the image centers 0.0657 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 09:13:52.521 +22:00:03.20
Second-epoch second image center 09:13:50.273 +22:00:30.29
Angular distance between the image centers 0.01149 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for ar aprallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits &> /tmp/tmp.ySNfX9P9jx
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits &> /tmp/tmp.YiwNfeaHeJ
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits &> /tmp/tmp.L7BpJ9GX4D
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits &> /tmp/tmp.M5YXTA2woR
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Calibrating the magnitude scale
Found non-empty wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits and wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits and wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
Found non-empty wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits and wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
The reference image (wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits) and catalog (wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat) found
'wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat' -> 'wcsmag.cat'
Read 9535 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 129.8640 to 147.3424 deg, Dec +16.4979 to +27.3084 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 129.8640 to 147.3424 deg, Dec 16.4979 to 27.3084 deg
Loaded 5782 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4541 out of 4760 total matches.
Matched with Tycho-2 4760 out of 9535 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.922618
a=0.000000 b=1.000000 c=22.922618
From vast_summary.log: estimated ref. image limiting mag.: -7.61
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.31
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.31
Magnitude calibration plot:
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 4 candidate transients before the final filtering. (Hard limit: 3000)
Median FWHM seeing for isolated stars:
2.5 pix Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
2.3 pix Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
2.1 pix fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
2.1 pix fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Limiting magnitude estimates:
15.3 mag. Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
15.3 mag. Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
15.2 mag. fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
15.2 mag. fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
All-image limiting magnitude estimate: 15.2 (SNR ) 12.1 (80% of stars) with default.sex.telephoto_lens_onlybrightstars_v1
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.0 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.ySNfX9P9jx (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits 570.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits' -> 'wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
WCS_IMAGE_NAME=wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
WCS-calibrated image found: wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
Checking if the catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat corresponding to the image wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits alredy exist and is non-empty...
Catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat corresponding to the image wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
WCS catalog name: wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=608, passed=9535
Got 9535 stars (including 8921 good ones) from the SExtractor catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
util/solve_plate_with_UCAC5 got 9535 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.2'
Seting catalog search parameters based on the expected field of view 937.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013017 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010413 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 945 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.44"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 9417 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.43"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 9417 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.43"
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 9417 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.42"
Excluding outliers - 956 stars left (next iteration limit 1051)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits -region wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.YiwNfeaHeJ (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits 570.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits' -> 'wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
WCS_IMAGE_NAME=wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
WCS-calibrated image found: wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
Checking if the catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat corresponding to the image wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits alredy exist and is non-empty...
Catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat corresponding to the image wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
WCS catalog name: wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=669, passed=9214
Got 9214 stars (including 8536 good ones) from the SExtractor catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat
util/solve_plate_with_UCAC5 got 9214 stars from the SExtractor catalog
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/util/fov_of_wcs_calibrated_image.sh: line 144: echo: write error: Broken pipe
Updated FoV from the plate-solved image: 937.2'
Seting catalog search parameters based on the expected field of view 937.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013017 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010413 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 944 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.48"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 9116 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 9117 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 9117 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
Excluding outliers - 956 stars left (next iteration limit 1051)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits -region wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.L7BpJ9GX4D (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
WCS-calibrated image found: wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
Checking if the catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat corresponding to the image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat corresponding to the image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
WCS catalog name: wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=556, passed=7946
Got 7946 stars (including 7381 good ones) from the SExtractor catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat
util/solve_plate_with_UCAC5 got 7946 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.2'
Seting catalog search parameters based on the expected field of view 941.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013072 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010458 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 530 to 589 (Dec 16.2 to 27.5)
Done reading UCAC5 zone files...
Matched 960 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 960 matched stars entering correct_measured_positions(), 947 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 960 matched stars entering correct_measured_positions(), 7818 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 530 to 589 (Dec 16.2 to 27.5)
Done reading UCAC5 zone files...
Matched 960 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 960 matched stars entering correct_measured_positions(), 7819 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Accuracy estimation diagnostic: 960 matched stars entering correct_measured_positions(), 7819 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.26"
Excluding outliers - 960 stars left (next iteration limit 1056)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits -region wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.M5YXTA2woR (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
WCS-calibrated image found: wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Checking if the catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat corresponding to the image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat corresponding to the image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
WCS catalog name: wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=0, blended=451, passed=7021
Got 7021 stars (including 6557 good ones) from the SExtractor catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat
util/solve_plate_with_UCAC5 got 7021 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.2'
Seting catalog search parameters based on the expected field of view 941.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013072 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010458 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 530 to 589 (Dec 16.2 to 27.5)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 933 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 6826 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 530 to 589 (Dec 16.2 to 27.5)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 6827 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.27"
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 6827 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.25"
Excluding outliers - 956 stars left (next iteration limit 1051)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits -region wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits'
Saving fully-calibrated image wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits'
Saving fully-calibrated image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits'
Saving fully-calibrated image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
'wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits' -> '/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits'
Preparing the HTML report for the field Cnc-03-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
make_report_in_HTML.sh Phase 1 (network queries): 1s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 0s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20314_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 20314_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:18:15.44 +18:23:12.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20398_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 20398_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:51:57.83 +25:43:04.8 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20554_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 20554_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:57:16.06 +26:42:47.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 20599_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 20599_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:48:25.84 +26:40:43.1 in the exclusion list exclusion_list.txt ****
make_report_in_HTML.sh Phase 2 (HTML assembly): 0s
make_report_in_HTML.sh TOTAL: 1s
Prepared the HTML report for the field Cnc-03-Q1b1x1 with default.sex.telephoto_lens_onlybrightstars_v1
*------ done with default.sex.telephoto_lens_onlybrightstars_v1 ------*
#### The local exclusion list is exclusion_list_local.txt ####
wait
*------ default.sex.telephoto_lens_vSTL ------*
'default.sex.telephoto_lens_vSTL' -> 'default.sex'
Starting VaST with default.sex.telephoto_lens_vSTL
./vast --norotation --noflagimage --starmatchraius 3.5 --matchstarnumber 500 --selectbestaperture --sysrem 0 --type 4 --maxsextractorflag 99 --UTC --nofind --nojdkeyword /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
SExtractor catalog cache: saved Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat to cache
SExtractor catalog cache: saved Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat to cache
VaST run complete with default.sex.telephoto_lens_vSTL
The four input images were /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Checking WCS cache directory local_wcs_cache
Found WCS cache directory local_wcs_cache
Creating symlink local_wcs_cache/wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
Creating symlink local_wcs_cache/wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
Creating symlink local_wcs_cache/wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
Creating symlink local_wcs_cache/wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Creating symlink local_wcs_cache/exclusion_list.txt
Checking WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Found WCS cache directory /mnt/usb/NMW_NG/solved_reference_images
Checking WCS cache directory /home/NMW_web_upload/solved_reference_images
Checking WCS cache directory /dataX/kirx/NMW_NG_rt3_autumn2019/solved_reference_images
Plate-solving the images
wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits exists and is non-empty
wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits exists and is non-empty
wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits exists and is non-empty
wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits exists and is non-empty
The image scale is 5.87"/pix, setting the soft and hard astrometric limits for filtering second-epoch detections: 5.9" and 8.8"
###################################
# Check the image center offset between the reference and the first second-epoch image (pointing accuracy)
Reference image center 09:14:05.815 +22:02:06.51
Second-epoch image center 09:13:52.521 +22:00:03.20
Angular distance between the image centers 0.0617 deg.
Soft limit: 0.50 deg. Hard limit: 1.00 deg.
###################################
###################################
# Check the image center offset between the reference and the second second-epoch image (pointing accuracy)
Reference image center 09:14:05.815 +22:02:06.51
Second-epoch image center 09:13:50.273 +22:00:30.29
Angular distance between the image centers 0.0657 deg.
###################################
###################################
# Check the image center offset between the first and the second second-epoch image (shift should be applied between the second-epoch images)
Second-epoch first image center 09:13:52.521 +22:00:03.20
Second-epoch second image center 09:13:50.273 +22:00:30.29
Angular distance between the image centers 0.01149 deg.
###################################
Running solve_plate_with_UCAC5...
Preparing for ar aprallel run
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits &> /tmp/tmp.ZztftRZ80w
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits &> /tmp/tmp.PWhoaWRmPK
Parallel run for /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits &> /tmp/tmp.KpfTEYhTp5
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
Running util/solve_plate_with_UCAC5 --no_photometric_catalog --iterations 2 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits &> /tmp/tmp.8aaS0NlXT5
Parallel run for /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Calibrating the magnitude scale
Found non-empty wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
____ Start of magnitude calibration ____
PHOTOMETRIC_CALIBRATION=TYCHO2_V
Calibrating the magnitude scale with Tycho-2 stars
util/transients/transient_factory_test31.sh is checking for the presence of non-empty wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits and wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
Tycho-2 catalog is found at lib/catalogs/tycho2
Tycho-2 catalog and the derived bright star exclusion list are ready
Checking for the presence of non-empty wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits and wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
Found non-empty wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits and wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
The reference image (wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits) and catalog (wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat) found
'wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat' -> 'wcsmag.cat'
Read 46595 stars from the SExtractor catalog wcsmag.cat
Detected star coordinate range: RA 129.8641 to 147.3716 deg, Dec +16.4979 to +27.3180 deg
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.00
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.01
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.02
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.03
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.04
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.05
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.06
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.07
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.08
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.09
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.10
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.11
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.12
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.13
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.14
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.15
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.16
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.17
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.18
Reading Tycho2 catalog file lib/catalogs/tycho2/tyc2.dat.19
Tycho-2 catalog search boundaries: RA 129.8641 to 147.3716 deg, Dec 16.4979 to 27.3180 deg
Loaded 5800 Tycho-2 stars within the image boundaries (VT and BT non-zero).
Relation between the catalog and instrumental magnitudes is written to calib.txt
Stars used for magnitude calibration (good matches): 4255 out of 4779 total matches.
Matched with Tycho-2 4779 out of 46595 detected stars.
The calibration function type and coefficients are written to calib.txt_param
util/calibrate_magnitude_scale 0.000000 1.000000 22.813580
a=0.000000 b=1.000000 c=22.813580
From vast_summary.log: estimated ref. image limiting mag.: -7.36
Updating vast_summary.log: Estimated ref. image limiting mag.: 15.45
Updated vast_limiting_magnitude.log with calibrated magnitudes
Working...
Please, PLEASE, be patient!!!
All lightcurves processed! =)
Estimated ref. image limiting mag.: 15.45
Magnitude calibration plot:
____ End of magnitude calibration ____
Applying consolidated magnitude filters...
Preparing the exclusion lists for this field
Done with filtering
Found 119 candidate transients before the final filtering. (Hard limit: 3000)
Median FWHM seeing for isolated stars:
2.4 pix Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
2.1 pix Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
2.0 pix fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
2.0 pix fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Limiting magnitude estimates:
15.5 mag. Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
15.5 mag. Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
15.4 mag. fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
15.3 mag. fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
All-image limiting magnitude estimate: 15.3 (SNR ) 14.6 (80% of stars) with default.sex.telephoto_lens_vSTL
The first estimate is the magnitude of a star detected with a signal-to-noise ratio of following Karpov (2025, Acta Polytechnica, 65, 50).
This value should be representative of the faintest stars clearly visible in the image.
The brighter of the limiting magnitude estimates for the two second-epoch images is reported here.
The second estimate is the 80th percentile of the magnitude distribution of stars detected on all four images.
This value is representative of the faintest object that may enter the candidate transients list.
The hard cut-off for the candidate transients is 15.0 mag.
Waiting for UCAC5 plate solver
wait
############ /tmp/tmp.ZztftRZ80w (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits 570.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits' -> 'wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
WCS_IMAGE_NAME=wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
WCS-calibrated image found: wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
Checking if the catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat corresponding to the image wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits alredy exist and is non-empty...
Catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat corresponding to the image wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
WCS catalog name: wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=26, blended=2637, passed=46569
Got 46569 stars (including 43881 good ones) from the SExtractor catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat
util/solve_plate_with_UCAC5 got 46569 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.2'
Seting catalog search parameters based on the expected field of view 937.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013017 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010413 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 957 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 946 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 957 matched stars entering correct_measured_positions(), 45924 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.44"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 957 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 45924 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.44"
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 45904 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.44"
Excluding outliers - 956 stars left (next iteration limit 1052)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits -region wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.PWhoaWRmPK (6) ############
Parsing command line arguments...
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits is already a symlink and we do not allow symlinks on symlinks
The guess is based on the existing WCS header.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits 570.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
WARNING from replace_file_with_symlink_if_filename_contains_white_spaces() the input file /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits is already a symlink and we do not allow symlinks on symlinks
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
verification OK: /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
It's a known telescope with plate solutions that are supposed to be good.
The input image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits has a WCS header - will blindly trust it is good...
'/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits' -> 'wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits'
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
WCS_IMAGE_NAME=wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
WCS-calibrated image found: wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
Checking if the catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat corresponding to the image wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits alredy exist and is non-empty...
Catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat corresponding to the image wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
WCS catalog name: wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=21, blended=2639, passed=48657
Got 48657 stars (including 45943 good ones) from the SExtractor catalog wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat
util/solve_plate_with_UCAC5 got 48657 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 937.2'
Seting catalog search parameters based on the expected field of view 937.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013017 (46.9 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010413 (37.5 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 944 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 956 matched stars entering correct_measured_positions(), 48059 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 532 to 588 (Dec 16.5 to 27.3)
Done reading UCAC5 zone files...
Matched 956 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 48056 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.46"
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 48038 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.47"
Excluding outliers - 955 stars left (next iteration limit 1051)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/reference_imgs/Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits -region wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.KpfTEYhTp5 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
WCS-calibrated image found: wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
Checking if the catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat corresponding to the image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat corresponding to the image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
WCS catalog name: wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=18, blended=2041, passed=45699
Got 45699 stars (including 43578 good ones) from the SExtractor catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat
util/solve_plate_with_UCAC5 got 45699 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.2'
Seting catalog search parameters based on the expected field of view 941.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013072 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010458 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 530 to 589 (Dec 16.1 to 27.5)
Done reading UCAC5 zone files...
Matched 959 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 959 matched stars entering correct_measured_positions(), 947 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 959 matched stars entering correct_measured_positions(), 45001 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 530 to 589 (Dec 16.1 to 27.5)
Done reading UCAC5 zone files...
Matched 959 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 959 matched stars entering correct_measured_positions(), 45001 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.29"
Accuracy estimation diagnostic: 959 matched stars entering correct_measured_positions(), 45001 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Excluding outliers - 959 stars left (next iteration limit 1054)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits -region wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
############ /tmp/tmp.8aaS0NlXT5 (6) ############
Parsing command line arguments...
The minor axis of the CCD chip should be 24.0 mm based on the derived pixel size of 3.8 um
Internal estimated FoV 605.3'
The guess is based on the FOCALLEN keyword.
Trying to blindly solve the plate (local solve-field or remote server)...
/data_ssd/NMW-TexasTech/workdir/vast_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/util/wcs_image_calibration.sh /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits 605.0
Entering WCS image calibration mode.
ORIGINAL_FITSFILE=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
FITSFILE before on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
verification OK: /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
It's not one of the telescopes that are know to produce images with good WCS solutions - will try to re-solve!
FITSFILE after on_the_fly=/data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
WCS_IMAGE_NAME=wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
WCS-calibrated image found: wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Checking if the catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat corresponding to the image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits alredy exist and is non-empty...
Catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat corresponding to the image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits found.
The catalog is in the new format, as expected.
The plate-solved (WCS-calibrated) image is saved to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
util/solve_plate_with_UCAC5 is preparing to read a catalog corresponding to the image /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
WCS catalog name: wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat
SExtractor catalog parsing summary: zero_flux=0, no_flux_err=0, no_mag=0, no_mag_err=0, low_SNR=9, blended=1725, passed=41747
Got 41747 stars (including 39958 good ones) from the SExtractor catalog wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat
util/solve_plate_with_UCAC5 got 41747 stars from the SExtractor catalog
Updated FoV from the plate-solved image: 941.2'
Seting catalog search parameters based on the expected field of view 941.2 arcmin
UCAC5 catalog search parameters:
catalog_search_parameters->search_radius_deg= 0.013072 (47.1 arcsec)
catalog_search_parameters->brightest_mag= 1.00
catalog_search_parameters->faintest_mag= 13.50
catalog_search_parameters->search_radius_second_step_deg 0.010458 (37.6 arcsec)
ITERATION 01 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 530 to 589 (Dec 16.2 to 27.6)
Done reading UCAC5 zone files...
Matched 955 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 933 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Removing outliers...
Correcting the measured astrometric positions...
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 40814 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
ITERATION 02 -- talking to VizieR, this might be slow!
UCAC5 search strategy: trying local copy first
Found a local copy of UCAC5
Reading UCAC5 zone files...
Searching UCAC5 zones 530 to 589 (Dec 16.2 to 27.6)
Done reading UCAC5 zone files...
Matched 955 stars with the local copy of UCAC5.
The local UCAC5 search seems to be a success
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 40815 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.30"
Accuracy estimation diagnostic: 955 matched stars entering correct_measured_positions(), 40815 with non-zero local correction accuracy
Estimated accuracy of the plate solution: 0.28"
Excluding outliers - 955 stars left (next iteration limit 1050)
Stop iterations.
The field is successfully solved and matched with the astrometric catalog! :)
The image catalog is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat.ucac5
The DS9 region file with the matched stars is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat.ds9.reg
You may view it with the command:
ds9 /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits -region wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat.ds9.reg
The astrometric residuals vector field is written to wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits.cat.astrometric_residuals
Option '-n' not using photometric catalogs, just stick with astrometry
opt '-i': 2 is the maximum number of iterations
Copying WCS-calibrated images back to input directory
Saving fully-calibrated image wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/wcs_Cnc-03-Q1b1x1_2026-03-19_23-13-52_20.00sec_-14.90C_LIGHT_0144.fits
Saving fully-calibrated image wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/wcs_Cnc-03-Q1b1x1_2026-03-19_23-14-46_20.00sec_-15.00C_LIGHT_0145.fits
Saving fully-calibrated image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-22-01_20.00sec_-4.90C_LIGHTs_0115.fits
Saving fully-calibrated image wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
INFO: FPACK_FULLY_CALIBRATED_IMAGE=no (not compressing the image)
The destination file is already there - not rewriting /data_ssd/NMW-TexasTech/workdir//img_2026-04-13_CI_Cnc-03-Q1b1x1_232416_TTUQ1b1x1_30802_7A1YXE9d/wcs_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116.fits
Preparing the HTML report for the field Cnc-03-Q1b1x1 with default.sex.telephoto_lens_vSTL
Adding exclusion_list_gaiadr2.txt__out54566.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out54567.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out54575.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out54598.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55281.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55512.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55584.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55603.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55691.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55837.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55919.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55947.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55962.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out55994.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out56005.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out56027.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out56100.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out56110.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_gaiadr2.txt__out56120.dat to exclusion_list_gaiadr2.txt
Adding exclusion_list_local.txt__out55174.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out55498.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out55504.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out55578.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out55608.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out55665.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out55738.dat to exclusion_list_local.txt
Adding exclusion_list_local.txt__out55810.dat to exclusion_list_local.txt
make_report_in_HTML.sh Phase 1 (network queries): 9s
Pre-generating preview images in parallel...
Done pre-generating preview images.
Pre-generating finding charts in parallel...
Done pre-generating finding charts.
make_report_in_HTML.sh Pre-generation: 6s
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54566_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54566_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:49:30.66 +27:04:00.4 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.75, MAG_FAINT_SEARCH_LIMIT=15.73)GAIADR2_OUTPUT=# 1.481 691284611315163648 132.37771143037 +27.06718760834 14.7530 14.2728 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#1.481#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54567_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54567_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:20:27.04 +20:07:08.5 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.78, MAG_FAINT_SEARCH_LIMIT=15.76)GAIADR2_OUTPUT=# 0.161 637350988990599936 140.11269995095 +20.11899587165 14.5565 14.0539 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.161#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54575_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54575_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:26:25.32 +24:54:40.1 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.79, MAG_FAINT_SEARCH_LIMIT=15.77)GAIADR2_OUTPUT=# 0.633 645538875988512256 141.60560398764 +24.91099034689 14.8877 14.2967 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.633#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54580_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54580_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:46:46.56 +25:41:46.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54584_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54584_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:24:41.41 +23:32:20.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54586_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54586_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:04:06.99 +19:40:41.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54587_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54587_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
Rejecting candidate due to large distance (15.0") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54588_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54588_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:26:01.69 +18:15:51.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54589_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54589_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:57:32.59 +26:06:05.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54591_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54591_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:51:58.85 +26:47:35.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54592_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54592_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:57:09.55 +27:05:30.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54593_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54593_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:58:09.35 +26:53:03.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54598_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54598_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:17:55.46 +20:03:06.7 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=13.14, MAG_FAINT_SEARCH_LIMIT=14.12)GAIADR2_OUTPUT=# 0.429 636047788538356992 139.48104816629 +20.05174664867 13.2040 12.8217 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.429#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54599_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54599_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:16:17.75 +18:22:04.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54601_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54601_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:25:14.51 +18:45:01.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54602_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54602_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:18:15.48 +18:23:11.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54912_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54912_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:53:58.55 +17:40:29.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54960_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54960_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:11.97 +26:20:32.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54962_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54962_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:35.42 +25:04:08.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54964_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54964_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:44:52.85 +23:21:48.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 54996_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 54996_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:48:27.71 +26:40:40.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55001_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55001_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:13:28.00 +25:25:03.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55064_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55064_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:38.66 +23:59:16.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55082_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55082_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:42:15.76 +24:29:18.8 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55102_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55102_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:06:40.56 +26:56:18.5 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55118_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55118_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:48:05.49 +18:35:39.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55121_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55121_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:20:35.04 +22:39:16.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55139_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55139_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:12:51.64 +17:27:46.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55145_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55145_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:10:55.85 +18:54:57.5 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55173_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55173_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:02:17.61 +26:12:34.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55174_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
Preparing report for the candidate 55174_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55201_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55201_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:44:04.22 +24:54:05.5 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55217_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55217_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:13:57.11 +16:58:21.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55222_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55222_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:40:46.92 +19:07:38.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55238_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55238_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:27:45.65 +26:42:53.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55244_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55244_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:00:13.58 +25:37:27.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55281_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55281_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:31:41.80 +20:42:14.2 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=13.83, MAG_FAINT_SEARCH_LIMIT=14.81)GAIADR2_OUTPUT=# 0.854 634780708762263424 142.92391679315 +20.70390341007 13.8159 13.1719 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.854#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55293_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55293_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:46:47.32 +21:15:06.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55301_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55301_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:46:05.94 +20:49:40.8 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55310_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55310_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:32:55.33 +23:22:07.5 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55358_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55358_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:24:28.49 +19:04:53.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55368_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55368_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:50:05.94 +17:51:21.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55374_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55374_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:36:06.79 +24:56:56.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55379_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55379_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:37:11.10 +21:24:18.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55381_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55381_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:57:29.94 +21:22:13.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55429_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55429_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:46:25.94 +25:54:48.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55488_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55488_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:11:13.96 +18:40:40.5 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55490_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55490_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:56:50.43 +27:03:59.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55498_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
Preparing report for the candidate 55498_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55500_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55500_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:17:52.18 +25:59:42.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55504_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
Preparing report for the candidate 55504_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55512_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55512_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:41:41.85 +21:20:57.1 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.29, MAG_FAINT_SEARCH_LIMIT=15.27)GAIADR2_OUTPUT=# 1.589 640683574374870912 145.42400282549 +21.34946780108 14.5180 14.3792 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#1.589#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55517_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55517_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:15:17.56 +21:21:36.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55552_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55552_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:18:59.82 +19:06:22.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55578_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
Preparing report for the candidate 55578_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55584_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55584_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:21:20.52 +19:25:28.0 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.37, MAG_FAINT_SEARCH_LIMIT=15.35)GAIADR2_OUTPUT=# 1.373 635759892586190720 140.33538454509 +19.42407905358 14.4366 13.9552 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#1.373#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55599_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55599_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:42:33.23 +26:39:17.8 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55603_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55603_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:49.09 +24:14:59.1 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.54, MAG_FAINT_SEARCH_LIMIT=15.52)GAIADR2_OUTPUT=# 0.810 690281787991329664 130.45478775617 +24.24973481203 14.5357 13.9063 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.810#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55608_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
Preparing report for the candidate 55608_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55612_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55612_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:44:54.60 +27:11:59.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55633_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55633_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:11:41.20 +26:18:26.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55634_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55634_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:42:01.79 +27:05:39.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55637_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55637_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:22.33 +24:55:23.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55640_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55640_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:24:17.35 +20:33:57.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55643_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55643_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:25.50 +26:45:52.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55646_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55646_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:45:12.86 +26:56:59.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55662_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55662_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:42:23.90 +27:04:60.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55665_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
Preparing report for the candidate 55665_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55671_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55671_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:45:25.61 +26:42:32.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55673_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55673_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:14.15 +26:56:36.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55680_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55680_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:44:56.03 +21:31:48.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55691_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55691_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:10:50.98 +24:10:10.5 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.66, MAG_FAINT_SEARCH_LIMIT=15.64)GAIADR2_OUTPUT=# 1.155 687333069603260160 137.71250259615 +24.16927232064 14.8323 14.2536 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#1.155#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55730_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55730_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:23:35.40 +25:12:19.8 in the exclusion list exclusion_list_bsc.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55738_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
Preparing report for the candidate 55738_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55754_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55754_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:42:28.40 +26:25:04.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55769_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55769_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:49:16.95 +26:39:10.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55776_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55776_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:42:09.95 +26:50:46.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55778_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55778_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:07.76 +25:50:49.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55779_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55779_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:40.60 +25:58:00.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55784_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55784_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:50:19.27 +24:34:53.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55799_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55799_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:35.14 +26:12:42.8 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55807_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55807_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:50:18.95 +26:00:14.5 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55810_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
Preparing report for the candidate 55810_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55816_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55816_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:56:21.89 +27:08:27.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55829_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55829_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:55.50 +25:49:09.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55837_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55837_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:45:07.10 +27:07:30.0 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.80, MAG_FAINT_SEARCH_LIMIT=15.78)GAIADR2_OUTPUT=# 0.432 703338591650099328 131.27967375858 +27.12508894235 14.7957 14.2761 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.432#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55841_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55841_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:25.23 +24:23:54.9 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55871_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55871_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:39:49.80 +21:30:31.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55883_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55883_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:13.09 +26:07:09.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55900_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55900_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:49.82 +27:03:18.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55902_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55902_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:42:41.41 +24:31:40.7 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55915_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55915_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:42:26.55 +26:03:02.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55919_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55919_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:45:06.21 +23:09:18.3 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.82, MAG_FAINT_SEARCH_LIMIT=15.80)GAIADR2_OUTPUT=# 0.911 689405545942978176 131.27613776324 +23.15500831744 14.8823 14.4064 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.911#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55936_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55936_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:15:44.36 +17:07:24.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55941_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55941_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:02:43.78 +25:25:14.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55947_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55947_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:42:09.52 +24:44:24.3 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.81, MAG_FAINT_SEARCH_LIMIT=15.79)GAIADR2_OUTPUT=# 0.172 690522031281944704 130.53962444683 +24.74011162295 14.7967 14.1596 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.172#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55960_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55960_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:44:11.75 +26:43:53.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55962_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55962_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:51:07.09 +26:51:05.3 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.90, MAG_FAINT_SEARCH_LIMIT=15.88)GAIADR2_OUTPUT=# 0.976 692728201363141504 132.77925802853 +26.85156976350 14.9148 14.2369 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.976#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55973_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55973_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 09:24:27.17 +17:41:42.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55982_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55982_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:19.59 +25:54:20.6 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55984_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55984_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:57.61 +26:13:15.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55988_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55988_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:46:19.78 +26:24:56.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55989_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55989_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:31.85 +24:30:01.1 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 55994_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 55994_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:45:32.74 +20:37:20.0 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.96, MAG_FAINT_SEARCH_LIMIT=15.94)GAIADR2_OUTPUT=# 0.198 661780419373951104 131.38638605018 +20.62217537243 14.9906 14.4923 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.198#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56002_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56002_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:47:44.15 +25:44:38.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56005_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56005_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:08.31 +21:31:59.9 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.83, MAG_FAINT_SEARCH_LIMIT=15.81)GAIADR2_OUTPUT=# 0.397 664946428746289920 130.28472696356 +21.53336181802 15.0184 14.4993 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.397#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56027_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56027_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:01.01 +25:58:29.1 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.90, MAG_FAINT_SEARCH_LIMIT=15.88)GAIADR2_OUTPUT=# 0.871 702761760362436608 130.25439631382 +25.97457691872 14.7778 14.3111 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.871#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56043_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56043_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:49:04.88 +26:40:51.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56071_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56071_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:45:47.03 +25:43:22.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56100_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56100_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:47:47.58 +27:12:46.2 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.99, MAG_FAINT_SEARCH_LIMIT=15.97)GAIADR2_OUTPUT=# 1.494 703310691542644608 131.94852638010 +27.21249893228 15.0328 14.5445 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#1.494#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56106_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56106_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:37.09 +26:56:04.3 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56110_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56110_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:49.48 +26:29:04.4 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.81, MAG_FAINT_SEARCH_LIMIT=15.79)GAIADR2_OUTPUT=# 0.867 703177581915703424 130.95604869328 +26.48477189735 14.9715 14.4875 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#0.867#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56113_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56113_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:35.98 +26:59:06.4 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56118_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56118_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:43:01.14 +26:52:32.0 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56120_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56120_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:46:23.83 +24:10:31.5 in Gaia DR2 single (GAIA_DR2_CLIENT=#vizquery#, MAG_MEAN=14.90, MAG_FAINT_SEARCH_LIMIT=15.88)GAIADR2_OUTPUT=# 1.359 690321404769331072 131.59890952612 +24.17527204005 14.9137 14.2938 NOT_AVAILABLE#N_GAIA_STARS_WITIN_BLEND_SEARCH_RADIUS=#1#DISTANCE_ARCSEC=#1.359#MAX_ANGULAR_DISTANCE_BETWEEN_MEASURED_POSITION_AND_CATALOG_MATCH_ARCSEC=#5.9#
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56127_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56127_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:41:14.73 +26:18:26.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56129_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56129_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
Rejecting candidate due to large distance (14.2") between the two second-epoch detections
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 56146_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 56146_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
**** FOUND 08:42:49.11 +25:39:30.2 in the exclusion list exclusion_list.txt ****
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Considering the candidate 44271_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116
The candidate 44271_fd_Cnc-03-Q1b1x1_2026-04-13_23-23-17_20.00sec_-4.90C_LIGHTs_0116 did not pass the final checks
